Model: PVM9215SK1SS

GE AIR FILTER - Part# WB02X11534 is a replacement air filter for GE brand range hoods. It is designed to capture grease, smoke, and odors from the air while cooking. The filter is made of aluminum mesh and charcoal, which helps to absorb odors and trap grease particles. The filter measures approxi...

GE ASM HOOD DAMPER - Part# WB06X10920 is a replacement part for GE range hoods. It is a damper assembly that helps to regulate the air flow in the range hood. The damper assembly consists of a plastic frame, two metal arms, and a spring-loaded damper blade. The frame attaches to the range hood and...

GE BLADE FAN - Part# WB02X20626 is a replacement fan blade for GE microwave ovens. It is made of durable plastic and measures approximately 8 inches in diameter. The fan blade is designed to circulate air within the oven cavity, helping to evenly distribute heat and maintain a consistent temperatu...

GE BLADE STIRRER - Part# WB06X10888 is a replacement part for GE microwaves. It is a metal blade that fits into the center of the microwave turntable and helps to evenly distribute heat and cook food more evenly. The stirrer is made of stainless steel and has a plastic hub that fits into the cente...

The GE Charcoal Filter (Part# WB02X11544) is a replacement filter for GE over-the-range microwaves. It is designed to reduce odors and smoke from cooking, as well as other airborne particles. The filter is made of activated charcoal, which is a porous material that traps and absorbs odors and smok...

GE Cover Lamp (Part# WB06X10884) is a replacement part for GE microwave ovens. It is a light bulb cover that fits over the light bulb in the microwave. The cover helps to protect the light bulb from dust and other debris, as well as preventing it from being accidentally broken. The cover is made o...

GE COVER MGT is a replacement part for a range hood. It is a metal cover that fits over the fan motor and helps to protect it from dust and debris. The part number WB06X10894 is specific to GE brand range hoods. This cover helps to keep the motor clean and running efficiently, as well as preventin...

The GE END CAP DOOR (BLACK) - Part# WB06X10947 is a replacement part for GE microwaves. It is a black plastic end cap door that fits over the end of the microwave door frame. The end cap door helps to keep the microwave door closed and secure, and it also helps to protect the interior of the micro...

The GE GAS SENSOR - Part# WB24X799 is a gas sensor designed to detect the presence of combustible gases in residential and commercial buildings. It is designed to be used with GE’s range of gas detectors, and can be used to detect natural gas, propane, butane, methane, and other combustible gases....

GE Grille Vent SS (Part# WB07X26903) is a stainless steel grille vent designed for use with select GE over-the-range microwaves. This grille vent is used to provide ventilation for the microwave, allowing air to circulate and preventing the buildup of heat and odors. The grille vent is made of sta...

GE Halogen Lamp Part# WB25X10026 is a halogen light bulb designed for use in a variety of applications. This lamp is designed to provide bright, white light with minimal energy consumption. It features a G9 base and is rated for 120 volts and 25 watts. The bulb has an average life of 2,000 hours a...

GE HANDLE ASM ES - Part# WB15X26821 is a replacement handle assembly for General Electric (GE) brand ovens. This part is made of durable plastic and includes the handle, screws, and mounting bracket. It is designed to fit specific GE oven models and replaces the original handle that may have becom...

GE Hardware Assembly Part# WB06X10889 is a hardware assembly used in many GE microwave ovens. It is a metal bracket that attaches to the side of the oven and holds the turntable motor in place. The part includes two screws and two nuts for installation. This part is essential for proper operation ...

The GE Holder Halogen Lamp, Part# WB06X10882, is a replacement part for various GE microwaves. It is a halogen lamp that is used to provide illumination inside the microwave cavity. The lamp is held in place by a holder that attaches to the ceiling of the microwave. The holder has two metal prongs...

GE Holder-Wire Part# WB06X10819 is a replacement part for GE microwaves. It is a wire holder that holds the wire in place on the door of the microwave. The holder is made of plastic and has two prongs that fit into the holes on the door. The holder helps to keep the wires in place and prevents the...

The GE MAGNETRON THERMOSTAT - Part# WB24X26784 is a thermostat designed to control the temperature of a microwave oven. It is a replacement part for GE microwaves and is made to fit specific models. The thermostat monitors the temperature inside the oven and turns off the power when it reaches a c...

The GE Microwave LED Board - Part# WB02X26814 is a replacement part for certain GE microwaves. It is a circuit board that contains the LED lights that are used to indicate the status of the microwave, such as when it is in use or when it has finished cooking. The board also contains other componen...

GE Noise Filter Assm - Part# WB02X20624 is a noise filter assembly designed to reduce electrical interference from appliances and other electronic devices. It is used in conjunction with a power supply to reduce the amount of noise that can be heard from the appliance or device. The filter assembl...

GE Socket Lamp Part# WB08X10067 is a replacement socket lamp for GE microwave ovens. It is a genuine OEM part that is designed to fit specific GE models. The socket lamp is used to provide illumination inside the microwave oven when the door is opened. It has two prongs that fit into the socket on...

GE SPRING-BLADE (Part# WB09X10042) is a replacement part for a variety of GE appliances. It is a small, metal spring that is used to hold the door or lid of an appliance in place. The spring blade has two ends, one with a hook and the other with a loop. The hook end attaches to the appliance frame...

GE Thermo Switch Part# WB27X709 is a thermal switch designed to protect electric motors from overheating. It is a single-pole, double-throw (SPDT) switch that is normally open until the temperature reaches a preset level. When the temperature reaches the preset level, the switch closes and trips t...

The GE Thermostat Part# WB20X10060 is a digital thermostat designed to control the temperature in your home. It is a single-stage, non-programmable thermostat that can be used with most heating and cooling systems. The thermostat features a large, easy-to-read LCD display and simple push button co...

GE Thermostat Asm W/ Brkt - Part# WB24X26785 is a thermostat assembly with bracket manufactured by General Electric (GE). It is used in many GE appliances, including refrigerators, ovens, and dishwashers. The thermostat assembly includes a temperature sensor, a control knob, and a bracket for moun...

GE TRANS H.V - Part# WB27X10910 is a high voltage transformer manufactured by General Electric. It is used in many appliances such as microwaves, ovens, and ranges. This transformer is designed to convert the incoming line voltage from 120 volts to a higher voltage of up to 2700 volts. This higher...