Model: PS960BL2TS

Badge ASM - Part# WB02X29637 is a part used in some GE and Hotpoint brand ovens. It is a badge assembly that is used to identify the model and serial number of the oven. The badge assembly includes a metal plate with an adhesive backing, which is affixed to the front of the oven. The metal plate h...

The GE Board Sensor, Part# WB27X28659, is a replacement part for General Electric (GE) ovens. It is a temperature sensor that monitors the oven temperature and sends signals to the electronic control board to regulate the oven temperature. The sensor is typically located in the back wall of the ov...

GE Bracket Strain Relief Part# WB02T10542 is a bracket designed to provide strain relief for electrical cords and cables. It is used to secure the cord or cable to the wall or other surface, preventing it from being pulled out of the outlet or other connection point. The bracket is made of durable...

The GE Control Panel Trim Assembly (Part# WB07X29238) is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications. This part is used to replace the trim on the control panel of a variety of GE appliances, including some refrigerators, ranges, and microwa...

GE Cover Terminal Block - Part# WB02T10564 is a terminal block cover designed to fit over the terminals of a GE terminal block. It is made of durable plastic and is designed to protect the terminals from dust, dirt, and other contaminants. The cover has two tabs that snap into place to secure it i...

GE Element Haliant (Dual) - Part# WB30T10135 is a dual element haliant heating element designed for use in GE ovens. It is a two-piece unit that consists of an inner and outer element. The inner element is the main heating element and is used to heat the oven cavity. The outer element is a seconda...

GE Element Haliant 12 TRPL Part# WB30T10155 is a replacement heating element for GE electric ranges. It is a 12-inch triple haliant element that provides three different wattage levels to give you more control over your cooking. The element has a wattage of 2400/1800/1200 watts and features an adj...

GE Element Warmer Low Prf - Part# WB30X10035 is a replacement part for GE electric ranges. It is a heating element that provides low profile performance. This part is designed to fit into the oven cavity and provide even heat distribution throughout the oven. The element has a low profile design w...

GE GASKET OVN DR - Part# WB04T10076 is a replacement part for General Electric ovens. It is a gasket that seals the door of the oven to keep heat and smoke from escaping. The gasket is made of a durable, heat-resistant material and is designed to fit around the perimeter of the oven door. It helps...

GE Handle and End Cap Asm - Part# WB15X29162 is a replacement part for General Electric (GE) brand microwaves. It is a handle and end cap assembly that includes the handle, two end caps, and two screws. The handle is made of black plastic and measures approximately 8 inches long. The end caps are ...

GE INSERT PLUG - Part# WB01X29474 is a replacement part for GE range ovens. It is a plastic plug that fits into the back of the oven and helps to secure the wiring harness to the back of the oven. The plug is used to prevent any wires from becoming loose or disconnected from the oven. It also help...

GE LATCH ASM - Part# WB10X29243 is a replacement part for GE range ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the striker plate. The latch is mounted on the oven door and the striker plate is mounted on the o...

The GE Rangetop Bumper (Part# WB02X29562) is a replacement part for GE gas ranges. It is a black plastic bumper that is used to protect the range top from scratches and other damage. The bumper fits around the edge of the range top and is secured with screws. It helps to keep the range top looking...

GE Rear Vent Trim and Gasket AS - Part# WB07X29475 is a replacement part for General Electric (GE) range hoods. It is used to seal the rear vent of the range hood to the wall. The trim and gasket are made of durable plastic and are designed to fit most GE range hoods. The trim is easy to install a...

The GE SCR 6-32 TR3 PNT 1.405 SCREW - Part# WB01T10137 is a self-tapping screw manufactured by General Electric. It is a 6-32 thread size, with a trilobular thread form and a 1.405 pitch. The screw is made of steel and has a black oxide finish for corrosion resistance. It has a pan head style with...

GE SPACER DOOR - Part# WB02X25272 is a replacement part for GE refrigerators. It is a plastic spacer that fits between the refrigerator door and the cabinet frame. The spacer helps to ensure a proper fit and seal between the door and the frame, preventing air leaks and helping to keep food fresh. ...

HINGE ASM (LT) - Part# WB10T10105 is a left-hand hinge assembly for a range or oven. It is made of metal and plastic and includes the mounting screws. The hinge is designed to provide support for the door of the range or oven, allowing it to open and close smoothly. The hinge also helps to keep th...

HINGE ASM (RT) - Part# WB10T10104 is a right-hand hinge assembly for ovens. It is a replacement part manufactured by General Electric and is used to replace worn or broken hinges on ovens. The hinge assembly includes the hinge, mounting screws, and instructions for installation. The hinge is made ...

A range oven door gasket, also known as a door seal, is a rubber or silicone seal that fits around the perimeter of the oven door. It helps to keep heat and air inside the oven cavity, ensuring that food cooks evenly and efficiently. The gasket also helps to prevent hot air from escaping and poten...