Model: RFG297AARS-XAA-00

A/S DRYER - Part# DA81-06006A is a Samsung dryer part. It is a drum roller assembly, which is used to support the drum in the dryer. The roller assembly helps to reduce noise and vibration during the drying cycle. It also helps to ensure that the clothes are evenly dried. The roller assembly consi...

The ASSY CAP-CHUTE ICE - Part# DA97-05353A is a replacement part for Samsung refrigerators. It is the ice chute cover assembly, which is the plastic cover that fits over the ice chute on the outside of the refrigerator door. This part helps to keep out dust and debris from entering the ice chute a...

The ASSY CAP-DRAIN - Part# DA97-04049D is a replacement part for Samsung refrigerators. It is a drain cap assembly that is used to prevent water from leaking out of the refrigerator's drain pan. The part includes a plastic cap, a rubber gasket, and two screws. The cap fits over the drain hole in t...

ASSY CASE - ICE ROUTE - Part# DA97-07361T is an assembly case for a refrigerator ice maker route. It is a part used in Samsung refrigerators and includes the parts necessary to connect the ice maker to the water supply. The part number DA97-07361T is used to identify this particular assembly case....

The ASSY CASE-FILTER - Part# DA97-06317A is a replacement part for Samsung refrigerators. It is a filter case assembly that houses the water filter and helps to ensure that the water is filtered properly. The filter case assembly includes the filter housing, mounting bracket, and screws. It also i...

The ASSY COVER - Part# DA97-06323D is a refrigerator part manufactured by Samsung. It is a cover assembly for the refrigerator's evaporator fan motor. This part helps to protect the fan motor from dust and other debris, while also providing insulation to help keep the refrigerator cool. The cover ...

The ASSY COVER-SENSOR - Part# DA97-02019B is a replacement part for Samsung refrigerators. It is a plastic cover that fits over the temperature sensor in the refrigerator. The temperature sensor is responsible for monitoring the internal temperature of the refrigerator and sending signals to the c...

The ASSY GUARD DISPENSER - Part# DA97-06425C is a part used in refrigerators to dispense water and ice. It is a part of the water filter assembly and is responsible for controlling the flow of water from the filter to the ice maker. The dispenser includes a valve, a motor, and an electronic contro...

The ASSY GUARD FF R - Part# DA97-06419C is a refrigerator guard designed to protect the refrigerator from damage. It is made of a durable plastic material and is designed to fit most standard refrigerators. The guard fits over the front of the refrigerator and helps to protect it from scratches, d...

The ASSY RAIL-SLIDE LOW R - Part# DA97-13662A is a part used in Samsung refrigerators. It is a rail slide assembly that is used to support the refrigerator drawers and shelves. The rail slide assembly consists of two rails, one on each side of the refrigerator, and a set of rollers that attach to ...

The ASSY RAIL-VEG R - Part# DA97-04840A is a part used in Samsung refrigerators. It is the right vegetable drawer rail assembly for the refrigerator. This part helps to support and guide the vegetable drawer as it slides in and out of the refrigerator. It is made of plastic and metal and includes ...

ASSY TANK WATER - Part# DA97-07150A is an assembly part for a refrigerator. It is the water tank assembly for a Samsung refrigerator. This part includes the water tank, the water inlet valve, and the float switch. The water tank is responsible for storing and supplying cold water to the refrigerat...

The Assy Tray-Drain Water - Part# DA97-05043C is a part used in Samsung refrigerators. It is a plastic tray that collects water from the refrigerator's defrost cycle and drains it to the outside of the unit. The tray is located at the bottom of the refrigerator and is connected to a drain tube. Th...

ASSY-FRENCH - Part# DA97-06417F is a refrigerator ice maker assembly. It is a replacement part for Samsung refrigerators and is used to replace the existing ice maker in the refrigerator. The part includes the ice maker, water valve, and tubing. It also includes a new mounting bracket and hardware...

The ASSY-GASKET DOOR REF - Part# DA97-05253E is a replacement part for Samsung refrigerators. It is a gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of durable rubber and is designed to fit the specific model of Samsung refrigerator. It is e...

The CAP-CASE FRENCH MID - Part# DA67-01701A is a French-style mid-sized case designed to protect and store a variety of items. It is made from durable polypropylene and features a snap closure lid with two recessed handles for easy carrying. The interior of the case has two removable dividers, all...

CAP-HANDLE FRE L - Part# DA67-02057A is a refrigerator handle that is used to open and close the refrigerator door. It is made of plastic and has a black finish. The handle measures approximately 4.5 inches in length and 1.5 inches in width. It has two mounting holes for easy installation and come...

CAP-HANDLE FRE R - Part# DA67-02056A is a refrigerator handle manufactured by Samsung. It is designed to fit on the side of a refrigerator door and is made of durable plastic. The handle has a black finish and features a chrome-plated steel insert for added strength and durability. The handle also...

CASTER-FRONT - Part# DA61-04702A is a caster wheel that is used to support the front of a refrigerator. It is made of durable plastic and has a steel stem for mounting. The wheel has a diameter of 2.5 inches and is designed to fit most standard refrigerators. It also features an adjustable height,...

CASTER-REAR - Part# DA61-04703A is a rear caster wheel assembly for Samsung refrigerators. It is used to support the refrigerator and allow it to move easily when needed. The caster wheel assembly includes two caster wheels, two mounting brackets, and four screws. The caster wheels are made of dur...

The FAN-AX100W4CC-T1 - Part# DA31-00124A is a fan assembly for Samsung refrigerators. It is a 4-wire, 100 watt, 120V AC motor with a thermal overload protector. The fan is designed to circulate air within the refrigerator and help maintain an even temperature throughout the appliance. The fan also...

FF DOOR HANDLE FIXER - Part# DA61-03734A is a replacement part for Samsung refrigerator door handles. It is used to replace broken or worn out door handles on Samsung refrigerators. The part includes two plastic clips that attach to the refrigerator door handle and a metal bracket that attaches to...

FIXER-SENSER - Part# DA61-03683A is a part used in Samsung refrigerators. It is a temperature sensor that helps to regulate the temperature inside the refrigerator. The sensor is located in the back of the refrigerator and monitors the temperature inside the refrigerator. It then sends a signal to...

A freezer door gasket, also known as a refrigerator door seal, is a rubber or plastic seal that is installed around the perimeter of a refrigerator or freezer door to ensure an airtight seal. The gasket helps to keep cold air in and warm air out, thus helping to maintain the desired temperature in...

A French hinge, also known as a double-action hinge, is a type of hinge that allows a door to swing in both directions. It is typically used on doors that open both inward and outward, such as those found on some French doors. The French hinge consists of two leaves that are connected by a pin. Th...

HEATER-METAL SHEATH - Part# DA47-00244C is a replacement part for Samsung dryers. It is a metal sheath that houses the heating element in the dryer. The metal sheath helps to protect the heating element from damage and wear and tear. It also helps to keep the heat inside the dryer, allowing it to ...

HEATER-WATER TANK - Part# DA47-00295A is a replacement part for Samsung refrigerators. It is a plastic water tank that holds the water used to make ice and dispense cold water. The tank is connected to the refrigerator's water line and has an electric heating element inside that helps keep the wat...

The Ice Bucket Tray Assembly (Part# DA97-11117A) is a part used in Samsung refrigerators. It is the container that holds the ice cubes and dispenses them when needed. The tray is made of plastic and has a removable lid that can be opened to access the ice cubes. The tray also has a handle for easy...

The LH Lower Rail Slide Assy - Part# DA97-13661A is a part used in refrigerators. It is the left hand lower rail slide assembly, which is responsible for supporting the refrigerator door. This part includes two rails and four plastic slides that are used to guide the door as it opens and closes. T...

MASCOT (Multi-Axis Servo Control and Optimization Technology) is a patented technology developed by Samsung Electronics that enables precise control of multiple servo motors in a single system. It is used in a variety of applications, including robotics, industrial automation, and consumer electro...

A DC-DAMPER Motor (Part# DA31-00071G) is a type of motor that is used to control the movement of a door or window. It is designed to provide smooth and quiet operation, while also providing a high level of security. The motor is powered by a DC voltage and features an integrated damper system that...

PIN-FRENCH SPRING - Part# DA81-01346A is a part used in many Samsung refrigerators. It is a plastic pin that helps to secure the French door spring assembly to the refrigerator door. The pin is inserted into the top of the French door spring assembly and then secured with a nut and bolt. This part...

PLATE-INS EVAP REF - Part# DA61-03186C is a replacement evaporator plate for Samsung refrigerators. It is made of stainless steel and is designed to fit into the refrigerator's evaporator compartment. The plate helps to evenly distribute cold air throughout the refrigerator, ensuring that food sta...

A Reed Switch Assembly is a type of electrical switch that uses an electromagnet to control the opening and closing of a pair of contacts. The Reed Switch Assembly Part# DA34-00043B is a normally open type switch, meaning that when the magnet is not present, the contacts are open. When the magnet ...

A relay protector, also known as a surge protector, is a device designed to protect electrical circuits from damage caused by power surges. It works by diverting excess current away from the circuit, preventing it from reaching the sensitive components of the system. The relay protector is typical...

The Samsung Auger-Case Motor (Part# DA97-05246G) is a motor used in Samsung refrigerators to drive the auger that dispenses ice and water. It is a 120V, 60Hz, 0.7A motor with a shaft diameter of 5/16 inches. The motor is designed to be used with Samsung refrigerator models RF263BEAESR, RF263TEAESR...

Samsung BACKWARD FAN - Part# DA31-00053A is a fan motor assembly for Samsung refrigerators. It is designed to circulate air within the refrigerator to maintain an even temperature throughout the appliance. The fan motor is mounted on the back wall of the refrigerator and has a reverse direction fe...

The Samsung Case-Motor Fre Ice Part# DA61-03617A is a replacement part for Samsung refrigerators. It is a motorized fan assembly that helps to circulate air throughout the refrigerator and freezer compartments. This part helps to ensure that the temperature in both compartments remains consistent ...

Samsung Cover Evap-Ref - Part# DA63-04218A is a replacement part for Samsung refrigerators. It is the cover for the evaporator and refrigerator fan motor. This part helps to keep the refrigerator cool by circulating air through the evaporator coils. The cover also helps to protect the fan motor fr...

The Samsung Cover-Heater French is a replacement part for Samsung refrigerators. It is a heating element that is used to keep the refrigerator door closed and sealed. The part number DA63-03454B is specific to certain models of Samsung refrigerators. This part helps to keep the door from becoming ...

Samsung COVER-VEG REF - Part# DA97-06329A is a refrigerator vegetable drawer cover. It is designed to fit select Samsung refrigerator models and is made of durable plastic. The cover helps keep vegetables fresh and organized in the refrigerator. It features a removable divider that can be used to ...

The Samsung Crisper Drawer Shelf Cap (Part# DA61-03166A) is a replacement part for Samsung refrigerators. It is a plastic shelf cap that fits over the top of the crisper drawer to help keep items from falling out. The cap also helps to keep the drawer closed and prevent items from spilling out whe...

The Samsung Evap Heater Plate - Part# DA61-03644A is a replacement part for Samsung refrigerators. It is an evaporator heater plate that helps to keep the refrigerator cool by circulating cold air throughout the interior. The evaporator heater plate is located in the back of the refrigerator and h...

Samsung Fixer-Sensor Evap Part# DA61-02901A is a replacement part for Samsung refrigerators. It is an evaporator temperature sensor that helps to regulate the temperature inside the refrigerator. The sensor monitors the temperature of the evaporator and sends a signal to the main control board whe...

Samsung Guard-Dairy is a refrigerator water filter designed to reduce contaminants in drinking water. It is a genuine OEM (Original Equipment Manufacturer) part that is made specifically for Samsung refrigerators. The filter is designed to reduce chlorine taste and odor, as well as sediment, rust,...

Samsung Handle-Spring Etc - Part# DA61-04335B is a replacement part for Samsung refrigerators. It is a handle spring that is used to attach the refrigerator door handle to the door. The handle spring is made of metal and has a black finish. It measures approximately 2 inches in length and 1 inch i...

Samsung Rail-Slide Low Rh - Part# DA61-09088A is a refrigerator part designed to help keep the refrigerator door in place. It is a plastic rail that slides along the bottom of the refrigerator door and attaches to the bottom of the refrigerator cabinet. The rail helps keep the door from swinging o...

The Samsung Ref Dispenser Tray - Part# DA63-03695B is a replacement part for Samsung refrigerators. It is the tray that holds the water and ice dispenser on the outside of the refrigerator door. This part is made of durable plastic and is designed to fit perfectly in place. It includes a small dra...

Samsung Screw-Tapping Part# 6002-000215 is a specialized screw designed for use in Samsung products. It is a self-tapping screw, meaning that it can be used to create its own thread in the material it is being screwed into. This makes it ideal for use in applications where a pre-tapped hole is not...

Samsung Screw-Tapping Part# 6002-001306 is a specialized screw used in Samsung products. It is a self-tapping screw that has a unique thread design which allows it to be used in various applications. The screw is made from high-grade steel and has a black oxide finish for corrosion resistance. The...

The Samsung PartsIPS Kenmore Refrigerator Condenser Fan Motor (Part# DA31-00146B) is a replacement part for Samsung refrigerators. It is responsible for circulating air around the condenser coils to help keep the refrigerator cool. The fan motor is located behind the refrigerator and helps to diss...

The Samsung PartsIPS Kenmore Refrigerator Evaporator Fan Motor (Part# DA31-00146E) is a replacement part for Samsung and Kenmore refrigerators. It is responsible for circulating air throughout the refrigerator to ensure that the temperature remains consistent. The motor is located in the back of t...

The Samsung PartsIPS Kenmore Refrigerator Fan Blade - Part# DA31-00010D is a replacement part for Samsung, PartsIPS, and Kenmore refrigerators. This fan blade is designed to help circulate air throughout the refrigerator and freezer compartments. It is made of durable plastic and measures approxim...

The Samsung PartsIPS Kenmore Refrigerator Freezer Evaporator Defrost Temperature Sensor - Part# DA32-00027B is a temperature sensor that is used in refrigerators and freezers to monitor the temperature of the evaporator. The evaporator is the part of the refrigerator or freezer that cools the air ...

The Samsung PartsIPS Kenmore Refrigerator Freezer Evaporator Fan Motor - Part# DA31-00146H is a replacement part for Samsung, PartsIPS, and Kenmore refrigerators. This fan motor is responsible for circulating air throughout the refrigerator and freezer compartments. It helps to keep the temperatur...

The Samsung PartsIPS Kenmore Refrigerator Ice Maker Part# DA97-05422A is a replacement ice maker for select Samsung, PartsIPS, and Kenmore refrigerators. This part is designed to replace the original ice maker in your refrigerator and provide you with a reliable source of ice. The DA97-05422A is a...

The Samsung PartsIPS Kenmore Refrigerator Ice Maker Water Inlet Fill Valve - Part# DA62-00914B is a replacement part for Samsung, PartsIPS, and Kenmore refrigerators. This part is responsible for controlling the flow of water into the ice maker in order to make ice cubes. The valve is made of dura...

The Samsung PartsIPS Kenmore Refrigerator Main PCB Printed Circuit Control Board Assembly - Part# DA41-00538A is a replacement part for Samsung and Kenmore refrigerators. It is the main printed circuit board assembly that controls the operation of the refrigerator. This part includes all of the ne...

Samsung SHAFT-CASTER - Part# DA66-00649B is a replacement part for Samsung washing machines. It is a metal shaft with a caster wheel attached to the end. The caster wheel allows the washing machine to move freely when it is being moved or transported. The shaft is made of durable metal and is desi...

Samsung Spring-Etc Auto Close Part# DA61-03301A is a replacement part for Samsung refrigerators. It is a spring-loaded, auto-closing door mechanism that helps keep the refrigerator door closed and sealed. The part is made of metal and plastic and is designed to fit most Samsung refrigerator models...

The Samsung Water Filter Housing Assy - Part# DA97-07129C is a replacement part for Samsung refrigerators. It is the housing assembly for the water filter, which is used to filter out impurities from the water supply before it enters the refrigerator. The housing assembly includes a filter holder,...

Samsung Wire Harness-Compressor - Part# DA39-00154D is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with Samsung refrigerators. This wire harness is used to connect the compressor to the main control board in the refrigerator. It includes two wires, one black and o...

A SENSOR (Part# DA32-00006R) is a device that detects and responds to changes in its environment. It is used to measure physical properties such as temperature, pressure, humidity, light intensity, sound intensity, etc. The sensor converts the physical property into an electrical signal which can ...

The SHAFT-CAP HANDLE, Part# DA66-00579A, is a replacement part for Samsung refrigerators. It is a plastic handle that fits onto the shaft of the refrigerator door and provides a secure grip for opening and closing the door. The handle is made of durable plastic and features a textured surface for ...

Spring-Etc French is a type of spring that is designed to provide tension and support for a variety of applications. It is made from high-grade steel and features a unique design that allows it to be used in a variety of ways. The spring has two ends, one with a flat surface and the other with an ...

SWITCH DOOR-F - Part# DA34-10120E is a door switch manufactured by Samsung. It is a normally open type switch, meaning that when the door is closed, the switch will be in the open position. The switch has two terminals and is designed to be used with a 12V DC power source. It has a contact rating ...

TRIM-COVER EVAP REF - Part# DA64-02065A is a part used in Samsung refrigerators. It is a trim cover for the evaporator fan motor. This part is used to cover the evaporator fan motor and protect it from dust and debris. It also helps to keep the evaporator fan motor in place and prevent it from vib...

Window-Shelf Pantry - Part# DA64-02235A is a shelf designed to fit in the window of a kitchen pantry. It is made of durable plastic and features a sleek, modern design. The shelf has two tiers, with the top tier being slightly larger than the bottom tier. The shelf can be used to store items such ...