Model: RF266AABP-XAA-00

The ASSY CAP-DRAIN - Part# DA97-04049D is a replacement part for Samsung refrigerators. It is a drain cap assembly that is used to prevent water from leaking out of the refrigerator's drain pan. The part includes a plastic cap, a rubber gasket, and two screws. The cap fits over the drain hole in t...

The ASSY CASE-FILTER - Part# DA97-06317A is a replacement part for Samsung refrigerators. It is a filter case assembly that houses the water filter and helps to ensure that the water is filtered properly. The filter case assembly includes the filter housing, mounting bracket, and screws. It also i...

The ASSY COVER-DISPENSER - Part# DA97-04952B is a replacement part for Samsung refrigerators. It is the cover for the water and ice dispenser on the outside of the refrigerator door. This part is made of plastic and is designed to fit over the dispenser to protect it from dirt, dust, and other deb...

The ASSY COVER-RAIL PANTRY L - Part# DA97-04830C is a replacement part for Samsung refrigerators. It is the left side pantry rail cover assembly for the refrigerator. This part is made of plastic and is used to cover the pantry rail on the left side of the refrigerator. It includes two screws and ...

The ASSY RAIL-SLIDE LOW L - Part# DA97-08805B is a part used in Samsung refrigerators. It is a slide rail assembly that is used to support the bottom shelf of the refrigerator. The part consists of two rails and four plastic clips that attach to the bottom of the refrigerator cabinet. The rails ar...

The ASSY RAIL-SLIDE LOW R - Part# DA97-08806B is a part used in Samsung refrigerators. It is a rail slide assembly that helps to support the refrigerator door. The part consists of two rails and two rollers that are connected to the bottom of the refrigerator door. The rollers help to guide the do...

The ASSY RAIL-VEG R - Part# DA97-04840A is a part used in Samsung refrigerators. It is the right vegetable drawer rail assembly for the refrigerator. This part helps to support and guide the vegetable drawer as it slides in and out of the refrigerator. It is made of plastic and metal and includes ...

The ASSY-PIPE WATER FRE - Part# DA97-00209W is a part used in Samsung refrigerators. It is a water pipe assembly that connects the water supply line to the refrigerator's water valve. This part helps to ensure that the refrigerator has a steady and reliable supply of water for its ice maker and wa...

A button-cover dispenser, Part# DA64-02113A, is a device used to dispense button covers for clothing. It is typically used in the garment industry to quickly and easily attach buttons to garments. The device consists of a plastic housing with a spring-loaded plunger that holds the button covers in...

The CAP-CASE FRENCH MID - Part# DA67-01701A is a French-style mid-sized case designed to protect and store a variety of items. It is made from durable polypropylene and features a snap closure lid with two recessed handles for easy carrying. The interior of the case has two removable dividers, all...

CASTER-FRONT - Part# DA61-04702A is a caster wheel that is used to support the front of a refrigerator. It is made of durable plastic and has a steel stem for mounting. The wheel has a diameter of 2.5 inches and is designed to fit most standard refrigerators. It also features an adjustable height,...

CASTER-REAR - Part# DA61-04703A is a rear caster wheel assembly for Samsung refrigerators. It is used to support the refrigerator and allow it to move easily when needed. The caster wheel assembly includes two caster wheels, two mounting brackets, and four screws. The caster wheels are made of dur...

The FAN-AX100W4CC-T1 - Part# DA31-00124A is a fan assembly for Samsung refrigerators. It is a 4-wire, 100 watt, 120V AC motor with a thermal overload protector. The fan is designed to circulate air within the refrigerator and help maintain an even temperature throughout the appliance. The fan also...

FIXER-HANDLE - Part# DA61-02984A is a replacement handle for Samsung refrigerators. It is designed to replace the original handle that may have become worn or damaged over time. The handle is made of durable plastic and features a textured finish for a secure grip. It is easy to install and comes ...

FIXER-SENSOR;AD,URETHANE F - Part# DA61-01800A is a part used in Samsung printers. It is a Fixer Sensor Assembly that is made of urethane and is used to detect the presence of paper in the printer. The part number DA61-01800A identifies this particular part and helps to differentiate it from other...

A French hinge, also known as a double-action hinge, is a type of hinge that allows a door to swing in both directions. It is typically used on doors that open both inward and outward, such as those found on some French doors. The French hinge consists of two leaves that are connected by a pin. Th...

GROMMET-MOTOR, FRONT - Part# DA63-01808A is a grommet used to secure the front motor of a vehicle. It is made of rubber and is designed to fit into the hole in the firewall of the vehicle. The grommet helps to reduce vibration and noise from the motor, as well as providing a seal against dust and ...

Guard-Dairy Part# DA63-03455A is a food safety monitoring system designed to help dairy producers and processors maintain the highest standards of food safety. The system includes a suite of software, hardware, and services that enable dairy producers and processors to monitor, analyze, and report...

Guard-REF Part# DA63-03467A is a refrigerator door guard designed to protect the refrigerator door from accidental damage. It is made of durable plastic and is designed to fit most standard refrigerators. The guard attaches to the top and bottom of the refrigerator door with screws, and has a lock...

GUIDE ICE FULL - Part# DA61-00954B is a replacement part for Samsung refrigerators. It is a full ice guide assembly that helps to direct the ice from the ice maker into the ice bucket. The part includes the guide, two screws, and a bracket. The guide is made of plastic and is designed to fit speci...

HEATER-METAL SHEATH - Part# DA47-00244A is a replacement part for Samsung dryers. It is a metal sheath that covers the heating element in the dryer. The metal sheath helps to protect the heating element from dust and other debris, as well as providing insulation to help keep the heat in. This part...

A LAMP HOLDER, Part# DA47-40001E, is a device used to hold a light bulb in place. It is typically made of plastic or metal and consists of two parts: the base and the socket. The base is attached to the wall or ceiling and provides a secure mounting point for the socket. The socket holds the light...

A metal sheath heater, also known as a tubular heater, is a type of electric heating element used in industrial and commercial applications. It consists of a metal tube or sheath that is filled with an electrical resistance wire. The metal sheath is then filled with an insulating material such as ...

A DC-DAMPER Motor (Part# DA31-00071G) is a type of motor that is used to control the movement of a door or window. It is designed to provide smooth and quiet operation, while also providing a high level of security. The motor is powered by a DC voltage and features an integrated damper system that...

PIN-FRENCH SPRING - Part# DA81-01346A is a part used in many Samsung refrigerators. It is a plastic pin that helps to secure the French door spring assembly to the refrigerator door. The pin is inserted into the top of the French door spring assembly and then secured with a nut and bolt. This part...

PLATE-INS EVAP REF - Part# DA61-03186C is a replacement evaporator plate for Samsung refrigerators. It is made of stainless steel and is designed to fit into the refrigerator's evaporator compartment. The plate helps to evenly distribute cold air throughout the refrigerator, ensuring that food sta...

A Reed Switch Assembly is a type of electrical switch that uses an electromagnet to control the opening and closing of a pair of contacts. The Reed Switch Assembly Part# DA34-00043B is a normally open type switch, meaning that when the magnet is not present, the contacts are open. When the magnet ...

Samsung Caster-Rivet - Part# DA61-01920A is a part used in Samsung refrigerators. It is a small metal piece that attaches the caster wheel to the refrigerator's base. The caster wheel allows the refrigerator to be moved easily and smoothly across a variety of surfaces. The rivet is made of durable...

The Samsung Cover-Heater French is a replacement part for Samsung refrigerators. It is a heating element that is used to keep the refrigerator door closed and sealed. The part number DA63-03454B is specific to certain models of Samsung refrigerators. This part helps to keep the door from becoming ...

The Samsung Cover-Motor Damper (Part# DA97-06324C) is a replacement part for Samsung refrigerators. It is a small plastic part that helps to reduce the noise and vibration caused by the refrigerator’s motor. The damper helps to absorb the energy from the motor, which reduces the amount of noise an...

The Samsung Crisper Drawer Shelf Cap (Part# DA61-03166A) is a replacement part for Samsung refrigerators. It is a plastic shelf cap that fits over the top of the crisper drawer to help keep items from falling out. The cap also helps to keep the drawer closed and prevent items from spilling out whe...

The Samsung Evaporator-Fre Part# DA59-00358A is a part used in refrigerators and freezers. It is an evaporator fan motor that circulates air throughout the refrigerator or freezer. The fan motor helps to keep the temperature inside the appliance consistent and cool. The evaporator fan motor is loc...

Samsung Fixer-Sensor Evap Part# DA61-02901A is a replacement part for Samsung refrigerators. It is an evaporator temperature sensor that helps to regulate the temperature inside the refrigerator. The sensor monitors the temperature of the evaporator and sends a signal to the main control board whe...

The Samsung Freezer Door Gasket (Part# DA97-05557X) is a replacement part for Samsung refrigerators. It is a rubber seal that runs along the inside of the freezer door, and helps to keep cold air in and warm air out. The gasket helps to ensure that the refrigerator maintains its optimal temperatur...

The Samsung Incandescent Lamp - Part# 4713-001622 is a high-quality, long-lasting light bulb that is designed to provide bright, clear illumination. This lamp is ideal for both residential and commercial applications. It features a standard E26 base and is rated for up to 250 watts of power. The l...

The Samsung Maytag Whirlpool PartsIPS Kenmore Refrigerator Ice Cube Tray - Part# DA63-02284B is a replacement part for select Samsung, Maytag, Whirlpool, PartsIPS and Kenmore refrigerators. This ice cube tray is made of durable plastic and is designed to fit perfectly in the freezer compartment of...

The Samsung Plate-Drain Ref is a replacement part for Samsung refrigerators. It is a plastic plate that sits at the bottom of the refrigerator and helps to collect and drain away any condensation or water that accumulates in the refrigerator. The part number for this item is DA61-06186B. This part...

Samsung Rail-Slide Low Rh - Part# DA61-09088A is a refrigerator part designed to help keep the refrigerator door in place. It is a plastic rail that slides along the bottom of the refrigerator door and attaches to the bottom of the refrigerator cabinet. The rail helps keep the door from swinging o...

The Samsung Roller Assy - Part# DA97-05932A is a part used in Samsung refrigerators. It is a roller assembly that helps to support the refrigerator door and keep it in place. The roller assembly consists of two rollers, one on each side of the door, and a bracket that attaches to the refrigerator ...

Samsung Screw-Tapping Part# 6002-000215 is a specialized screw designed for use in Samsung products. It is a self-tapping screw, meaning that it can be used to create its own thread in the material it is being screwed into. This makes it ideal for use in applications where a pre-tapped hole is not...

Samsung Screw-Tapping Part# 6002-001122 is a specialized tapping tool designed for use with Samsung's range of electronic products. It is used to create threaded holes in the chassis of the device, allowing for the installation of screws and other fasteners. The tool features a unique design that ...

The Samsung PartsIPS Kenmore Refrigerator Fan Blade - Part# DA31-00010D is a replacement part for Samsung, PartsIPS, and Kenmore refrigerators. This fan blade is designed to help circulate air throughout the refrigerator and freezer compartments. It is made of durable plastic and measures approxim...

The Samsung PartsIPS Kenmore Refrigerator Freezer Evaporator Fan Motor - Part# DA31-00146H is a replacement part for Samsung, PartsIPS, and Kenmore refrigerators. This fan motor is responsible for circulating air throughout the refrigerator and freezer compartments. It helps to keep the temperatur...

The Samsung PartsIPS Kenmore Refrigerator ICE MAKER - Part# DA97-07603B is a replacement ice maker for select Samsung, PartsIPS, and Kenmore refrigerators. This ice maker is designed to produce up to 2.5 lbs of ice per day and can store up to 1.5 lbs of ice at a time. It features an easy-to-use co...

The Samsung PartsIPS Kenmore Refrigerator ICE MAKER ASSEMBLY - Part# DA59-00294B is a replacement part for Samsung refrigerators. It is an ice maker assembly that includes the ice maker, mounting bracket, and wire harness. The ice maker is responsible for producing and dispensing ice cubes from th...

The Samsung PartsIPS Kenmore Refrigerator Ice Maker Water Inlet Fill Valve - Part# DA62-00914B is a replacement part for Samsung, PartsIPS, and Kenmore refrigerators. This part is responsible for controlling the flow of water into the ice maker in order to make ice cubes. The valve is made of dura...

Samsung Sensor-Cover Part# DA63-02183A is a replacement part for Samsung refrigerators. It is a plastic cover that fits over the temperature sensor located in the refrigerator’s evaporator fan motor. The sensor helps to regulate the temperature inside the refrigerator by detecting changes in air t...

Samsung Spring-Etc Auto Close Part# DA61-03301A is a replacement part for Samsung refrigerators. It is a spring-loaded, auto-closing door mechanism that helps keep the refrigerator door closed and sealed. The part is made of metal and plastic and is designed to fit most Samsung refrigerator models...

Samsung Switch-Micro (Part# 3405-001117) is a small, low-cost, and easy to use switch designed for use in a variety of applications. It is a micro switch with a single pole double throw (SPDT) configuration. This switch is designed to be used in a variety of applications such as industrial control...

The Samsung Temp-Sensor Part# DA32-10105B is a temperature sensor designed to measure the temperature of refrigerators and freezers. It is a thermistor type sensor, which means it uses a resistance value to measure temperature. The resistance value changes with the temperature, so the sensor can a...

The Samsung Wire Harness-Motor - Part# DA39-00060K is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with Samsung washing machines. This wire harness is used to connect the motor to the main control board. It consists of two wires, one black and one white, that are c...

A SENSOR (Part# DA32-00006R) is a device that detects and responds to changes in its environment. It is used to measure physical properties such as temperature, pressure, humidity, light intensity, sound intensity, etc. The sensor converts the physical property into an electrical signal which can ...

SENSOR TEMP-F-DEF - Part# DA32-00006Q is a temperature sensor manufactured by Samsung. It is a digital temperature sensor that measures the ambient temperature of a given environment. The sensor is designed to be used in a variety of applications, including HVAC systems, refrigeration systems, and...

Spring-Etc French is a type of spring that is designed to provide tension and support for a variety of applications. It is made from high-grade steel and features a unique design that allows it to be used in a variety of ways. The spring has two ends, one with a flat surface and the other with an ...

SWITCH DOOR-F - Part# DA34-10120E is a door switch manufactured by Samsung. It is a normally open type switch, meaning that when the door is closed, the switch will be in the open position. The switch has two terminals and is designed to be used with a 12V DC power source. It has a contact rating ...

Thermo bimetal, also known as thermal bimetal, is a type of temperature-sensing device that consists of two different metals bonded together. The two metals have different coefficients of thermal expansion, meaning that when the temperature changes, one metal will expand more than the other. This ...

Thermo Bimetal Protector Part# DA47-00243D is a device used to protect electrical appliances from overheating. It is a bimetallic strip that consists of two different metals bonded together. When the temperature rises, the two metals expand at different rates, causing the strip to bend and open an...

TRIM-COVER EVAP REF - Part# DA64-02065A is a part used in Samsung refrigerators. It is a trim cover for the evaporator fan motor. This part is used to cover the evaporator fan motor and protect it from dust and debris. It also helps to keep the evaporator fan motor in place and prevent it from vib...