Model: RGAS200DM1WW

The Burner Large V2 - Part# WB16X24723 is a replacement part for a range or oven. It is a large burner that is used to provide heat to the cooking surface. The burner has two parts: the burner head and the burner base. The burner head is made of stainless steel and has a large diameter of 8 inches...

GE Bracket Asm Anti-Tip - Part# WB02X30959 is a safety bracket designed to prevent a range from tipping over. It is used to secure the range to the floor or wall, and is installed on the back of the range. The bracket consists of two metal pieces that are connected by a screw and nut. The bracket ...

The GE Electric Thermostat (Part# WB24X24270) is a digital thermostat designed to control the temperature of an electric heating system. It features a large, easy-to-read LCD display and simple push-button controls. The thermostat can be programmed to maintain a desired temperature in your home or...

GE Electrode Top & Harness Hv - Part# WB18X30975 is a replacement part for a variety of GE ovens. It is the top electrode and harness assembly for the high voltage system in the oven. The part includes the electrode, two wires, and a connector. The electrode is used to create an electrical arc bet...

GE Harness Switches - Part# WB18X31143 are a set of switches designed to be used in General Electric (GE) ovens. The switches are designed to control the power supply to the oven, allowing it to be turned on and off. The switches are also used to control the temperature of the oven, allowing it to...

The GE Ignition Module Part# WB13X24323 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic component that controls the ignition of the oven’s gas burners. The module works by sending an electrical signal to the spark igniter, which then ignites the gas. The module ...

The GE KNOB MINIVALVE WHITE - Part# WB03X31144 is a replacement part for a range or oven. It is a white plastic knob that fits onto the valve stem of the range or oven. The knob has a black plastic insert with a pointer that indicates the temperature setting. This knob is used to control the tempe...

The GE Knob Thermostat White (Part# WB03X31145) is a replacement knob for a variety of GE thermostats. This knob is designed to fit the following models: GTW460ASJWW, GTW460ASJ4WW, GTW485ASJWS, GTW485ASJ4WS, and GTW490ACJWS. It is made of durable plastic and features a white finish. The knob has a...

The GE Round Valve Burner 140 (Part# WB21K10169) is a replacement part for GE gas ranges. It is a round valve burner that has a 140 BTU rating and is designed to fit into a range top. The burner has an adjustable air shutter and is made of durable stainless steel. It also features an easy-to-clean...

The GE Round Valve Burner 140 - Part# WB21K10170 is a replacement part for a gas range. It is designed to replace the round valve burner on a GE gas range. This part is made of durable metal and features a round shape with four mounting holes. The burner has an output of 140 BTU/hr and is designed...

The GE Safety Valve Part# WB21X31124 is a safety valve designed to protect your home from dangerous gas buildup. It is designed to automatically shut off the gas supply if the pressure in the gas line exceeds a certain level. This valve is typically installed on the main gas line near the meter an...

GE SCR 8-18 AB X 5/16S - Part# WB01X26995 is a stainless steel screw used in various GE appliances. It is an 8-18 AB x 5/16 inch stainless steel screw with a part number of WB01X26995. This screw is used to secure the control panel to the frame of the appliance. It is made from stainless steel for...

A hinge door, also known as a pivot door, is a type of door that is attached to the wall or frame by one or more hinges. The hinge allows the door to swing open in either direction and can be used for both interior and exterior doors. The Hinge Door Part# WB10X26678 is a genuine OEM part from GE A...

The Range Broil Element Clip (Part# WB01X26891) is a replacement part for a range or oven. It is used to secure the broil element to the back wall of the oven. The clip is made of metal and has two prongs that fit into two holes in the back wall of the oven. The clip then holds the broil element i...