Model: ZISW480DXA

GE Air Handler Asm Qc - Part# WR31X10017 is a quality control assembly for a GE air handler. It is designed to ensure that the air handler is operating correctly and efficiently. The assembly includes a number of components, such as a blower motor, blower wheel, filter grille, fan blade, and other...

GE Board LED Light Assembly (Part# WR55X11007) is a replacement part for GE refrigerators. It is a circuit board with an LED light attached to it. The LED light is used to illuminate the interior of the refrigerator when the door is opened. The circuit board contains several components, including ...

GE Bracket and Valve Assembly (Part# WR57X10084) is a genuine OEM part used in refrigerators to support the water valve and provide a secure connection between the valve and the refrigerator. This part is made of durable plastic and includes mounting screws for easy installation. It is compatible ...

GE Bucket & Auger A02 - Part# WR17X11410 is a part for a GE refrigerator. It is the bucket and auger assembly that helps to dispense ice from the refrigerator. The bucket and auger are connected to the ice maker and are responsible for collecting, storing, and dispensing the ice cubes. The bucket ...

The GE Compressor VCC3 REPL. KI - Part# WR87X10111 is a replacement compressor for GE refrigerators. It is a 1/6 HP, 115V, 60 Hz, single-phase motor with a maximum speed of 3100 RPM. The compressor has an oil capacity of 8 ounces and is designed to replace the original compressor in GE refrigerato...

The GE Drive Auger Dispenser - Part# WR02X11937 is a replacement part for GE refrigerators. It is a plastic auger that dispenses ice from the ice maker. The auger is driven by a motor and gearbox assembly, which rotates the auger to push the ice out of the dispenser. The part includes the auger, m...

GE FZ SLIDE ASM LH - Part# WR72X10190 is a left-hand slide assembly for a GE refrigerator. It is used to support the refrigerator door and allow it to open and close smoothly. The part is made of durable plastic and includes two slides, one on each side of the door. It also includes a mounting bra...

GE FZ SLIDE ASM RH - Part# WR72X10189 is a replacement part for a GE refrigerator. It is the right-hand side slide assembly for the freezer drawer. This part includes the slide rail, mounting bracket, and screws. It is used to secure the freezer drawer in place and allow it to slide in and out of ...

The GE Gasket Door - Part# WR24X10203 is a replacement part for a variety of GE refrigerators. It is a black rubber gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket helps to ensure that the refrigerator maintains an optimal temperature for food storag...

The GE Gasket Door (Part# WR24X10206) is a replacement part for GE refrigerators. It is a black rubber gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is designed to fit most GE refrigerators and can be easily installed with a few simple tools. The g...

The GE Heater Thaw 36/42/48 - Part# WR51X10098 is a replacement part for refrigerators. It is used to defrost the evaporator coils in the refrigerator. The part number indicates that it is designed to fit 36, 42, and 48 inch wide refrigerators. The heater thaw helps to keep the evaporator coils fr...

The GE Ice Bin Frt - Part# WR17X11198 is a replacement part for GE refrigerator models. It is the front ice bin assembly, which includes the ice bucket, the auger, and the ice chute. The ice bin holds the ice cubes and dispenses them when needed. The auger helps to move the cubes from the bin to t...

The GE KIT DAMPER MONOGRAM (Part# WR49X10107) is a replacement part for refrigerators. It is a damper assembly kit that helps to regulate the air flow in the refrigerator. The kit includes a damper, mounting bracket, and screws. The damper is designed to open and close depending on the temperature...

The GE Motor Crusher Dispenser (Part# WR60X10262) is a motorized ice crusher and dispenser designed for use with select GE side-by-side refrigerators. This motorized ice crusher and dispenser is designed to quickly and easily crush and dispense cubed or crushed ice. The motorized crusher is powere...

GE Power Supply PCB - Part# WR23X10622 is a power supply board for a variety of GE refrigerators. It is responsible for providing power to the refrigerator’s various components, such as the compressor, evaporator fan motor, and ice maker. The board also contains a number of relays and switches tha...

The GE SPACER FZ SHELF 48 - Part# WR17X11190 is a replacement part for General Electric refrigerators. It is a shelf spacer that is used to support the shelves in the refrigerator. The spacer is made of plastic and measures 48 inches in length. It has two slots on each end that fit into the slots ...

GE Spring Closure Part# WR02X12948 is a replacement part for GE refrigerators. It is a spring-loaded closure that is used to secure the refrigerator door in place. The spring closure helps to keep the door closed and prevents it from swinging open. It also helps to keep the cold air inside the ref...

GE Water Tank Assembly (Part# WR17X12702) is a genuine OEM replacement part for GE refrigerators. This water tank assembly is used to store and dispense cold water from the refrigerator. It includes the water tank, the float, and the valve. The float is used to regulate the amount of water in the ...