Model: ZGP486LDR5SS

GE Bezel Knob - Part# WB07K10299 is a replacement part for General Electric (GE) ovens. It is a black plastic knob with a chrome-colored bezel that fits onto the front of the oven control panel. The knob is used to adjust the temperature and other settings on the oven. It has a metal shaft that in...

GE Blower Tangential 45 - Part# WB26K10013 is a blower motor assembly for use in many GE and Hotpoint brand ovens. It is designed to circulate air within the oven cavity, ensuring even temperatures throughout the cooking process. The motor assembly includes a tangential blower wheel, a mounting br...

GE Blower Tangential 45Mm - Part# WB26K10012 is a blower motor manufactured by General Electric. It is designed to be used in a variety of applications, including furnaces, air conditioners, and heat pumps. The motor is designed to provide reliable and efficient operation for years of service. It ...

GE Brace Anti Tip is a safety device designed to prevent stoves and ranges from tipping over. It is a metal bracket that attaches to the back of the range and to the wall behind it. The bracket helps keep the range in place, even if someone bumps into it or if there is an earthquake. The GE Brace ...

GE Bracket Anti Tip is a safety device designed to prevent stoves and ranges from tipping over. It is a metal bracket that attaches to the rear of the range or stove and then to the wall behind it. The bracket helps keep the appliance in place, even if someone bumps into it or if there is an earth...

The GE Bracket Latch (Part# WB02K10273) is a replacement part for General Electric ovens. It is used to secure the oven door in place and keep it from swinging open. The latch is made of metal and has two prongs that fit into the holes on the oven door. It also has a lever that can be used to rele...

GE CLIP TOE KICK Part# WB02K10225 is a plastic clip designed to secure the toe kick panel on GE dishwashers. The clip is made of durable plastic and features a spring-loaded design that allows for easy installation and removal. The clip is designed to fit all GE dishwashers with a toe kick panel, ...

GE COVER - Part# WB07K10431 is a replacement part for a range hood. It is made of durable plastic and is designed to fit GE range hoods. The cover helps protect the range hood from dust, grease, and other debris that can accumulate over time. It also helps keep the range hood looking clean and new...

GE GASKET DOOR 27" - Part# WB02K10221 is a replacement part for a GE oven. It is a 27-inch gasket door that fits onto the oven door to provide an airtight seal. The gasket is made of durable rubber and helps to keep heat in the oven and prevent it from escaping. This part is compatible with many G...

The GE Gasket Frame Front - Part# WB02K10195 is a replacement part for GE ovens. It is a black plastic frame that seals the front of the oven cavity to prevent heat and smoke from escaping. The frame also helps to keep the oven door closed and secure. The frame measures approximately 20 inches wid...

GE Guide Oven Rack LH (Part# WB02K10395) is a replacement part for General Electric ovens. It is the left-hand side of the oven rack, and it helps to keep food in place while cooking. The rack is made of heavy-duty steel and has a black finish. It has a non-stick coating that makes it easy to clea...

The GE Harness Burner Box - Part# WB24K10088 is a replacement part for a range or cooktop. It is designed to replace the existing burner box in order to provide a secure connection between the burner and the wiring harness. The box includes a mounting bracket, four screws, and two terminal blocks....

The GE Igniter Glowbar (Part# WB13K10030) is a replacement part for gas ovens and ranges. It is a metal bar with a ceramic end that glows red when heated by an electric current. The glowbar ignites the gas in the oven, allowing it to heat up and cook food. The glowbar is connected to the oven's el...

GE Kit Leg - Part# WB49X24032 is a replacement part for a range or oven. It is a metal leg that is used to support the range or oven and keep it level. The kit includes four legs, four screws, and four washers. The legs are adjustable so that the range or oven can be leveled on uneven surfaces. Th...

GE KNOB ASM - Part# WB03K10359 is a replacement part for General Electric (GE) range/ovens. It is a knob assembly that includes the knob, shaft, and mounting hardware. The knob is used to control the temperature of the oven. It has a black finish and features a white indicator line that shows the ...

GE KNOB ASM GRIDDLE - Part# WB03K10258 is a replacement part for GE gas griddles. It is a black plastic knob assembly that is used to control the temperature of the griddle. The knob has a chrome-plated steel shaft and a black plastic dial with temperature settings ranging from low to high. The kn...

GE KNOB ASM OVEN TMST - Part# WB03K10259 is a replacement part for General Electric ovens. It is a knob assembly that is used to control the temperature settings on the oven. The knob assembly includes a metal shaft, plastic knob, and a black plastic insert. The insert has three settings: Off, Bak...

GE LAMP HALOGEN 20W - Part# WB25T10064 is a halogen light bulb manufactured by General Electric. It is a 20 watt bulb with a G4 base and an average life of 2,000 hours. The bulb has a clear finish and produces a bright white light. It is suitable for use in accent lighting, track lighting, display...

GE Lamp Halogen ASM - Part# WB08K10016 is a replacement part for a variety of GE ovens and ranges. It is a halogen lamp assembly that provides illumination inside the oven cavity. The part includes the bulb, socket, and housing. The bulb is a 20 watt halogen bulb that provides bright white light t...

GE LATCH OVN - Part# WB02K10206 is a replacement oven door latch assembly for General Electric ovens. It is designed to replace the existing latch on the oven door and is made of durable plastic. The latch includes two parts: a hook and a catch. The hook attaches to the oven door frame and the cat...

GE LENS BEZEL - Part# WB02K10216 is a replacement part for a range of GE ovens. It is a black plastic bezel that fits around the lens of the oven light. The bezel helps to protect the lens from dirt and debris, as well as providing an aesthetically pleasing look to the oven. The part number WB02K1...

The GE Orifice Spud (Ng Simmer) Part# WB28T10159 is a replacement part for gas ranges. It is used to regulate the flow of gas from the burner to the flame. The orifice spud is a small metal tube with a hole in the center that controls the amount of gas that passes through it. The size of the hole ...

GE Plate Convection is a part number WB02T10310 and is a replacement part for a GE range. It is a convection plate that helps to evenly distribute heat throughout the oven cavity. The plate is made of stainless steel and has a non-stick coating for easy cleaning. It also has a raised lip to help k...

The GE Reed Switch PCB - Part# WB27K10367 is a printed circuit board (PCB) that contains a reed switch. A reed switch is an electrical switch operated by an applied magnetic field. It consists of a pair of contacts on ferromagnetic metal reeds in a hermetically sealed glass envelope. When the magn...

GE Rod Extension - Part# WB02K10392 is a replacement part for GE ovens. It is a metal rod that extends from the back of the oven to the front, allowing for easier access to the oven cavity. The rod is adjustable in length and can be used to extend the reach of an oven rack or shelf. It is made of ...

GE SCR 8-18 AB HW 1/2 S - Part# WB01T10115 is a replacement part for a GE range. It is a surface burner switch, which controls the heat of the surface burner on the range. The switch has 8 positions, ranging from off to high heat. It also has an adjustable knob that allows you to set the desired t...

GE SCREW 10-32 TRP 1/2 - Part# WB01K10100 is a 10-32 thread size, 1/2 inch long, truss head screw manufactured by General Electric. It is made of steel and has a zinc plated finish. The truss head design provides a low profile and wide bearing surface for increased strength and stability. This scr...

GE SCREW 8-18 AB TRPO 3/8 SS - Part# WB01K10086 is a stainless steel screw manufactured by General Electric. It is an 8-18 AB thread size, with a 3/8 inch length and a TRPO (triple-start) thread pattern. The part number for this screw is WB01K10086. This screw is designed for use in a variety of a...

GE SCREW 832 1/8 - Part# WB01K10029 is a part manufactured by General Electric (GE). It is an 8-32 x 1/8 inch screw used for securing various components in appliances. The screw is made of steel and has a zinc plated finish for corrosion resistance. It has a pan head style with a Phillips drive ty...

GE Sensor ASM - Part# WB21T10019 is a replacement part for a range or oven. It is a temperature sensor assembly that helps to regulate the temperature of the oven. The sensor monitors the air temperature inside the oven and sends a signal to the electronic control board to adjust the heating eleme...

GE Toe Kick Bottom - Part# WB07K10449 is a replacement part for the bottom of a GE refrigerator. It is made of durable plastic and is designed to fit the bottom of a GE refrigerator. The part number WB07K10449 is used to identify the specific part needed for installation. The toe kick bottom helps...

GE Toe Kick Top - Part# WB07K10448 is a replacement part for GE dishwashers. It is a plastic cover that fits over the toe kick area of the dishwasher, providing a finished look to the appliance. The part is made of durable plastic and is designed to fit most GE dishwashers. It is easy to install a...

GE Transformer Part# WB27K10298 is a replacement transformer for GE ovens. It is a 120V, 50/60 Hz, 25VA transformer that is used to provide power to the oven's electronic control board. The transformer is designed to be mounted on the back of the oven and connected to the control board via two wir...

GE Tube and Nut Asm - Part# WB28K10497 is a part used in many GE ovens. It is a tube and nut assembly that connects the oven’s gas supply line to the gas valve. The tube is made of metal and has a nut on one end that screws into the gas valve. The other end of the tube has a fitting that connects ...

HINGE DOOR LT(48) - Part# WB10K10016 is a left-handed door hinge designed for use with 48-inch wide doors. It is made of steel and has a black finish. The hinge has a 1/4 inch radius corner and is designed to fit standard door frames. It comes with two mounting screws and can be used on both inter...

HINGE DOOR RT(48) - Part# WB10K10015 is a right-hand door hinge designed for use with GE Profile and GE Café French Door Refrigerators. This part is made of durable metal and features a 48-inch length. It is designed to be used with the top hinge of the refrigerator door, and it helps to ensure th...

A monogram badge, also known as a logo badge, is a small emblem or logo that is used to identify a company, organization, or individual. The monogram badge typically consists of two or three letters that are arranged in a specific order and style. The monogram badge Part# WB02K10295 is an official...

The Range Control Panel Bracket - Part# WB02K10211 is a replacement part for a range. It is used to secure the control panel to the range. The bracket is made of metal and has two mounting holes for attaching it to the range. It also has two slots for securing the control panel in place. This part...

Range convex meter mounting, part# WB02T10293, is a mounting bracket designed to securely hold a range convex meter in place. The bracket is made of durable steel and features a black powder-coated finish for added protection against corrosion. It has two mounting holes that are spaced apart to fi...

Range Door Gasket Part# WB02K10220 is a replacement part for many GE and Hotpoint ovens. It is a rubber gasket that fits around the oven door to provide a tight seal when the door is closed. This helps to keep heat and moisture inside the oven, ensuring that food cooks evenly and quickly. The gask...

Range end cap extension, Part# WB02K10219, is a part used in the installation of a range. It is used to extend the end cap of the range to fit a wall oven or other appliance. The part is made of stainless steel and includes two screws for installation. It is designed to fit most ranges and wall ov...

Range glass bracket, Part# WB02K10218, is a part used in the installation of a range or oven. It is used to secure the glass top of the range or oven to the frame. The bracket is made of metal and has two holes for mounting screws. It also has two slots for the glass top to fit into. This part is ...

The Range Griddle Plate (Part# WB07K10295) is a replacement part for select GE and Hotpoint ranges. It is a flat, rectangular cooking surface that fits over the range's existing burners. The griddle plate is made of cast iron and has a non-stick coating for easy cleaning. It can be used to cook pa...

Range Injection Bracket - Part# WB02K10192 is a part used in the installation of a range or oven. It is designed to provide support for the range or oven, and to help ensure that it is properly secured in place. The bracket is made of metal and has two mounting holes on either side. It also has tw...

The Range Oven Bezel, Part# WB03K10307, is a replacement part for a range oven. It is a plastic bezel that goes around the front of the oven and is used to cover up any gaps between the oven and the countertop. The bezel also helps to protect the oven from spills and other debris. It is designed t...

Range oven nipple, Part# WB02K10227, is a part used in gas ranges and ovens. It is a short length of metal pipe with two threaded ends. The threads on one end are used to connect the nipple to the gas valve, while the other end is used to connect the range or oven to the gas supply line. The nippl...