Model: ZDP486NRP1SS

The GE Base Burner 18K-Simmer Part# WB16T10047 is a replacement part for a range or cooktop. It is designed to provide a low, even heat for simmering and melting delicate foods. The burner has an 18,000 BTU output and features a cast iron grate with an enamel finish. The burner also has a built-in...

GE Bezel Knob - Part# WB07K10299 is a replacement part for General Electric (GE) ovens. It is a black plastic knob with a chrome-colored bezel that fits onto the front of the oven control panel. The knob is used to adjust the temperature and other settings on the oven. It has a metal shaft that in...

The GE Blower Tangential 45mm (Part# WB26K10010) is a replacement blower motor for many GE brand ovens and ranges. It is designed to replace the original blower motor in the appliance, and it is made of durable plastic and metal components. The motor has a 45mm diameter, and it operates at 120 vol...

GE Brace Anti Tip is a safety device designed to prevent stoves and ranges from tipping over. It is a metal bracket that attaches to the back of the range and to the wall behind it. The bracket helps keep the range in place, even if someone bumps into it or if there is an earthquake. The GE Brace ...

GE Bracket Anti Tip is a safety device designed to prevent stoves and ranges from tipping over. It is a metal bracket that attaches to the rear of the range or stove and then to the wall behind it. The bracket helps keep the appliance in place, even if someone bumps into it or if there is an earth...

GE Cap Burner Part# WB13T10067 is a replacement part for GE gas ranges. It is a burner cap that fits over the burner head to help distribute heat evenly and protect the burner from spills. The cap is made of durable porcelain-coated steel and has a flat surface with four slots to allow air flow. I...

GE CLIP TOE KICK Part# WB02K10225 is a plastic clip designed to secure the toe kick panel on GE dishwashers. The clip is made of durable plastic and features a spring-loaded design that allows for easy installation and removal. The clip is designed to fit all GE dishwashers with a toe kick panel, ...

GE ELECTRODE TOP - Part# WB13T10065 is a replacement part for a range top burner. It is made of metal and is used to hold the electrode in place on the range top burner. The electrode is the part that produces the spark when the burner is turned on. This part helps to ensure that the spark is prod...

GE GASKET DOOR 27" - Part# WB02K10221 is a replacement part for a GE oven. It is a 27-inch gasket door that fits onto the oven door to provide an airtight seal. The gasket is made of durable rubber and helps to keep heat in the oven and prevent it from escaping. This part is compatible with many G...

The GE Gasket Frame Front - Part# WB02K10195 is a replacement part for GE ovens. It is a black plastic frame that seals the front of the oven cavity to prevent heat and smoke from escaping. The frame also helps to keep the oven door closed and secure. The frame measures approximately 20 inches wid...

GE Guide Oven Rack Part# WB02K10196 is a replacement oven rack for GE ovens. It is designed to fit in the oven cavity and provide a stable platform for baking and roasting. The rack is made of heavy-duty steel and has a black finish. It features two adjustable positions, allowing you to customize ...

The GE Igniter Glowbar (Part# WB13K10030) is a replacement part for gas ovens and ranges. It is a metal bar with a ceramic end that glows red when heated by an electric current. The glowbar ignites the gas in the oven, allowing it to heat up and cook food. The glowbar is connected to the oven's el...

GE KNOB ASM OVEN TMST - Part# WB03K10259 is a replacement part for General Electric ovens. It is a knob assembly that is used to control the temperature settings on the oven. The knob assembly includes a metal shaft, plastic knob, and a black plastic insert. The insert has three settings: Off, Bak...

GE KNOB ASM TMST - Part# WB03K10257 is a replacement part for General Electric (GE) range/ovens. It is a knob assembly that includes the knob, the shaft, and the mounting hardware. The knob is used to control the temperature settings on the oven. The shaft connects to the temperature control switc...

GE LAMP HALOGEN 20W - Part# WB25T10064 is a halogen light bulb manufactured by General Electric. It is a 20 watt bulb with a G4 base and an average life of 2,000 hours. The bulb has a clear finish and produces a bright white light. It is suitable for use in accent lighting, track lighting, display...

GE Lamp Halogen ASM - Part# WB08K10011 is a replacement part for GE brand range hoods. It is a halogen lamp assembly that includes the bulb, socket, and mounting bracket. The halogen lamp provides bright, white light to illuminate the cooking surface below the range hood. This part is designed to ...

GE LATCH OVN - Part# WB02K10206 is a replacement oven door latch assembly for General Electric ovens. It is designed to replace the existing latch on the oven door and is made of durable plastic. The latch includes two parts: a hook and a catch. The hook attaches to the oven door frame and the cat...

GE LEG ASM - Part# WB02K10193 is a part used in GE ovens. It is the lower oven leg assembly, which includes the lower oven leg, the mounting bracket, and the mounting screws. The lower oven leg assembly helps to support the oven and keep it level on uneven surfaces. It also helps to reduce vibrati...

The GE LP Conversion Kit - Part# WB28K10538 is a kit designed to convert a gas range from natural gas to liquid propane (LP). The kit includes all the necessary components to make the conversion, including an LP orifice, a regulator, and an LP hose. The kit also includes instructions for making th...

GE Lubricant Cleaner Part# WB02T10303 is a special cleaner designed to remove dirt, grease, and other contaminants from the moving parts of appliances. It is formulated to penetrate deep into the parts and dissolve the dirt and grease. The cleaner is safe for use on all types of appliances, includ...

GE Module Spark - Part# WB13K10031 is a replacement part for GE gas ranges. It is a spark module that helps to ignite the gas burners on the range. The spark module is responsible for sending an electrical current to the igniter, which then creates a spark that lights the gas burner. This part is ...

The GE Orifice Spud (Ng Simmer) Part# WB28T10159 is a replacement part for gas ranges. It is used to regulate the flow of gas from the burner to the flame. The orifice spud is a small metal tube with a hole in the center that controls the amount of gas that passes through it. The size of the hole ...

GE Orifice Spud LP Main (Part# WB28T10117) is a replacement part for gas ranges. It is used to regulate the flow of gas from the main gas line to the burner. The orifice spud LP main is a brass fitting that has an adjustable needle valve, which can be used to adjust the flow of gas to the burner. ...

GE Orifice Spud LP Main (Part# WB28T10118) is a replacement part for a gas range. It is used to regulate the flow of gas from the main gas line to the burner. The orifice spud LP main is designed to fit into the opening of the burner and has a threaded connection that allows it to be securely atta...

GE Plate Convection is a part number WB02T10310 and is a replacement part for a GE range. It is a convection plate that helps to evenly distribute heat throughout the oven cavity. The plate is made of stainless steel and has a non-stick coating for easy cleaning. It also has a raised lip to help k...

GE Relay Board ASM RT Part# WB19K10061 is a replacement part for General Electric ovens. It is a relay board assembly that controls the oven's heating elements and other functions. The board contains relays, fuses, and other components that control the oven's operation. This part is used to replac...

GE SCR 8 HD 1/4 - 20 - Part# WB01K10067 is a self-tapping screw manufactured by General Electric. It is made of steel and has a black oxide finish. The screw has a 1/4 inch diameter and is 20 threads per inch. It is designed for use in applications where the screw needs to be tapped into a pre-dri...

GE SCR 8-18 AB FLT15 3/8 SS - Part# WB01K10087 is a stainless steel screw manufactured by General Electric. It is an 8-18 AB FLT15 3/8 inch screw with a part number of WB01K10087. This screw is used in a variety of applications, including electrical, plumbing, and construction. The 8-18 AB FLT15 3...

GE SCREW 8-18 AB TRPO 3/8 SS - Part# WB01K10086 is a stainless steel screw manufactured by General Electric. It is an 8-18 AB thread size, with a 3/8 inch length and a TRPO (triple-start) thread pattern. The part number for this screw is WB01K10086. This screw is designed for use in a variety of a...

GE SCREW 832 1/8 - Part# WB01K10029 is a part manufactured by General Electric (GE). It is an 8-32 x 1/8 inch screw used for securing various components in appliances. The screw is made of steel and has a zinc plated finish for corrosion resistance. It has a pan head style with a Phillips drive ty...

GE SCREW 8-32 MCH PNT15 - Part# WB01T10104 is a type of screw manufactured by General Electric. It is an 8-32 machine screw with a 15 degree point and a zinc plated finish. The 8-32 size indicates that the screw has an 8 thread per inch (TPI) pitch and a diameter of 0.164 inches. The 15 degree poi...

GE SCREW SIMMER MAIN HD - Part# WB01T10092 is a replacement part for General Electric (GE) gas ranges. It is the main simmer control valve, which is used to regulate the flow of gas to the burners. The part includes a mounting bracket and screws, and it is designed to fit specific GE models. This ...

The GE Spring Igniter (Part# WB09T10011) is a replacement part for gas ovens and ranges. It is a flat, metal igniter with a spring-loaded design that is used to ignite the gas in the oven or range. The igniter works by drawing electrical current through the oven safety valve to open it and allow g...

GE Street Elbow Part# WB02K10226 is a street elbow fitting used to connect two pipes at an angle. It is made of galvanized steel and has a female National Pipe Thread (NPT) connection on one end and a male NPT connection on the other. This street elbow is designed to be used with copper, brass, al...

GE SWITCH SAIL ASM - Part# WB21K10130 is a replacement part for GE ovens. It is a sail switch assembly that is used to detect the presence of a flame in the oven. The sail switch assembly consists of a metal sail, a plastic housing, and two electrical contacts. The metal sail is connected to the p...

GE Toe Kick Top - Part# WB07K10306 is a replacement part for GE dishwashers. It is a black plastic top panel that fits on the bottom of the dishwasher and covers the toe kick area. The part is designed to protect the toe kick area from dirt and debris, while also providing a finished look to the d...

GE Transformer Part# WB27K10298 is a replacement transformer for GE ovens. It is a 120V, 50/60 Hz, 25VA transformer that is used to provide power to the oven's electronic control board. The transformer is designed to be mounted on the back of the oven and connected to the control board via two wir...

GE Tube and Nut Asm - Part# WB28K10497 is a part used in many GE ovens. It is a tube and nut assembly that connects the oven’s gas supply line to the gas valve. The tube is made of metal and has a nut on one end that screws into the gas valve. The other end of the tube has a fitting that connects ...

GE Valve Shut Off Part# WB19K10038 is a gas valve shut off designed to be used with select GE gas ranges. It is a safety device that prevents the flow of gas when the range is not in use. The valve has two positions: open and closed. When in the open position, gas can flow freely through the valve...

The GE Washer Igniter Part# WB02T10323 is a replacement part for General Electric washing machines. It is an igniter that helps to ignite the gas in the washer's burner assembly. The igniter works by heating up to a high temperature, which causes the gas to ignite and create heat for the washer. T...

HINGE DOOR LT(48) - Part# WB10K10016 is a left-handed door hinge designed for use with 48-inch wide doors. It is made of steel and has a black finish. The hinge has a 1/4 inch radius corner and is designed to fit standard door frames. It comes with two mounting screws and can be used on both inter...

HINGE DOOR RT(48) - Part# WB10K10015 is a right-hand door hinge designed for use with GE Profile and GE Café French Door Refrigerators. This part is made of durable metal and features a 48-inch length. It is designed to be used with the top hinge of the refrigerator door, and it helps to ensure th...

The Range Control Panel Bracket - Part# WB02K10211 is a replacement part for a range. It is used to secure the control panel to the range. The bracket is made of metal and has two mounting holes for attaching it to the range. It also has two slots for securing the control panel in place. This part...

Range convex meter mounting, part# WB02T10293, is a mounting bracket designed to securely hold a range convex meter in place. The bracket is made of durable steel and features a black powder-coated finish for added protection against corrosion. It has two mounting holes that are spaced apart to fi...

Range Door Gasket Part# WB02K10220 is a replacement part for many GE and Hotpoint ovens. It is a rubber gasket that fits around the oven door to provide a tight seal when the door is closed. This helps to keep heat and moisture inside the oven, ensuring that food cooks evenly and quickly. The gask...

Range end cap extension, Part# WB02K10219, is a part used in the installation of a range. It is used to extend the end cap of the range to fit a wall oven or other appliance. The part is made of stainless steel and includes two screws for installation. It is designed to fit most ranges and wall ov...

Range glass bracket, Part# WB02K10218, is a part used in the installation of a range or oven. It is used to secure the glass top of the range or oven to the frame. The bracket is made of metal and has two holes for mounting screws. It also has two slots for the glass top to fit into. This part is ...

Range Injection Bracket - Part# WB02K10192 is a part used in the installation of a range or oven. It is designed to provide support for the range or oven, and to help ensure that it is properly secured in place. The bracket is made of metal and has two mounting holes on either side. It also has tw...

The Range Oven Bezel, Part# WB03K10255, is a part used in many ovens to cover the edges of the oven door. It is made of durable plastic and is designed to fit around the edges of the oven door. The bezel helps to protect the door from scratches and other damage. It also helps to keep food particle...

Range oven nipple, Part# WB02K10227, is a part used in gas ranges and ovens. It is a short length of metal pipe with two threaded ends. The threads on one end are used to connect the nipple to the gas valve, while the other end is used to connect the range or oven to the gas supply line. The nippl...