Model: RB720DH2WW

The GE Bowl Burner 6 (CH) - Part# WB31K10265 is a replacement burner bowl for select GE gas ranges. It is made of durable porcelain-coated steel and features a 6-inch diameter. This bowl burner is designed to fit select GE gas ranges and replaces the original bowl burner that came with the range. ...

The GE Bowl Burner 8 (CH) - Part# WB31K10266 is a replacement burner bowl for GE gas ranges. It is made of durable porcelain-enameled steel and is designed to fit most GE gas ranges. The bowl measures 8 inches in diameter and has a chrome finish. It features a center hole for the burner head, as w...

GE Bracket Asm Anti-Tip - Part# WB02X27862 is a bracket assembly designed to prevent a range from tipping over. It is made of metal and attaches to the rear of the range and the floor. The bracket helps to keep the range in place, even if it is bumped or pushed. It also helps to reduce the risk of...

The GE Bracket Cook Top - Part# WB37X20193 is a replacement part for a GE range. It is a metal bracket that attaches to the underside of the cooktop and supports the cooktop in place. The bracket is made of durable metal and is designed to fit all GE ranges. It includes two screws for installation...

GE Bracket Door (Part# WB02K10245) is a replacement part for GE ovens. It is a metal bracket that attaches to the oven door and helps to keep it in place. The bracket is made of stainless steel and has two mounting holes for easy installation. It also includes two screws for securing the bracket t...

GE CLIP RECEPTICAL - Part# WB02K10133 is a replacement part for a range of GE ovens. It is a receptacle clip that holds the receptacle in place on the back of the oven. The clip is made of plastic and has two prongs that fit into the holes in the back of the oven. The clip also has two screws that...

GE Crystal Window is a part number WB56X23809, which is a window assembly for GE brand refrigerators. This window assembly includes the frame, glass, and seal that are used to create the window in the refrigerator door. The frame is made of plastic and the glass is tempered for safety. The seal he...

The GE Frame Front Bumper (Part# WB02X28738) is a replacement part for select GE dishwashers. It is made of durable plastic and is designed to fit the front of the dishwasher frame. The bumper helps protect the dishwasher from damage caused by accidental bumps or scrapes. It also helps keep the di...

GE GASKET ASM DOOR - Part# WB35X29668 is a replacement part for a General Electric oven. It is a door gasket assembly that fits around the oven door to create an airtight seal. This helps to keep heat and moisture inside the oven, which helps to ensure that food cooks evenly and efficiently. The g...

GE HANDLE - Part# WB15K10100 is a replacement handle for a variety of GE ovens and ranges. It is made of durable stainless steel and is designed to fit perfectly in place of the original handle. The handle has a smooth finish and features a comfortable grip for easy use. It also includes mounting ...

GE LATCH ASSEMBLY - Part# WB02K10144 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the strike plate. The latch is a metal piece that has two hooks on either side that fit into the st...

GE Liner Asm Weld Door - Part# WB56X20537 is a replacement part for GE refrigerators. It is the liner assembly weld door that fits inside the refrigerator cabinet. This part helps to keep the cold air in and warm air out, helping to maintain a consistent temperature inside the refrigerator. The pa...

GE Overlay - Part# WB07X22807 is a replacement part for GE wall ovens. It is a black plastic overlay that covers the control panel of the oven. The overlay helps to protect the control panel from dirt, dust, and other debris. It also helps to keep the control panel looking neat and organized. The ...

GE Plastic Nail Part# WB02K10075 is a plastic nail designed for use in drywall and other construction applications. It is made of a durable plastic material that is resistant to corrosion and rust. The nail has a flat head and a sharp point, making it easy to drive into drywall or other materials....

GE Surface Unit ASM 6 - Part# WB30K10016 is a replacement part for GE electric cooktops. It is a 6-inch surface unit assembly that includes the surface element, the terminal block, and the mounting bracket. The surface element is a coil type with infinite heat settings and is rated at 2,400 watts....

GE Surface Unit Assembly 8" - Part# WB30K10018 is a replacement part for a GE range or cooktop. It is an 8-inch surface unit assembly that includes the burner, burner cap, and terminal block. This part is used to replace a damaged or malfunctioning surface unit on a GE range or cooktop. The termin...

GE TRIM POST RIGHT - Part# WB07X23481 is a replacement part for GE brand range hoods. It is a metal trim post that is used to secure the vent cover to the range hood. The trim post is made of stainless steel and measures approximately 4 inches in length. It has two holes on either side for mountin...

A Hinge Door (Part# WB10X21982) is a type of door that is attached to a frame or wall by two or more hinges. It is typically used in residential and commercial applications, such as interior and exterior doors. The hinge door is designed to open and close easily, while providing security and stabi...

Range drawer mounting bracket, Part# WB02K10398, is a metal bracket used to mount the range drawer to the range. It is typically located at the bottom of the range and is used to secure the drawer in place. The bracket consists of two pieces: a top piece that attaches to the range and a bottom pie...

Range Leveling Leg Part# WB02X29030 is a part used in many different types of ranges and ovens. It is a metal leg that helps to level the range or oven so that it sits evenly on the floor. The leg is adjustable, allowing you to raise or lower it as needed. This part is important for ensuring that ...

Range top (O/S1) - Part# WB62K10080 is a replacement part for a range top. It is designed to fit specific General Electric manufactured range models including JGBS20BEA1WH, JGBS20BEA2WH, JGBS20BEA3WH, JGBS20BEA4WH, and JGBS20BEA5WH. This part is made of porcelain-coated steel and is used to cover ...