Model: ZIFS360NHARH

The GE Actuator Arm FF Door - Part# WR02X10948 is a replacement part for General Electric (GE) brand refrigerators. It is an actuator arm that is used to open and close the freezer door. The arm is made of plastic and has a metal rod attached to it. The rod connects to the door latch mechanism, al...

GE BIN DOOR FF - Part# WR71X10139 is a replacement part for GE refrigerator models. It is the freezer door bin, which is a storage compartment located on the inside of the freezer door. This part is made of plastic and has a white finish. It measures approximately 17 inches wide by 5 inches deep a...

GE BIN, DOOR FF - Part# WR71X10140 is a replacement part for a General Electric refrigerator. It is the door bin, or shelf, that attaches to the inside of the refrigerator door. This part is made of plastic and measures approximately 11 inches wide by 4 inches deep. It has two clips on the back th...

GE BIN, FF DOOR - Part# WR71X10138 is a replacement part for a General Electric (GE) refrigerator. It is the bin and door assembly for the freezer section of the refrigerator. The part number WR71X10138 is used to identify this specific part. This part includes the bin, door, and mounting hardware...

The GE Board Asm Main Control - Part# WR55X23354 is a main control board for a variety of GE refrigerators. This board is responsible for controlling the temperature, defrost cycle, and other functions of the refrigerator. It is designed to replace older boards that may have failed or become damag...

GE Bracket and Valve Assembly (Part# WR57X10084) is a genuine OEM part used in refrigerators to support the water valve and provide a secure connection between the valve and the refrigerator. This part is made of durable plastic and includes mounting screws for easy installation. It is compatible ...

GE Bushing, SHO - Part# WR01X10048 is a replacement part for General Electric (GE) appliances. It is a small rubber bushing that fits between the shaft and the outer housing of the appliance. The bushing helps to reduce vibration and noise, as well as providing a seal to keep dust and dirt out of ...

GE Door Gasket SD (Part# WR78X20986) is a replacement part for GE refrigerators. It is a rubber gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is designed to fit around the perimeter of the refrigerator door and create an airtight seal. It is made o...

GE EVAP COIL - Part# WR85X10017 is a replacement evaporator coil for GE refrigerators. It is designed to replace the original evaporator coil in GE refrigerators and freezers. The evaporator coil is responsible for cooling the air inside the refrigerator or freezer by absorbing heat from the air a...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Refrigerator Compressor Mount INVERTER BOARD ASSMBLY - Part# WR55X11138 is a part used in refrigerators to control the compressor motor. It is an inverter board assembly that is mounted on the compressor and helps regulate the speed of the moto...

GE Motor DC Evap Fan Asm - Part# WR60X10284 is a motor assembly for evaporator fans in refrigerators. It is designed to replace the original motor in GE and Hotpoint brand refrigerators. The motor assembly includes a fan blade, motor, mounting bracket, and wiring harness. The fan blade circulates ...

GE SCREW - Part# WR01X10057 is a replacement part for a variety of GE appliances. It is a small, metal screw that is used to secure the front panel of the appliance to the frame. The screw measures 1/4 inch in diameter and is 1/2 inch long. It has a Phillips head and is made of steel. This part is...

GE STUD SPRING FF DOOR - Part# WR01X10258 is a replacement part for a General Electric refrigerator. It is the spring that holds the door in place on the refrigerator. The spring is made of metal and is designed to fit into the door frame of the refrigerator. It helps to keep the door closed and p...

GE TUBULAR SS HANDLE ASM - Part# WR12X10949 is a stainless steel handle assembly manufactured by General Electric (GE). It is used in various GE appliances such as refrigerators, freezers, ovens, and dishwashers. The handle assembly includes a tubular handle, two screws, and a mounting bracket. Th...

GE Water Filter MWFP is a genuine OEM (Original Equipment Manufacturer) water filter designed to reduce contaminants from your drinking water. It is certified by NSF International to reduce chlorine taste and odor, sediment, lead, cysts, turbidity, and other contaminants. The filter also helps to ...

GE Wheel Asm. - Part# WR2X8377 is a replacement part for General Electric (GE) washing machines. It is a wheel assembly that helps to support the agitator in the washer. The wheel assembly consists of two parts: the hub and the wheel. The hub is made of plastic and has a metal shaft that connects ...

A monogram badge, also known as a logo badge, is a small emblem or logo that is used to identify a company, organization, or individual. The monogram badge typically consists of two or three letters that are arranged in a specific order and style. The monogram badge Part# WB02K10295 is an official...