Model: ZV42ISH1SS

GE Bezel - Part# WB08X10039 is a replacement part for a range of GE ovens. It is a black plastic bezel that fits around the oven door handle and helps to keep the handle in place. The bezel also helps to protect the handle from damage and wear. This part is designed to fit select GE oven models, i...

The GE Filter Baffle - Part# WB02X10874 is a replacement part for GE range hoods. It is a metal filter baffle that helps to direct air flow and capture grease and other particles from the air. The filter baffle fits into the range hood and is designed to be easy to remove and clean. The filter baf...

The GE Filter Baffle - Part# WB02X10877 is a replacement part for select GE and Hotpoint brand range hoods. It is designed to help keep grease and other debris from entering the range hood motor and filter. The filter baffle helps to ensure that the range hood operates at peak efficiency. The filt...

GE Grease Tray 36" - Part# WB02X10875 is a replacement part for a range or oven. It is a metal tray that is designed to catch grease and other debris that may accumulate during the cooking process. The tray measures 36 inches in length and is made of stainless steel. It has a non-stick coating to ...

GE Grease Tray 48" - Part# WB02X10878 is a replacement part for GE ovens. It is a metal tray that is designed to catch grease and other food particles that may fall from the oven during cooking. The tray measures 48 inches in length and is made of stainless steel. It has a sloped design to help en...

The GE Indicator Light - Part# WB08X10033 is a replacement part for many GE microwave ovens. It is a small, round, plastic light that is used to indicate when the oven is in use. The light is usually located on the front of the oven and will turn on when the oven is turned on and off when it is tu...

The GE Knob Assembly - Part# WB03X10163 is a replacement part for many GE and Hotpoint brand stoves and ovens. It is a black plastic knob with a chrome-colored metal insert that is used to control the temperature of the stove or oven. The knob has a white indicator line that lines up with the temp...

The GE Knob Assembly Zinc Die Cast - Part# WB03X10261 is a replacement part for many GE and Hotpoint brand stoves. It is a knob assembly that is made of zinc die cast material and has a black finish. The knob assembly includes the knob, the shaft, and the clip. The knob is used to control the temp...

GE LAMP HLDR SUPPORT W/CLIP - Part# WB08X10038 is a replacement part for a range hood light. It is used to hold the light bulb in place and provide electrical connection to the bulb. The part includes a clip that attaches to the range hood and holds the lamp holder in place. The clip also provides...

GE LAMPHOLDER Part# WB08X10030 is a replacement part for GE microwaves. It is a two-piece assembly that includes the lampholder and the socket. The lampholder is made of plastic and metal and is designed to hold the light bulb in place in the microwave. The socket is made of metal and has two term...

The GE Monogram Logo is a logo that is used to identify products made by General Electric (GE). The logo consists of two parts: the GE Monogram and the Part# WB02X10832. The GE Monogram is a stylized letter “G” with an “E” inside it. This logo has been used by GE since its founding in 1892 and is ...

GE Switch Motor/Lamp Part# WB24X10110 is a replacement part for General Electric ovens. It is a two-wire motor and lamp assembly that controls the light and fan in the oven. The motor and lamp are connected to a switch on the oven control panel. When the switch is turned on, the motor turns on and...

GE TOP COVER - Part# WB02X11050 is a replacement part for GE ovens. It is the top cover of the oven, which is made of stainless steel and is designed to protect the interior components from dust, dirt, and other debris. The top cover also helps to keep heat in the oven and prevent it from escaping...

A range hood hardware kit (Part# WB01X10255) is a set of components used to install a range hood. It includes all the necessary hardware for mounting the range hood, such as screws, nuts, bolts, washers, and other fasteners. The kit also includes a template for cutting the hole in the wall or ceil...