Model: ZGU384NSM1SS

CORD RANGE - Part# WB08T10015 is a range cord that is used to connect an electric range or dryer to a power source. It is a three-pronged cord that has two flat blades and one round pin. The flat blades are the hot wires and the round pin is the neutral wire. This cord is UL listed and rated for u...

The GE Base Burner Part# WB16T10044 is a replacement part for a gas range. It is a flat, round burner base that fits into the range top and supports the burner grate. The base is made of metal and has four mounting holes for attaching the burner grate. It also has four small tabs that fit into slo...

The GE Base Burner 18K-Simmer Part# WB16T10047 is a replacement part for a range or cooktop. It is designed to provide a low, even heat for simmering and melting delicate foods. The burner has an 18,000 BTU output and features a cast iron grate with an enamel finish. The burner also has a built-in...

GE Cap Burner Part# WB13T10067 is a replacement part for GE gas ranges. It is a burner cap that fits over the burner head to help distribute heat evenly and protect the burner from spills. The cap is made of durable porcelain-coated steel and has a flat surface with four slots to allow air flow. I...

The GE Gas Cooktop Manifold Seal (Part# WB04T10065) is a replacement part for a variety of GE gas cooktops. It is a rubber seal that fits between the manifold and the cooktop surface. The seal helps to prevent gas leaks and keep the cooktop from becoming too hot. It also helps to reduce noise from...

GE Igniter Part# WB13T10077 is a replacement part for gas ovens and ranges. It is a flat, rectangular-shaped igniter with two wire leads that connect to the oven safety valve. The igniter works by drawing electrical current through the valve to open it when the oven is turned on. This allows gas t...

GE Module Spark Part# WB13T10078 is a replacement part for a variety of GE ovens. It is a spark module that controls the spark ignition system in the oven. The spark module sends an electrical signal to the spark igniter, which then ignites the gas in the oven burner. This part is used to replace ...

The GE Orifice Spud (Ng Simmer) Part# WB28T10159 is a replacement part for gas ranges. It is used to regulate the flow of gas from the burner to the flame. The orifice spud is a small metal tube with a hole in the center that controls the amount of gas that passes through it. The size of the hole ...

GE Orifice Spud LP Main (Part# WB28T10117) is a replacement part for gas ranges. It is used to regulate the flow of gas from the main gas line to the burner. The orifice spud LP main is a brass fitting that has an adjustable needle valve, which can be used to adjust the flow of gas to the burner. ...

GE Orifice Spud LP Main (Part# WB28T10118) is a replacement part for a gas range. It is used to regulate the flow of gas from the main gas line to the burner. The orifice spud LP main is designed to fit into the opening of the burner and has a threaded connection that allows it to be securely atta...

GE SCR 8-18 GX PNT-15 1/2 N - Part# WB01T10105 is a 15.5 inch range surface element manufactured by General Electric. It is a dual surface element with 8 inches on one side and 18 inches on the other side. The element has a power rating of 2500 watts and is designed to fit most GE, Hotpoint, and R...

GE SCREW 8-32 MCH PNT15 - Part# WB01T10104 is a type of screw manufactured by General Electric. It is an 8-32 machine screw with a 15 degree point and a zinc plated finish. The 8-32 size indicates that the screw has an 8 thread per inch (TPI) pitch and a diameter of 0.164 inches. The 15 degree poi...

GE SCREW SIMMER MAIN HD - Part# WB01T10092 is a replacement part for General Electric (GE) gas ranges. It is the main simmer control valve, which is used to regulate the flow of gas to the burners. The part includes a mounting bracket and screws, and it is designed to fit specific GE models. This ...

GE SEAL CONTROL - Part# WB04T10064 is a part used in GE ovens to control the oven door seal. It is a replacement part for many GE oven models and is designed to keep the oven door sealed tightly when closed. The part consists of a plastic frame with two metal clips that attach to the oven door fra...

The GE Spring Igniter (Part# WB09T10011) is a replacement part for gas ovens and ranges. It is a flat, metal igniter with a spring-loaded design that is used to ignite the gas in the oven or range. The igniter works by drawing electrical current through the oven safety valve to open it and allow g...

The GE Washer Igniter Part# WB02T10323 is a replacement part for General Electric washing machines. It is an igniter that helps to ignite the gas in the washer's burner assembly. The igniter works by heating up to a high temperature, which causes the gas to ignite and create heat for the washer. T...