Model: WA48J7700AW-A2-00

BOLT-PULSATOR DC60-40133A is a pulsator assembly used in washing machines. It is a device that helps to move the water and detergent around the washing machine drum during the wash cycle. The pulsator creates a rotating motion in the water, which helps to agitate the clothes and remove dirt and st...

CAP - Part# DC66-00777A is a capacitor, which is an electrical component used to store energy in an electric field. It consists of two metal plates separated by an insulating material called a dielectric. When a voltage is applied across the plates, the electric field created between them stores e...

The Clutch Assy - Part# DC97-15494E is a part used in many Samsung washing machines. It is a drive belt that connects the motor to the transmission, allowing the machine to spin and agitate. The clutch assembly consists of a pulley, a spring, and a clutch plate. The pulley is connected to the moto...

The Drain Pump, Part# DC31-00178A, is a part used in many Samsung washing machines. It is responsible for pumping out the water from the washing machine during the drain cycle. The pump is connected to the drain hose and helps to remove the water from the washer tub. The pump has an impeller that ...

A Hall sensor, also known as a Hall effect sensor, is an electronic device that measures the magnitude of a magnetic field. It is used in a variety of applications such as automotive, industrial, and consumer electronics. The Hall sensor Part# DC31-00098A is a three-terminal device that utilizes t...

HOSE-DRAWER Part# DC67-00051B is a replacement part for Samsung washing machines. It is a hose drawer that helps to keep the hoses organized and out of the way. The hose drawer is made of plastic and has two compartments for storing hoses. It also has a handle for easy access and removal. The HOSE...

LEG-ADJUST Part# DC61-01722B is a Samsung replacement part for a washing machine. It is used to adjust the height of the washer's legs, allowing it to be leveled on uneven surfaces. The part consists of four adjustable legs with plastic feet and a metal bracket that attaches to the bottom of the w...

LEG-RUBBER - Part# DC61-03191B is a replacement part for Samsung washing machines. It is a rubber leg that is used to support the washing machine and keep it level. The part number DC61-03191B is specific to Samsung washing machines and is used to replace worn or damaged legs. The rubber leg helps...

The Samsung DC61-03385A Pump Case is a replacement part for Samsung washing machines. It is designed to replace the original pump case that has become worn or damaged over time. The pump case is responsible for containing and protecting the internal components of the washing machine's pump, such a...

The Samsung Assy Damper DC97-05280S is a part used in many Samsung washing machines. It is a rubber-like material that is used to dampen the vibration of the drum during the spin cycle. The damper helps to reduce noise and vibration, making the washing machine quieter and more efficient. The dampe...

Samsung ASSY SENSOR - Part# DC93-00278B is a part used in Samsung washing machines. It is a pressure sensor assembly that monitors the water level in the washer. The pressure sensor assembly consists of a pressure switch, a rubber diaphragm, and an electrical connector. The pressure switch senses ...

Samsung ASSY VALVE WATER - Part# DC97-15459G is a replacement part for Samsung washing machines. It is a water inlet valve assembly that controls the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has a pressure switch that detect...

Samsung Bracket-Nut (Part# DC61-00201A) is a replacement part for Samsung washing machines. It is a metal bracket with a nut attached to it, and it is used to secure the outer tub of the washing machine to the frame. The bracket-nut helps keep the tub in place and prevents it from vibrating or mov...

Samsung Clamper-Hose Fix - Part# DC65-00038A is a replacement part for Samsung vacuum cleaners. It is a plastic clamp that attaches the hose to the vacuum cleaner. The clamp helps to keep the hose securely attached to the vacuum cleaner, preventing it from coming loose or becoming disconnected. Th...

Samsung Cord-Power Part# DC96-00757A is a power cord designed for use with Samsung appliances. It is a three-pronged cord that connects the appliance to an electrical outlet. The cord is made of durable materials and is UL listed for safety. It has a maximum current rating of 10 amps and a voltage...

Samsung DD BLDC MOTOR - Part# DC93-00236C is a brushless direct current (BLDC) motor manufactured by Samsung. It is a permanent magnet synchronous motor (PMSM) that is designed to provide high efficiency and low noise operation. The motor has a rated voltage of 120V and a rated power of 250W. It h...

The Samsung DRAIN PUMP ASSY - Part# DC97-16778A is a part used in Samsung washing machines. It is responsible for pumping out the water from the washing machine during the spin cycle. The pump is located at the bottom of the washer and is connected to a hose that runs to the drain. The pump helps ...

Samsung Fixe-Cover Part# DC61-03174A is a replacement part for Samsung washing machines. It is a plastic cover that fits over the top of the drum and helps to keep it in place. The cover helps to protect the drum from damage and also helps to reduce noise from the machine. It is made of durable pl...

Samsung HOSE-CIRCULATION - Part# DC97-17354A is a replacement part for Samsung washing machines. It is a hose that circulates water from the washer tub to the water inlet valve. This part helps to ensure that the water entering the washer is at the correct temperature and pressure for optimal clea...

Samsung MAGNET-R.S (Part# DC61-03184A) is a replacement part for Samsung washing machines. It is a motor rotor assembly that helps to spin the drum of the washing machine. The MAGNET-R.S is designed to be an exact replacement for the original part, and it includes a new motor rotor, stator, and be...

Samsung Motor-Bldc Rotor - Part# DC31-00125C is a brushless DC motor rotor designed for use in Samsung washing machines. It is a direct replacement part for the original rotor and is made from high quality materials to ensure long lasting performance. The rotor features a double sided design with ...

Samsung Motor-Bldc Stator - Part# DC31-00097B is a part of the motor used in Samsung washing machines. It is a stator, which is the stationary part of the motor that houses the coils and magnets. The stator helps to generate the magnetic field necessary for the motor to rotate. This particular par...

Samsung MOTOR-DRAIN CLUTCH - Part# DC31-00090B is a replacement part for Samsung washing machines. It is a clutch assembly that helps to control the spin speed of the washing machine. The clutch is responsible for engaging and disengaging the motor from the drum, allowing it to spin at different s...

Samsung Nut-Hexagon Part# 6021-001588 is a nut designed for use with Samsung appliances. It is made of stainless steel and has a hexagonal shape. The nut has a diameter of 8mm and is used to secure the mounting bracket to the appliance. It is used in a variety of Samsung appliances, including refr...

Samsung PCB-Display Part# DC92-01624L is a Printed Circuit Board (PCB) display for Samsung refrigerators. It is used to control the temperature, humidity, and other settings of the refrigerator. The PCB display contains a number of components including a processor, memory, display driver, and othe...

Samsung PCB-MAIN - Part# DC92-01021V is a main printed circuit board (PCB) for Samsung washing machines. It is responsible for controlling the various functions of the washing machine, such as the water level, spin speed, and temperature. The PCB-MAIN also houses the various components that make u...

Samsung Screw-Machine Part# 6001-002750 is a type of screw machine used in the production of Samsung products. It is a high-speed, automated machine that is capable of producing screws with precision and accuracy. The machine uses a variety of cutting tools to cut and shape the screws into the des...

Samsung Screw-Tapping Part# 6002-001306 is a specialized screw used in Samsung products. It is a self-tapping screw that has a unique thread design which allows it to be used in various applications. The screw is made from high-grade steel and has a black oxide finish for corrosion resistance. The...

The Samsung PartsIPS Kenmore Clothes Washer Washing Machine Water Temperature Thermostat Thermistor - Part# DC90-10128N is a temperature sensing device used in washing machines to regulate the water temperature. It is designed to sense the temperature of the water entering the washer and adjust th...

Samsung SENSOR-PRESSURE - Part# DC96-01703H is a pressure sensor manufactured by Samsung. It is a small, low-cost, and highly accurate pressure sensor that can be used in a variety of applications. The sensor is designed to measure absolute pressure in the range of 0 to 1 bar (0 to 14.5 psi). It h...

Samsung SWITCH-DOOR LOCK - Part# DC34-00025E is a smart door lock that allows you to control access to your home or office with the convenience of your smartphone. It is designed to replace traditional locks and keys, allowing you to control who has access to your home or office with the touch of ...