Model: ZGP304LR5SS

The GE Base Burner Part# WB16T10044 is a replacement part for a gas range. It is a flat, round burner base that fits into the range top and supports the burner grate. The base is made of metal and has four mounting holes for attaching the burner grate. It also has four small tabs that fit into slo...

GE Blower Tangential 45Mm - Part# WB26K10012 is a blower motor manufactured by General Electric. It is designed to be used in a variety of applications, including furnaces, air conditioners, and heat pumps. The motor is designed to provide reliable and efficient operation for years of service. It ...

GE Brace Anti Tip is a safety device designed to prevent stoves and ranges from tipping over. It is a metal bracket that attaches to the back of the range and to the wall behind it. The bracket helps keep the range in place, even if someone bumps into it or if there is an earthquake. The GE Brace ...

GE Bracket Anti Tip is a safety device designed to prevent stoves and ranges from tipping over. It is a metal bracket that attaches to the rear of the range or stove and then to the wall behind it. The bracket helps keep the appliance in place, even if someone bumps into it or if there is an earth...

The GE Bracket Latch (Part# WB02K10273) is a replacement part for General Electric ovens. It is used to secure the oven door in place and keep it from swinging open. The latch is made of metal and has two prongs that fit into the holes on the oven door. It also has a lever that can be used to rele...

GE CLIP TOE KICK Part# WB02K10225 is a plastic clip designed to secure the toe kick panel on GE dishwashers. The clip is made of durable plastic and features a spring-loaded design that allows for easy installation and removal. The clip is designed to fit all GE dishwashers with a toe kick panel, ...

The GE Glowbar Igniter Part# WB13X25264 is a replacement part for gas ovens and ranges. It is a metal tube with two electrodes at the end that produces an electric spark when heated. The spark ignites the gas in the oven, allowing it to heat up and cook food. The igniter is typically located near ...

GE Guide Oven Rack LH (Part# WB02K10395) is a replacement part for General Electric ovens. It is the left-hand side of the oven rack, and it helps to keep food in place while cooking. The rack is made of heavy-duty steel and has a black finish. It has a non-stick coating that makes it easy to clea...

GE Harness Serial Dual - Part# WB24K10063 is a wiring harness designed for use with General Electric (GE) ovens. It is used to connect the oven’s main power supply to the oven’s control board. The harness includes two wires, one for the main power supply and one for the control board. The harness ...

The GE Igniter Glowbar (Part# WB13K10030) is a replacement part for gas ovens and ranges. It is a metal bar with a ceramic end that glows red when heated by an electric current. The glowbar ignites the gas in the oven, allowing it to heat up and cook food. The glowbar is connected to the oven's el...

GE Kit Leg - Part# WB49X24032 is a replacement part for a range or oven. It is a metal leg that is used to support the range or oven and keep it level. The kit includes four legs, four screws, and four washers. The legs are adjustable so that the range or oven can be leveled on uneven surfaces. Th...

GE KNOB ASM - Part# WB03K10359 is a replacement part for General Electric (GE) range/ovens. It is a knob assembly that includes the knob, shaft, and mounting hardware. The knob is used to control the temperature of the oven. It has a black finish and features a white indicator line that shows the ...

GE KNOB ASM OVEN TMST - Part# WB03K10259 is a replacement part for General Electric ovens. It is a knob assembly that is used to control the temperature settings on the oven. The knob assembly includes a metal shaft, plastic knob, and a black plastic insert. The insert has three settings: Off, Bak...

GE LAMP HALOGEN 20W - Part# WB25T10064 is a halogen light bulb manufactured by General Electric. It is a 20 watt bulb with a G4 base and an average life of 2,000 hours. The bulb has a clear finish and produces a bright white light. It is suitable for use in accent lighting, track lighting, display...

GE LATCH OVN - Part# WB02K10206 is a replacement oven door latch assembly for General Electric ovens. It is designed to replace the existing latch on the oven door and is made of durable plastic. The latch includes two parts: a hook and a catch. The hook attaches to the oven door frame and the cat...

GE LENS BEZEL - Part# WB02K10216 is a replacement part for a range of GE ovens. It is a black plastic bezel that fits around the lens of the oven light. The bezel helps to protect the lens from dirt and debris, as well as providing an aesthetically pleasing look to the oven. The part number WB02K1...

GE Plate Convection is a part number WB02T10310 and is a replacement part for a GE range. It is a convection plate that helps to evenly distribute heat throughout the oven cavity. The plate is made of stainless steel and has a non-stick coating for easy cleaning. It also has a raised lip to help k...

The GE Reed Switch PCB - Part# WB27K10367 is a printed circuit board (PCB) that contains a reed switch. A reed switch is an electrical switch operated by an applied magnetic field. It consists of a pair of contacts on ferromagnetic metal reeds in a hermetically sealed glass envelope. When the magn...

GE Relay Board ASM - Part# WB19K10063 is a replacement part for a range of GE ovens. It is an electronic control board that is responsible for controlling the oven’s functions, such as temperature, timer, and bake/broil settings. The relay board also helps to regulate the power supply to the oven’...

GE Rod Extension - Part# WB02K10392 is a replacement part for GE ovens. It is a metal rod that extends from the back of the oven to the front, allowing for easier access to the oven cavity. The rod is adjustable in length and can be used to extend the reach of an oven rack or shelf. It is made of ...

GE SCR 8-18 AB HW 1/2 S - Part# WB01T10115 is a replacement part for a GE range. It is a surface burner switch, which controls the heat of the surface burner on the range. The switch has 8 positions, ranging from off to high heat. It also has an adjustable knob that allows you to set the desired t...

GE SCR 8-18 AB X 5/16S - Part# WB01X26995 is a stainless steel screw used in various GE appliances. It is an 8-18 AB x 5/16 inch stainless steel screw with a part number of WB01X26995. This screw is used to secure the control panel to the frame of the appliance. It is made from stainless steel for...

GE SCREW 10-32 TRP 1/2 - Part# WB01K10100 is a 10-32 thread size, 1/2 inch long, truss head screw manufactured by General Electric. It is made of steel and has a zinc plated finish. The truss head design provides a low profile and wide bearing surface for increased strength and stability. This scr...

GE Sensor ASM - Part# WB21T10019 is a replacement part for a range or oven. It is a temperature sensor assembly that helps to regulate the temperature of the oven. The sensor monitors the air temperature inside the oven and sends a signal to the electronic control board to adjust the heating eleme...

GE Tube and Nut Asm - Part# WB28K10497 is a part used in many GE ovens. It is a tube and nut assembly that connects the oven’s gas supply line to the gas valve. The tube is made of metal and has a nut on one end that screws into the gas valve. The other end of the tube has a fitting that connects ...

HINGE DOOR LT(30) - Part# WB10K10020 is a left-handed door hinge designed for use with 30-inch wide doors. It is made of steel and has a black finish. The hinge has two knuckles that are connected by a pin, allowing the door to swing open and closed. The pin is adjustable, allowing the user to adj...

HINGE DOOR RT(30) - Part# WB10K10019 is a replacement part for a 30-inch right-hand door hinge. It is designed to fit a variety of GE, Hotpoint, and Kenmore ovens and ranges. The part is made of metal and features two mounting holes for easy installation. It includes two screws for attaching the h...

Range convex meter mounting, part# WB02T10293, is a mounting bracket designed to securely hold a range convex meter in place. The bracket is made of durable steel and features a black powder-coated finish for added protection against corrosion. It has two mounting holes that are spaced apart to fi...

Range end cap extension, Part# WB02K10219, is a part used in the installation of a range. It is used to extend the end cap of the range to fit a wall oven or other appliance. The part is made of stainless steel and includes two screws for installation. It is designed to fit most ranges and wall ov...

Range glass bracket, Part# WB02K10218, is a part used in the installation of a range or oven. It is used to secure the glass top of the range or oven to the frame. The bracket is made of metal and has two holes for mounting screws. It also has two slots for the glass top to fit into. This part is ...

The Range Oven Bezel, Part# WB03K10307, is a replacement part for a range oven. It is a plastic bezel that goes around the front of the oven and is used to cover up any gaps between the oven and the countertop. The bezel also helps to protect the oven from spills and other debris. It is designed t...