Safety and PPE Items are Available

Order Now

Frigidaire Dishwasher Troubleshooting - PartsIPS

frigidaire dishwasher troubleshooting

Frigidaire offers both built-in and portable dishwashers with various features including energy-efficient and delay start cycles. Is your Frigidaire dishwasher facing problems and don't know where to find a solution? In this blog, we have shown you some of the most common Frigidaire dishwasher problems and troubleshooting tips.

Get All Frigidaire Dishwasher Parts at low Prices Order Now...

Frigidaire Dishwasher Troubleshooting Guide

If your Frigidaire dishwasher doesn't start, you may have a power or water issue. You can fix these problems without professional assistance so which saves you money if a warranty is expired.

a)Door is not closed

Generally, your dishwasher won't start if you have not closed the door completely. So, push the door in place properly and then press the Start or Resume button. Try to push in any racks sticking out too far and push any dishes that block the door. Still, the door is not closing, you have to check the door gaskets and clean them if they are dirty. Check if the food particles or detergent may build up on the gasket surface. Also, see if the gaskets are damaged or torn, replace the gaskets if required.

b)Power issues

Sometimes a Frigidaire dishwasher not starting is not a dishwasher problem but a power supply problem. Perform these simple checks to first rule out any problems with your power source.

Make sure the power cord is plugged in completely into the outlet. Better to avoid using extension cords to power your unit as most can't safely accommodate the voltage required.

Check your outlet is getting power by plugging in a lamp or other device. If it's not getting power, then you have inspected the circuit breaker, fuses, and replace any that are blown.

c)Water supply issues

If your appliance is not turning on, first see if the water supply valve is turned on. You have to replace it when it is stuck or won't turn.

Check the water inlet hoses and straighten them if kinked. Also, examine if the hoses are badly crushed, Replace with new ones.

You have to clean out the water inlet hose if it is dirty or limescale is buildup.

Now, test the pressure of the water with a pressure gauge. If it is below 30 psi, shut off the water supply to other appliances and wait for some time for the water pressure to return to normal before starting the dishwasher.

d)Incorrect dishwasher settings

Make sure to double-check that you have selected the right cycle.

Check the code on the display panel. Some dishwasher models have a delayed start option or child lock setting that prevents it from turning on immediately. If these settings are activated, press the Cancel button before starting the correct cycle.

If the touchpad or control panel gets wet that causes damage and disrupts communication with your unit. Take professional service to fix this issue.

Not Cleaning Dishes

Not cleaning the dishes is one of the most common in Frigidaire dishwasher problems. Read on to find out the causes and possible solutions to fix them.

a)Faulty water inlet valve

This valve is used to allow water to pour into the dishwasher tub at different times while operating. So, when this valve becomes clogged or defective, the unit won't get enough water to clean the dishes properly.

To determine that valve is defective, place some dishes in the ranks and pour a couple of quarts of water into the bottom hub. Now, run your Frigidaire appliance. If your dishes come out clean and unspotted, it has to be considered as the water valve is restricted and should be replaced. Even you clean the inlet valve, it doesn't give an optimum level of performance.

b)Clogged or defective wash arm

Food particles may lead to clogging the tiny holes located on the lower wash arm obstructing water flow. So, by using a bristle brush or pipe cleaner, you have to remove the food particles.

c)Damaged wash arm support

In many models of Frigidaire dishwashers, water goes to the wash arm through a support tube. The water doesn't reach the water supply tube nozzle if the support tube is damaged. Moreover, it obstructs the water flow. So, the remedy is to replace the damaged wash arm support.

d)Damaged impeller

In the dishwasher, the circulation pump uses an impeller to force the water through the wash arm. When this impeller is broken, it can't generate enough pressure to push the water and reduce the supply of water amount to clean dishes. You can replace the impeller as per the model number without the need of replacing the pump.

Also, check the circulation pump motor and replace it if necessary.

Frigidaire Dishwasher Error Codes

Nowadays, the Frigidaire dishwashers come with a built-in diagnostic system. They display the current issues with a series of error codes. Here are some common Frigidaire dishwasher error codes that display and troubleshooting tips.

i10 - Low fill. Check the water supply line for pinches.

i20, i40 & iF0 - Indicates that the appliance has clogged filters or drain line error.

i30 - Indicates that there is overflow or leak in the bottom rack. So, check the water inlet valve for loose connections.

i50, i60 & iC0 - Drain or wash motor error. Water heating system error. Electronic control system error. For this problem, cancel your cycle and restart. Restart the machine if required.

UO/ UF - Vent is open or fan error. So, verify for loose connections between the control board and vent assembly. Replace vent assembly if it is damaged. Also, solve the Frigidaire dishwasher control board problems with the help of a professional.

You can check more error codes and troubleshooting tips in your Frigidaire dishwasher repair manual.


How do you reset a Frigidaire dishwasher?

Find the cancel button on the far right of the control panel. Hold down the cancel button for at least three seconds or until the light display changes or disappears. Now, wait for five minutes before turning on the dishwasher. If turning ON the appliance doesn't work, switch off the circuit breaker. Next, switch the circuit breaker back on and check the display.

How do I run a diagnostic on my Frigidaire dishwasher?

Want to put a Frigidaire dishwasher in diagnostic mode? Your machine should be in idle or power failure mode when you need to initiate the self-diagnostic mode. Next, press the Hi-Temp wash button and then press the Start or Cancel button for a second. Finally, the test mode will start if you used the button correctly.

Why is my Frigidaire dishwasher not draining?

  • Because of a clogged drained hose.
  • The knockout plug might be removed from inside the food waste disposer inlet.
  • The drain is not kinked could be the cause.
  • The cycle status might be in pause mode. Ensure the dishwasher cycle is complete.
  • Glass trap or filter is not maintained correctly or improper installation with no clogs.

Why is my Frigidaire dishwasher locked?

If your unit is locked, just press and hold the heated dry button for five seconds. Now, check if the control panel is unlocked. If that does not work, then consider that your display control board is shorted. You will need to replace the display board to fix the problem.

Does Frigidaire dishwasher have a reset button?

In your Frigidaire dishwasher, the heating element heats up the water to operating temperature. When the water does not reach the correct temperature after a set amount of time, a light on the control panel will start flashing. So, check for the heating element damage.

Low Cost on all Frigidaire Spare Parts Get them Now


Hope this Frigidaire dishwasher troubleshooting guide will help you to solve the common issues. If it's unable to fix, you can take the Frigidaire professional dishwasher troubleshooting tips. When you need to replace Frigidaire dishwasher parts, pick PartsIPS. Here, we offer OEM and quality Frigidaire parts online to the customers.

About the Author


Haritha is Content Writer at PartsIPS. She has a great understanding of today's marketing strategies that yield strong results and always happy to create valuable content & share her thoughts. She was best in writing content for E-Commerce websites related to Appliance Parts, Food Service Parts, HVAC Parts, Electrical Parts, etc.

You can go through some of her best contributions on, and

Preset Color