Model: PSB2200NBB02

GE Board Latch RT (Part# WB06X10640) is a replacement part for GE microwave ovens. It is a small plastic latch that attaches to the control board and holds it in place. The latch is designed to keep the board secure and prevent it from becoming loose or damaged. The latch is made of durable plasti...

GE CERAMIC-TOP Part# WB36X10129 is a replacement part for a range top. It is made of ceramic and is designed to fit select GE ranges. The part includes the glass top, four mounting brackets, and screws for installation. The part measures approximately 21 inches by 24 inches and has four 6-inch bur...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range OVEN THERMOSTAT - Part# WB21X10148 is a replacement part for a range oven. It is designed to regulate the temperature of the oven by controlling the flow of electricity to the heating elements. The thermostat is connected to a temperatu...

GE General Electric RCA Hotpoint PartsIPS Kenmore Range Oven Cooktop Appliance Halogen Lamp 20W 120V - Part# WB25X10019 is a replacement halogen lamp for a range oven cooktop appliance. This lamp is 20 watts and 120 volts and has a part number of WB25X10019. It is designed to provide bright, white...

GE Holder ASM - Part# WB06X10646 is a part used in some GE microwaves. It is a holder assembly that is used to secure the turntable motor and drive shaft to the microwave chassis. The holder assembly includes two plastic clips, one metal clip, and four screws. The clips are used to secure the moto...

The GE Holder Cook Auxiliary - Part# WB06X10776 is a replacement part for GE microwaves. It is a metal bracket that holds the cooktop light bulb in place. The bracket is made of metal and has two mounting holes for attaching it to the microwave. It also has a small tab on the side that allows you ...

GE KNOB BLACK - Part# WB03X10131 is a replacement part for General Electric (GE) range/ovens. It is a black plastic knob with a chrome finish and is used to control the temperature of the oven. The knob has a D-shaped shaft and is used to replace the existing knob on the range/oven. This part is c...

GE MICA COVER - Part# WB06X10828 is a replacement part for GE microwave ovens. It is a flat, round piece of mica that fits over the top of the microwave cavity. The mica cover helps to protect the interior of the oven from heat and moisture, and also helps to reduce noise from the cooking process....

The GE Microwave Light Socket Hold - Part# WB06X10786 is a replacement part for a GE microwave. It is used to hold the light socket in place and provide electrical connection to the light bulb. The part is made of plastic and has two metal prongs that fit into the socket. It also has two mounting ...

GE Motor(Circ) Circulation - Part# WB26X10182 is a motor used in some GE dishwashers. It is responsible for circulating the water throughout the dishwasher during the wash cycle. The motor circulates the water by spinning a fan blade, which pushes the water through the spray arms and into the dish...

GE Ring Assembly - Part# WB06X10775 is a replacement part for GE microwave ovens. It is a metal ring that fits around the turntable motor shaft and helps to keep the turntable in place. The ring is made of stainless steel and has an outer diameter of 8-1/2 inches. It also has four mounting holes t...

The GE Shaft Turntable (Part# WB02X11360) is a replacement part for many GE microwave ovens. It is a circular metal plate that rotates inside the microwave oven to ensure that food is cooked evenly. The turntable sits on a motorized shaft and is driven by a belt connected to the motor. The turntab...

GE Smart Board Part# WB27X11019 is a smart board that is designed to provide a more interactive and intuitive user experience. It is an interactive whiteboard that can be used to create presentations, collaborate with colleagues, and share ideas. The board features a built-in camera, microphone, a...

GE TCO, OVEN CA - Part# WB21X10046 is a replacement part for a General Electric oven. It is the thermal cut-off (TCO) switch, which is a safety device that shuts off the oven if it overheats. The part number WB21X10046 is specific to General Electric ovens and is used to replace an existing TCO sw...

GE Tray Glass - Part# WB49X10166 is a replacement part for GE ovens. It is a glass tray that fits into the bottom of the oven and is used to catch any spills or splatters that may occur during cooking. The tray is made of tempered glass and measures approximately 16-3/4 inches by 12-1/2 inches. It...

GE TT MOTOR W/ GASKET - Part# WB26X10219 is a replacement part for GE brand ovens. It is a fan motor and gasket assembly that is used to circulate air within the oven cavity. The motor is made of durable plastic and metal components, and the gasket helps to ensure a tight seal between the motor an...

The Range Motor Bracket - Part# WB02X10542 is a replacement part for a range or oven. It is used to secure the motor to the oven frame. The bracket is made of metal and has two mounting holes on either side. It also has two slots for the motor wires to pass through. This part is compatible with ma...

The Surge Board, Part# WB07X11156, is a replacement part for General Electric (GE) microwaves. It is a circuit board that controls the power supply to the microwave. It monitors the voltage and current of the power supply and adjusts it accordingly to ensure that the microwave operates safely and ...

The Transformer High Voltage - Part# WB17X10030 is a high voltage transformer used in many different types of appliances. It is typically used to convert the incoming line voltage from the wall outlet into a lower voltage that can be used by the appliance. This transformer is designed to provide a...