Model: XUD27ESSM0WW

GE 1/4-20 Taptite Hwh - Part# WH01X10612 is a self-tapping screw manufactured by General Electric. It is made of steel and has a black oxide finish. The screw has a 1/4-inch diameter and 20 threads per inch (TPI). It is designed to be used in applications where the screw needs to be tapped into th...

The GE Actuator Lid (Part# WH43X10057) is a replacement part for GE washing machines. It is a plastic lid that covers the actuator, which is the part of the washing machine that controls the water level and other settings. The lid helps to keep dirt and debris out of the actuator, ensuring that it...

GE Baffle - Part# WE21M39 is a replacement part for GE ovens. It is a metal baffle that helps to evenly distribute heat throughout the oven cavity. The baffle is designed to fit in the back of the oven and has two slots for mounting screws. The baffle helps to reduce hot spots and ensures that foo...

GE Belt Drive Part# WE12X27300 is a replacement part for GE washers. It is a drive belt that connects the motor to the transmission. The belt is made of rubber and has a length of 27 inches and a width of 1/2 inch. It is designed to provide reliable power transfer from the motor to the transmissio...

The GE Board & Support Assembly - Part# WH16X27251 is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications. It is used in some GE washing machines to provide support for the control board and other components. The assembly includes the board, mountin...

GE Capacitor Part# WH12X27299 is a replacement part for many GE washing machines. It is a dual-run capacitor, which means it has two capacitors in one unit. The first capacitor helps start the motor, while the second capacitor helps keep it running. This part is designed to replace worn out or dam...

GE Clip Front Panel - Part# WE2M301 is a replacement part for a GE dryer. It is the front panel of the dryer that houses the control knobs and buttons. The panel is made of durable plastic and features a clip-on design for easy installation. It includes two mounting screws and is compatible with s...

GE Clip Locking Part# WH01X10595 is a plastic clip used to secure the lid of a washing machine. It is designed to fit GE washing machines and is used to keep the lid closed during operation. The clip is made of durable plastic and features a spring-loaded design that allows it to easily snap into ...

GE Clutch Part# WH05X27185 is a genuine OEM replacement part for General Electric washing machines. It is a direct drive clutch assembly that helps to spin the inner tub of the washer during the spin cycle. The clutch assembly includes a drive pulley, a brake cam, and a drive belt. The clutch help...

GE Cover Fuse Terminal - Part# WE1M1009 is a replacement part for a fuse box. It is designed to cover the fuse box and protect it from dust, dirt, and other debris. The cover is made of durable plastic and has a snap-on design for easy installation. It also features an easy-to-read label that indi...

GE Door Handle Part# WE1M1068 is a replacement door handle for GE dryers. It is made of plastic and is white in color. The handle measures 4-3/4 inches long and 1-1/2 inches wide. It has two mounting holes that are spaced 2-3/4 inches apart. This handle is used to open and close the dryer door. It...

GE DRUM ASM 27" - Part# WE21M41 is a General Electric dryer drum assembly. It is a replacement part for many GE dryers and is designed to replace the original drum assembly in the dryer. The drum assembly includes the drum, felt seal, bearing kit, and belt. The drum is made of steel and has a diam...

GE Filter Lint (Part# WE18X25102) is a replacement lint filter for GE dryers. It is designed to capture lint, dust, and other debris from the air that passes through the dryer during the drying cycle. The filter is made of a durable plastic material and has a mesh screen that traps lint and other ...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Clothes Washer Washing Machine LID LOCK - Part# WH44X10288 is a replacement part for washing machines. It is designed to lock the lid of the washing machine in place, preventing it from opening during the wash cycle. The lid lock is made of dur...

GE Harness Lid Lock - Part# WH19X27244 is a replacement part for GE washing machines. It is a lid lock assembly that helps to keep the lid of the washing machine closed during operation. The part includes the lid lock, harness, and mounting screws. The part is made of plastic and metal materials a...

The GE Harness Main Washer Jst 27 - Part# WH19X27242 is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications. This washer is used to secure the main harness to the back of the washer cabinet. It is made of durable plastic and has a diameter of 27mm. ...

GE Harness Pump and Hose Pressure Washer Part# WH19X27246 is a replacement part for GE pressure washers. This part includes the pump, hose, and harness assembly. The pump is designed to provide a steady stream of water at high pressure for cleaning surfaces. The hose is made of durable material an...

GE Heater and Housing Assembly (Part# WE11M62) is a replacement part for many GE dryers. It is a combination of the heating element, the housing, and the thermostat. The heating element is responsible for providing heat to the dryer drum. The housing encloses the heating element and helps to prote...

GE Hex Pt Screw K80 X 3.59 - Part# WH01X10616 is a hex head screw manufactured by General Electric (GE). It is made of steel and has a Phillips drive type. The K80 designation indicates that the screw has an 80 degree countersink angle, which is used to create a flush fit when the screw is driven ...

The GE Hinge Washer Cover Lh - Part# WH44X10290 is a replacement part for GE washers. It is the left-hand side cover for the hinge on the washer door. This part is made of durable plastic and helps to keep dirt and debris out of the hinge area. It also helps to keep the door from swinging open too...

GE Hose Drain Assembly (Part# WH41X10281) is a replacement part for GE washing machines. It is a hose assembly that connects the drain pump to the drain hose. The assembly includes a plastic elbow, a rubber gasket, and two clamps. The elbow fits into the drain pump and the gasket seals it against ...

GE Hose Drain Inlet - Part# WH41X10280 is a replacement part for GE washing machines. It is a plastic hose drain inlet that connects the drain hose to the back of the washer. The inlet has two ports, one for the drain hose and one for the water supply line. The inlet also has a check valve to prev...

The GE Kit Agitator 27 & Bolt - Part# WH49X27325 is a replacement part for General Electric washing machines. It is a complete agitator assembly, including the agitator, the agitator cam, and the bolt that holds it all together. The agitator is responsible for moving the clothes around in the wash...

The GE KIT MOTOR DRIVE AND PULLEY 2 - Part# WE49X27320 is a replacement part for a variety of GE washing machines. This kit includes a motor drive and pulley assembly, which is used to power the agitator in the washing machine. The motor drive and pulley assembly consists of a motor, pulley, belt,...

The GE KIT TRANSMISSION PLATFORM AS - Part# WH49X27322 is a transmission platform assembly for GE washing machines. It is designed to provide a stable and reliable connection between the motor and the transmission, allowing the machine to operate efficiently. The kit includes a drive belt, pulley,...

The GE KIT TRANSMISSION PULLEY NUT - Part# WH49X27323 is a replacement part for a variety of General Electric washing machines. This nut is used to secure the transmission pulley to the drive shaft. It is made of metal and has a hexagonal shape with an internal threading. The nut measures approxim...

The GE KIT WASHER MOTOR AND PULLEY - Part# WH49X27319 is a replacement part for GE washing machines. It includes a motor and pulley assembly that helps to drive the agitator in the washer. The motor is a 1/2 HP, 120V, 60 Hz, single-phase induction motor with a reversible rotation. The pulley is ma...

The GE LEFT SAFETY THERMOSTAT 24" Part# WE4M528 is a thermostat designed to provide safety and energy efficiency in residential and commercial settings. This thermostat is designed to be installed on the left side of the wall, and it features a 24-inch dial that allows for precise temperature cont...

GE Leg Leveling Part# WH01X10594 is a part used to level the legs of a washing machine. It is made of plastic and consists of two parts: a base and a screw. The base has four slots that fit into the four legs of the washing machine, while the screw can be adjusted to raise or lower the height of e...

GE LEG REAR LEVELING - Part# WE01X25234 is a part used in some GE washing machines. It is a rear leveling leg that helps to level the washing machine and keep it stable during operation. The part consists of a metal bracket with two adjustable legs that can be adjusted to the desired height. The l...

GE MAGNET - Part# WH01X10626 is a replacement part for General Electric washing machines. It is a magnet that helps to keep the lid of the washing machine closed during operation. The magnet is made of strong neodymium material and is designed to last for many years. It is an important part of the...

GE Mode Shifter ASM - Part# WH18X27186 is a part used in General Electric washing machines. It is a part of the transmission assembly and is responsible for shifting the machine between different wash cycles. The mode shifter assembly includes a plastic gear, a spring, and a metal arm. The plastic...

The GE Motor Pulley & Nut Kit - Part# WH49X27554 is a replacement part for a variety of GE washing machines. It includes a motor pulley, two nuts, and a washer. The motor pulley is used to drive the belt that turns the agitator in the washing machine. The two nuts are used to secure the pulley to ...

GE Nut Speed - Part# WE02X20269 is a replacement part for GE dryers. It is a metal nut that is used to secure the drum belt to the motor pulley. The nut is made of metal and has a 5/16-inch thread size. It is designed to fit specific models of GE dryers, including Hotpoint, RCA, and GE Profile mod...

GE Pin Alignment - Part# WH01X10596 is a part used in General Electric (GE) washing machines. It is a pin alignment part that helps to align the drum and the drive shaft of the washing machine. The pin alignment part is made of metal and has two pins that fit into corresponding holes in the drive ...

The GE Press Hose Clamp (Part# WH16X10152) is a stainless steel clamp designed to secure hoses and other flexible tubing to fittings. It is used in a variety of applications, including refrigerators, dishwashers, washing machines, and other household appliances. The clamp features a unique press-f...

GE Pump Drain Part# WH23X10040 is a replacement part for GE washing machines. It is a pump drain that helps to remove water from the washer during the draining cycle. The pump drain is made of durable plastic and features a 1/4 inch outlet hose connection. It also includes an inlet filter to help ...

GE ROD ASSEMBLY 27" - Part# WH16X27179 is a replacement part for GE washing machines. It is a rod assembly that measures 27 inches in length and is used to support the agitator in the washer. The rod assembly connects to the agitator and helps keep it in place during the wash cycle. This part is m...

GE ROD ASSEMBLY 27" - Part# WH16X27180 is a part manufactured by General Electric (GE) for use in their washing machines. It is a rod assembly that is 27 inches long and has a part number of WH16X27180. This rod assembly is used to connect the agitator to the transmission in the washing machine. I...

GE Scr 8-16 B Flp .525 S Zn - Part# WH01X10631 is a part manufactured by General Electric (GE). It is a self-tapping screw with an 8-16 thread size, a flat head, and a .525 inch shank length. The material is zinc plated steel, which provides corrosion resistance and durability. This part is used t...

GE SCREW - Part# WE2M302 is a type of screw manufactured by General Electric. It is a self-tapping, self-drilling screw designed for use in metal and wood applications. The screw has a #2 Phillips head and is made from steel with a zinc plating for corrosion resistance. The threads are coarse and ...

GE SELECTOR ASM (3S) - Part# WH18X27241 is a part used in washing machines manufactured by General Electric. It is a selector assembly that includes three switches, which are used to control the washing machine's cycle settings. The switches are labeled with the settings for each cycle, such as de...

The GE Speed Sensor, Part# WH12X27187, is a replacement part for GE washing machines. It is a part of the motor control system and is responsible for monitoring the speed of the motor. The speed sensor works by detecting changes in the rotational speed of the motor and sending a signal to the cont...

GE Spring Shifter - Part# WH01X10606 is a replacement part for GE washing machines. It is a small plastic part that helps to shift the drive pulley on the transmission shaft. The spring shifter helps to move the drive pulley back and forth, allowing the transmission to engage and disengage from th...

The GE Start Button Assembly - Part# WE04X27654 is a replacement part for General Electric (GE) dryers. It is a two-piece assembly that includes the start button and the actuator. The start button is used to initiate the dryer cycle, while the actuator is used to engage the drive motor when the st...

GE Timer Part# WE04X22654 is a timer control board for a range of GE dryers. It is used to control the start and stop times of the dryer cycle. The timer is located in the back of the dryer and is connected to the main control board. It has two main functions: controlling the start and stop times ...

GE Trap Duct Asm - Part# WE14X27471 is a part used in some GE washing machines. It is a plastic assembly that connects the drain hose to the pump. It includes a drain trap, which helps to prevent clogs and blockages in the drain line. The assembly also includes a mounting bracket and screws for in...

The GE Upper Ball Joint - Part# WH16X27178 is a replacement part for a washing machine. It is used to connect the agitator to the transmission in the washer. The ball joint is made of metal and plastic and is designed to provide a secure connection between the two components. It is an OEM (Origina...

GE VALVE 2-1 - Part# WH13X27314 is a two-way water valve manufactured by General Electric. It is used in washing machines to control the flow of water into the machine. The valve has two ports, one for hot water and one for cold water. It is designed to open and close depending on the temperature ...

The GE Water Inlet Assembly - Part# WH13X27418 is a replacement part for General Electric washing machines. It is a complete assembly that includes the water inlet valve, the water inlet hose, and the mounting bracket. The water inlet valve controls the flow of cold and hot water into the washing ...

HINGE - Part# WE1M1033 is a replacement part for a dryer door. It is made of metal and is designed to attach the dryer door to the dryer cabinet. The hinge has two parts, one part attaches to the door and the other part attaches to the cabinet. The hinge allows the door to open and close smoothly....

UI Board GE ASM - Part# WE04X27284 is a user interface board assembly for General Electric (GE) dryers. It is responsible for controlling the operation of the dryer, including the display, timer, and other functions. The UI board is connected to the main control board and receives signals from var...