Model: PGS960SEL4SS

The GE Air Deviator (Part# WB02X28652) is a device designed to regulate the air flow in a room. It is typically used in heating and cooling systems to ensure that the air is evenly distributed throughout the space. The device works by diverting air from one area of the room to another, allowing fo...

The GE Base Burner Part# WB16X28656 is a replacement part for a variety of GE gas ranges. It is designed to replace the base burner on a range that has been damaged or worn out. The base burner is the part of the range that provides heat to the cooktop and oven. It consists of a metal plate with s...

The GE Board Sensor, Part# WB27X28659, is a replacement part for General Electric (GE) ovens. It is a temperature sensor that monitors the oven temperature and sends signals to the electronic control board to regulate the oven temperature. The sensor is typically located in the back wall of the ov...

GE CAP INNER - Part# WB16X28252 is a replacement part for General Electric (GE) ovens. It is an inner cap that fits inside the outer cap of the oven door. This part helps to keep the oven door sealed and secure when it is closed. The inner cap also helps to keep heat and moisture from escaping fro...

The GE Convection Element Part# WB44X10051 is a replacement part for GE ovens. It is a heating element that helps to circulate hot air throughout the oven cavity, allowing food to cook evenly and quickly. The element is made of metal and has two terminals at the back. It is approximately 16 inches...

GE FAN MOTOR CONVECT Part# WB26X28953 is a motor assembly for a convection fan in a range or oven. It is designed to move air around the oven cavity to ensure even cooking temperatures. The motor assembly includes the motor, fan blade, mounting bracket, and wiring harness. The motor is rated at 12...

The GE Frame Front Bumper (Part# WB02X28737) is a replacement part for select GE refrigerators. It is designed to protect the front of the refrigerator from damage caused by bumps and scrapes. The bumper is made of durable plastic and features a sleek, modern design that complements the look of yo...

GE Glass & Touch Board Asm - Part# WB56X28192 is a replacement part for General Electric (GE) ovens. It is a combination of a glass touch board and an assembly that is used to control the oven's functions. The touch board is responsible for sensing when the user touches the oven's control panel, a...

The GE Glowbar Igniter Part# WB13X25633 is a replacement part for a gas oven or range. It is an igniter that produces a spark to ignite the gas in the oven or range. The igniter is made of a metal alloy and has two ceramic glow bars that glow when heated by electricity. The igniter is connected to...

The GE Head Burner Part# WB16X28764 is a replacement part for a range or cooktop. It is designed to replace the head burner on a GE range or cooktop. The head burner is the main burner that provides heat to the cooking surface. It is made of durable stainless steel and has a black finish. The head...

The GE Igniter Glowbar (Part# WB28X28781) is a replacement part for gas ovens and ranges. It is a metal bar with a ceramic end that glows red when heated by an electric current. The glowbar ignites the gas in the oven, allowing it to heat up and cook food. The glowbar is connected to the oven's el...

The GE Ignition Module Part# WB13X24741 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic control board that controls the oven’s ignition system, which is responsible for lighting the oven’s burner. The module includes a spark igniter, spark electrode, and safety ...

The GE Inject Burner Mrhob Asm - Part# WB16X28867 is a replacement part for a variety of GE gas ranges. It is an injector burner assembly that includes the burner, the injector, and the mounting bracket. The injector burner assembly is responsible for providing a precise amount of fuel to the burn...

GE KNOB ASM - Part# WB03X28956 is a replacement part for General Electric (GE) range and ovens. It is a knob assembly that includes the knob, shaft, and clip. The knob is used to control the temperature of the oven or range. The clip attaches the knob to the shaft, which then connects to the tempe...

GE KNOB ASM - Part# WB03X28962 is a replacement part for a range oven. It is a black plastic knob assembly that is used to control the temperature of the oven. The knob has a metal shaft that fits into the back of the oven and connects to the temperature control mechanism. The knob also has a poin...

GE KNOB ASM - Part# WB03X28963 is a replacement part for General Electric (GE) range ovens. It is a black plastic knob assembly that includes the knob, shaft, and mounting hardware. The knob is used to control the temperature of the oven. It has a D-shaped shaft with two flat sides and two round s...

GE LATCH AUTOMATIC - Part# WB10X28794 is a replacement part for GE ovens. It is an automatic latch that helps to keep the oven door closed while the oven is in use. The latch is made of durable plastic and metal components and features a simple design that makes it easy to install. The latch works...

GE LATCH AUTOMATIC is a latch assembly designed to be used with GE range ovens. It is a replacement part for GE ovens and can be used to replace a broken or worn out latch. The part number WB10X28795 is the official part number for the GE LATCH AUTOMATIC. This latch assembly is made of durable pla...

The GE Machine Board with Frame (Part# WB27X29499) is a replacement part for various GE dryers. It is a printed circuit board assembly that controls the operation of the dryer. The board includes a frame that mounts to the dryer cabinet and holds the board in place. The board contains a variety of...

GE Oven Rack Part# WB48X21508 is a replacement oven rack for select GE ovens. This rack is made of heavy-duty steel and is designed to fit perfectly in your oven. It has a durable black finish and features a stop mechanism that prevents it from sliding out when you open the oven door. The rack als...

The GE Plunger Switch - Part# WB24X27550 is a replacement part for many GE ovens. It is a single-pole, double-throw (SPDT) switch that is used to control the oven's bake and broil functions. The plunger switch has two terminals and a plunger that can be pushed in or pulled out to change the positi...

The GE Range LP High Altitude Kit (Part# WB28X29255) is a kit designed to help ensure that your gas range functions properly at high altitudes. The kit includes a pressure regulator, a venturi tube, and an orifice. The pressure regulator helps to reduce the amount of gas pressure that is delivered...

The GE Range Ng High Altitude Kit - Part# WB28X29254 is a kit designed to help adjust the performance of a gas range in high altitude areas. The kit includes an air shutter, air shutter spring, and an instruction sheet. The air shutter is used to adjust the amount of air that enters the burner whe...

The GE Reversible Grill/Griddle - Part# WB31X24998 is a two-in-one cooking appliance that can be used as either a grill or a griddle. It features a reversible, non-stick cooking surface that can be flipped over to switch between the two functions. The griddle side has raised edges to contain food ...

The GE Safety Valve Dual - Part# WB21X28835 is a safety valve designed to prevent the over-pressurization of water heaters. It is a two-part valve that consists of an inlet and outlet. The inlet is connected to the water heater’s cold water supply line, while the outlet is connected to the hot wat...

GE Sensor Assembly - Part# WB24X25557 is a replacement part for General Electric (GE) brand dryers. It is a temperature sensor assembly that helps regulate the temperature of the dryer. The sensor assembly includes a thermistor, which is a type of resistor that changes its resistance with temperat...

The GE TRIM KIT - Part# WB07X28824 is a trim kit designed to provide a finished look to your GE built-in microwave oven. This trim kit is made of stainless steel and fits most GE built-in microwaves. It features an adjustable trim frame that allows you to customize the fit of the trim kit to your ...

The GE Tube Main Dual Valve - Part# WB28X28154 is a dual valve assembly designed for use with GE refrigerators. It is used to control the flow of water from the refrigerator's water supply line to the ice maker and water dispenser. The valve consists of two separate valves, one for the ice maker a...

The GE Valve Burner 270 Part# WB21X20470 is a replacement part for GE gas ranges. It is a gas valve burner that controls the flow of gas to the burner. The valve has two settings, high and low, and is adjustable to provide the desired flame size. The valve also has a safety feature that will shut ...

The GE Valve Burner 270 - Part# WB21X20612 is a replacement part for a variety of GE gas ranges. It is a gas valve burner that controls the flow of gas to the burners on the range. The valve burner has two settings, one for low flame and one for high flame. It is made of durable metal and plastic ...

The GE Valve Burner 270 Part# WB21X25979 is a replacement part for a variety of GE gas ranges. It is a single-valve burner that controls the flow of gas to the burner. The valve is designed to be used with a range of BTU ratings, from 5,000 to 12,000 BTU. It features an adjustable flame control kn...

GE Vent Trim - Part# WB07X28819 is a replacement part for GE range hoods. It is a trim piece that fits around the vent opening of the range hood. The trim piece is made of stainless steel and has a brushed finish. It measures approximately 4-1/2 inches wide by 3-1/2 inches high and has two mountin...

HINGE ASM LH (Part# WB10X28783) is a left-hand hinge assembly for General Electric (GE) and Hotpoint brand refrigerators. It is used to replace the existing left-hand hinge on the refrigerator door. The part number WB10X28783 is an OEM (Original Equipment Manufacturer) part, meaning it was made sp...

A Hinge Door, Part# WB10X26766, is a type of door that is attached to a frame by two or more hinges. This type of door is commonly used in residential and commercial applications. The hinges allow the door to swing open and closed, and they also provide support for the weight of the door. The hing...

The Receiver Hinge (Part# WB10X28563) is a part used in some General Electric (GE) and Hotpoint ovens. It is a replacement part for the hinge that connects the oven door to the oven frame. The hinge is made of metal and has two arms that attach to the oven door and frame. The arms are connected by...

The Receiver Hinge LH (Part# WB10X29636) is a part used in some General Electric (GE) ovens. It is the left-hand side of the receiver hinge assembly, which connects the oven door to the oven frame. The receiver hinge assembly consists of two parts: the left-hand side (LH) and right-hand side (RH)....

The Receiver Hinge RH (Part# WB10X29635) is a replacement part for a range or oven. It is the right-hand side of the hinge assembly and is used to attach the oven door to the range. The hinge consists of two parts: the receiver and the hinge arm. The receiver is mounted to the range frame and has ...