Model: PJU25YGXAFSV

The GE Auger Helix Dispenser, Part# WR17X11479, is a replacement part for some GE refrigerator models. It is a plastic dispenser auger that helps to move ice cubes from the ice bin into the dispenser chute. The auger is made of durable plastic and has a helical shape that allows it to rotate and m...

The GE Bucket Ice Dispenser, Part# WR30X10095, is a convenient and easy-to-use ice dispenser designed for use with select GE refrigerators. This dispenser is designed to dispense cubed or crushed ice from the refrigerator's freezer compartment into a bucket located in the refrigerator's door. The ...

GE CAP FILTER BYPASS - Part# WR02X12343 is a part used in some GE refrigerator models to bypass the water filter. This part is used when the water filter needs to be replaced or when the water filter needs to be bypassed for any other reason. The GE CAP FILTER BYPASS - Part# WR02X12343 is a plasti...

The GE Compressor VCC3 REPL. KI - Part# WR87X10111 is a replacement compressor for GE refrigerators. It is a 1/6 HP, 115V, 60 Hz, single-phase motor with a maximum speed of 3100 RPM. The compressor has an oil capacity of 8 ounces and is designed to replace the original compressor in GE refrigerato...

GE COVER EVAP ASM - Part# WR17X12498 is a replacement part for GE refrigerators. It is the evaporator cover assembly, which is the plastic cover that fits over the evaporator coils in the freezer compartment of the refrigerator. The evaporator cover assembly helps to keep cold air in and warm air ...

The GE Filter Assembly and Tube (Part# WR17X12204) is a replacement part for refrigerators. It is a combination of a filter and tube assembly that helps to remove impurities from the water supply. The filter assembly consists of a filter, a plastic tube, and an o-ring. The filter is made of activa...

The GE Funnel Ice Dispenser (Part# WR17X12120) is a refrigerator accessory designed to dispense ice cubes from the freezer compartment of a refrigerator. It is made of durable plastic and has a funnel-shaped design that allows for easy access to the ice cubes. The dispenser is designed to fit most...

The GE Gasket Evap Cover - Part# WR14X10193 is a replacement part for refrigerators. It is a gasket that seals the evaporator cover in place and helps to keep the cold air inside the refrigerator. The gasket is made of durable rubber and is designed to fit specific models of GE refrigerators. This...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Refrigerator Drain Trough Assembly - Part# WR17X11843 is a part used in refrigerators to collect and drain away condensation from the refrigerator. It is located at the bottom of the refrigerator and collects any water that may accumulate from ...

GE GLIDE BUCKET LH - Part# WR72X10240 is a left-hand side bucket for a GE refrigerator. It is designed to fit into the refrigerator's left-hand side shelf and provide additional storage space. The bucket is made of durable plastic and features a slide-out design that allows for easy access to item...

GE Harness Inverter Comm - Part# WR23X10491 is a part used in some GE refrigerators. It is a wiring harness that connects the inverter board to the main control board. The inverter board controls the speed of the compressor motor, which helps regulate the temperature inside the refrigerator. The m...

The GE Jumper Tube Flow Meter - Part# WR02X13312 is a flow meter designed to measure the flow rate of liquids and gases. It is a simple, low-cost device that can be used in a variety of applications. The meter consists of two tubes connected by a jumper tube. The jumper tube contains an adjustable...

GE PAN MIDDLE CHILL ASM - Part# WR32X10572 is a replacement part for GE refrigerators. It is the middle chiller assembly, which is responsible for cooling the refrigerator's interior. The assembly includes a plastic pan, an evaporator fan motor, and a fan blade. The pan collects condensation from ...

GE Shield Light FF (Part# WR17X11713) is a replacement part for GE refrigerator models. It is a light shield that fits over the light bulb in the refrigerator to protect it from damage. The shield is made of plastic and has a clip on the back that attaches to the refrigerator wall. It helps to kee...

GE Tower Air FZ Lower is a part number WR17X10899 and is a replacement part for the GE refrigerator. It is the lower air tower that circulates air from the freezer to the refrigerator. This part helps to maintain an even temperature throughout the refrigerator and freezer compartments. The air tow...

GE Tube Drain - Part# WR02X11848 is a replacement part for a variety of GE refrigerators. It is a plastic tube that runs from the bottom of the refrigerator to the drain pan. The tube helps to collect and direct condensation away from the refrigerator and into the drain pan. This helps to keep you...