Model: WW22K6800AW-A2-00

ASSY SENSOR PRESSURE - Part# DC96-01703G is a pressure sensor assembly manufactured by Samsung. It is used in Samsung washing machines to measure the water pressure in the machine. The pressure sensor is connected to the main control board and sends a signal when the water pressure reaches a certa...

BOLT-HEX - Part# DC60-40137A is a hexagonal bolt used in many applications. It is made of high-grade steel and has a black oxide finish for corrosion resistance. The bolt has a coarse thread pitch and is designed to be used with nuts and washers. It has a 6mm diameter and is 40mm long, making it s...

The Drain Pump, Part# DC31-00178A, is a part used in many Samsung washing machines. It is responsible for pumping out the water from the washing machine during the drain cycle. The pump is connected to the drain hose and helps to remove the water from the washer tub. The pump has an impeller that ...

Samsung BEARING-BALL - Part# 6601-000148 is a replacement part for Samsung washing machines. It is a ball bearing that helps to reduce friction and noise while the machine is running. The ball bearing is made of high-quality steel and is designed to last for many years. It helps to keep the machin...

Samsung Bush-Motor Part# DC61-01088A is a motor used in Samsung washing machines. It is a direct drive motor that connects directly to the drum of the washing machine, providing power to spin the drum and agitate the clothes. The motor is designed to be quiet and efficient, and it has a brushless ...

Samsung Cord-Power Part# DC96-00757A is a power cord designed for use with Samsung appliances. It is a three-pronged cord that connects the appliance to an electrical outlet. The cord is made of durable materials and is UL listed for safety. It has a maximum current rating of 10 amps and a voltage...

The Samsung Damper Shock-Module - Part# DC66-00343K is a part used in Samsung washing machines. It is a shock absorber that helps to reduce the vibration and noise caused by the spinning of the drum during the wash cycle. The damper shock module is made up of two parts: a rubber damper and a metal...

Samsung Door Diaphragm - Part# DC64-03198A is a replacement part for Samsung washing machines. It is a rubber gasket that seals the door of the washing machine, preventing water from leaking out. The diaphragm also helps to keep the door closed during operation. This part is made of durable rubber...

Samsung Drawer-Hose Part# DC67-00051F is a replacement part for Samsung washing machines. It is a flexible hose that connects the water inlet valve to the water supply line. This part helps to ensure that the water inlet valve is properly connected to the water supply line, allowing for proper wat...

Samsung Fastener-Bolt - Part# DC60-00104A is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications. It is a metal fastener used to secure the back panel of Samsung refrigerators. This part is made of metal and is approximately 1 inch in length. It has...

Samsung Hose-Drain is a part used in Samsung washing machines. It is a flexible hose that connects the drain pump to the drain pipe. This part helps to remove water from the washing machine during the draining cycle. The part number for this item is DC67-00244L and it is made of plastic. This part...

Samsung HOSE-HANGER Part# DC62-10278A is a replacement part for Samsung washing machines. It is a plastic hanger that attaches to the side of the washer and holds the drain hose in place. The hanger helps keep the hose from kinking or becoming tangled, which can cause water to back up into the was...

Samsung Hose-Pressure Part# DC97-14637H is a replacement part for Samsung washing machines. It is a hose that connects the water inlet valve to the pressure switch. This part helps regulate the water pressure in the washing machine, ensuring that it is at an optimal level for efficient and effecti...

Samsung HOSE-PUMP - Part# DC97-15532B is a replacement part for Samsung washing machines. It is a hose and pump assembly that helps to circulate water through the washing machine during the wash cycle. The hose and pump assembly consists of two hoses, one for the inlet and one for the outlet, as w...

Samsung PCB-Main - Part# DC92-01848A is a printed circuit board (PCB) assembly for Samsung washing machines. It is the main control board for the washing machine and is responsible for controlling all of the functions of the machine. It contains a number of components, including a microprocessor, ...

Samsung Pump-Drain - Part# DC97-15597B is a replacement part for Samsung washing machines. It is a pump and drain assembly that helps to move water out of the washing machine during the draining cycle. The pump and drain assembly includes the motor, impeller, and housing. The motor helps to power ...

The Samsung PartsIPS Kenmore Clothes Washer Washing Machine Hot Water Inlet Fill Valve - Part# DC62-30314K is a replacement part for washing machines. It is designed to control the flow of hot water into the washing machine. The valve is made of durable plastic and features a solenoid coil that op...

Samsung Switch-Door (Part# DC64-00828G) is a replacement part for Samsung washing machines. It is the door assembly that allows the user to open and close the washing machine. The part includes the door, hinges, latch, and seal. It is designed to fit select Samsung models including WA400PJHDWR/AA,...

A Samsung Thermistor - Part# DC32-00010C is a temperature sensing device that is used in many Samsung appliances. It is a small, disc-shaped component that contains a material that changes its electrical resistance when exposed to different temperatures. This change in resistance can be measured a...