Model: ZDP48L4GH1SS

The GE Bracket Burner Hanger (Part# WB02X11077) is a replacement part for GE gas ranges. It is used to secure the burner bracket to the range top. The hanger is made of metal and has two holes for mounting screws. It also has a notch in the center that fits over the burner bracket. This part is us...

The GE Burner Cap (Porcelain) - Part# WB13X10014 is a replacement part for a gas range. It is designed to fit onto the burner head of a gas range and helps to evenly distribute the heat from the burner. The porcelain material helps to protect the burner from corrosion and wear. The cap also helps ...

GE CLIP Part# WB02X11087 is a part used in many GE appliances. It is a plastic clip that is used to secure the door gasket to the door frame of the appliance. The clip helps to ensure a tight seal between the door and the appliance, preventing air from escaping and keeping food fresh. The clip is ...

GE CLIP TINNERMAN Part# WB01X10017 is a fastener clip used to secure wires and cables in place. It is made of steel and has a zinc-plated finish for corrosion resistance. The clip has two prongs that fit into the hole of the Tinnerman nut, which is then tightened with a screwdriver. The clip can b...

GE Door Gasket 27" - Part# WB02X11072 is a replacement part for a GE refrigerator. It is a rubber gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is 27 inches long and has an adhesive backing for easy installation. It is designed to fit most GE refri...

GE FASTENER KIT 12/24/27 - Part# WB01X10259 is a fastener kit designed for use with select GE appliances. The kit includes 12, 24, and 27 screws, as well as a screwdriver and instructions. The screws are used to secure the appliance to the wall or cabinet. The kit is designed for use with select G...

GE GRATE SUPPORT Part# WB02X11074 is a replacement part for GE gas ranges. It is used to support the grates on the cooktop of the range. The part is made of metal and is designed to fit specific models of GE gas ranges. It measures approximately 4 inches by 4 inches and has two mounting holes for ...

GE High Altitude Conversion Part# WB49X10130 is a conversion kit designed to allow GE gas ranges to operate safely and efficiently at altitudes above 5,000 feet. The kit includes a new burner orifice, a new oven igniter, and instructions for installation. The burner orifice is designed to reduce t...

GE Insert Burner - Part# WB02X11090 is a replacement part for GE gas ranges. It is a burner insert that fits into the range top and is used to provide heat for cooking. The burner insert has a porcelain-enameled steel construction and is designed to fit into the range top opening. It has an adjust...

GE Nipple Part# WB02X10456 is a part used in many GE appliances. It is a short metal tube with threads on both ends. It is used to connect two pipes or hoses together, and it can also be used to connect an appliance to a water supply line. The nipple has a 1/2 inch diameter and is made of brass fo...

GE NUT CHAMFERED - Part# WB01X10321 is a chamfered nut made by General Electric. It is used to secure the terminal block to the back of the range. The nut is made of steel and has a zinc-plated finish for corrosion resistance. It has a 1/4-20 thread size and measures 0.62" in diameter and 0.37" in...

) GE NUT HEX 10-24 KEPS SS (10 PA - Part# WB01X10057) is a stainless steel hex nut made by General Electric. It is designed for use with 10-24 screws and has a Keps (K-Lock) style head. The Keps style head has a star-shaped pattern on the top of the nut, which helps to keep the nut from loosening d...

The GE NUT JET HOLDER SIM Part# WB01X10140 is a replacement part for GE dishwashers. It is a small plastic holder that holds the nut jet in place on the dishwasher spray arm. The nut jet is a small plastic piece that fits into the holder and helps to direct the water spray from the dishwasher. Thi...

GE SCREW 8-32 X 1 TORX FL HD - Part# WB01X10035 is a type of screw manufactured by General Electric (GE). It is an 8-32 x 1 inch Torx flat head screw with a part number of WB01X10035. The Torx drive system is designed to provide greater torque transfer and improved resistance to cam-out, which can...

GE Tubing Main Front - Part# WB28X10065 is a replacement part for GE ovens. It is a metal tube that runs along the front of the oven and connects to the gas valve. This part helps to ensure that the gas is properly distributed throughout the oven for even cooking. The tubing main front also helps ...

GE Venturi & Nut Chambered Part# WB38X10080 is a replacement part for GE range hoods. It is a venturi and nut assembly that is used to attach the venturi to the range hood. The venturi is a device that creates a vacuum in the range hood, which helps to draw air out of the kitchen. The nut chambere...

The GE Venturi Bolt (Part# WB01X10056) is a part used in many GE and Hotpoint dishwashers. It is a plastic bolt that is used to secure the venturi tube to the bottom of the dishwasher tub. The venturi tube is responsible for providing air to the wash cycle, which helps to create a powerful cleanin...

A monogram badge - small with - Part# WB02X11061 is a decorative metal badge that is used to identify a specific product or brand. It typically features a logo or design that is unique to the product or brand, and it is usually placed on the front of the product. The badge can be made from various...