Model: PGS930EEL1ES

A door hinge, also known as a pin hinge, is a type of hardware used to attach two objects together while allowing them to rotate around a fixed axis. The most common type of door hinge is the butt hinge, which consists of two rectangular plates connected by a pin or rod. The plates are typically m...

The GE Air Deviator (Part# WB02X28652) is a device designed to regulate the air flow in a room. It is typically used in heating and cooling systems to ensure that the air is evenly distributed throughout the space. The device works by diverting air from one area of the room to another, allowing fo...

GE ASM CAP BURNER SMALL V2 (Part# WB16X28654) is a replacement part for General Electric (GE) gas ranges. It is a small burner cap that fits over the burner head to help protect it from spills and other debris. The cap also helps to evenly distribute the heat from the burner. This part is made of ...

The GE Base Burner Part# WB16X28656 is a replacement part for a variety of GE gas ranges. It is designed to replace the base burner on a range that has been damaged or worn out. The base burner is the part of the range that provides heat to the cooktop and oven. It consists of a metal plate with s...

GE Bracket Drawer Part# WB02X24742 is a replacement part for GE ovens. It is a bracket drawer that attaches to the bottom of the oven and holds the drawer in place. The bracket is made of metal and has two holes for mounting screws. This part is used to replace a worn or damaged bracket drawer on ...

The GE Broil Ignitor Glowbar (Part# WB13X24755) is a replacement part for many GE gas ovens. It is a glowbar ignitor, which is an electrical device that produces a spark to ignite the gas in the oven. The glowbar ignitor works by using electricity to heat up a small metal filament inside the ignit...

GE BUMPER - Part# WB02X24790 is a replacement part for GE range and ovens. It is a black plastic bumper that is used to protect the range or oven from damage when it is opened and closed. The bumper fits around the edge of the range or oven door and helps to reduce noise when the door is opened an...

GE Burner Bake Part# WB16X28250 is a replacement part for GE ovens. It is a bake element that is used to heat the oven cavity. The element is made of metal and has two terminals at the back. It measures approximately 16 inches wide by 28 inches long and has a wattage rating of 2,500 watts. This pa...

The GE Burner Small V2 - Part# WB16X24721 is a replacement part for a variety of GE gas ranges. It is designed to replace the small burner on the range and is made of durable metal construction. The burner has a total of four ports, two for the flame and two for the air intake. The ports are desig...

The GE Burner XL V2 (Part# WB16X24722) is a replacement burner for select GE gas ranges. It is designed to replace the original burner on the range and features a durable construction that is built to last. The burner has an adjustable flame control knob that allows you to adjust the flame size fo...

GE CAP INNER - Part# WB16X28252 is a replacement part for General Electric (GE) ovens. It is an inner cap that fits inside the outer cap of the oven door. This part helps to keep the oven door sealed and secure when it is closed. The inner cap also helps to keep heat and moisture from escaping fro...

GE CKT SCREW - Part# WB01X24735 is a genuine OEM (Original Equipment Manufacturer) replacement part for General Electric brand appliances. It is a screw used to secure the circuit board to the frame of the appliance. This part is made of metal and is approximately 1/2 inch in length. It has a Phil...

The GE Convection Element Part# WB44X10051 is a replacement part for GE ovens. It is a heating element that helps to circulate hot air throughout the oven cavity, allowing food to cook evenly and quickly. The element is made of metal and has two terminals at the back. It is approximately 16 inches...

GE Crystal Window is a part number WB57K10174, which is a window sash replacement kit. This kit includes all the necessary components to replace a broken or damaged window sash. The kit includes two vinyl-clad frames, two jamb liners, two sash locks, one tilt latch, one balance shoe, and installat...

GE FAN MOTOR CONVECT Part# WB26X28953 is a motor assembly for a convection fan in a range or oven. It is designed to move air around the oven cavity to ensure even cooking temperatures. The motor assembly includes the motor, fan blade, mounting bracket, and wiring harness. The motor is rated at 12...

The GE Frame Front Bumper (Part# WB02X28738) is a replacement part for select GE dishwashers. It is made of durable plastic and is designed to fit the front of the dishwasher frame. The bumper helps protect the dishwasher from damage caused by accidental bumps or scrapes. It also helps keep the di...

GE GASKET OVEN ASM - Part# WB32K10052 is a replacement part for GE ovens. It is a gasket that seals the oven door to the oven frame. The gasket helps to keep heat and moisture inside the oven, while also preventing air from entering the oven cavity. This part is made of durable materials and is de...

GE Gasket Oven Light - Part# WB32K10044 is a replacement part for GE ovens. It is a gasket that fits around the oven light bulb to keep it secure and prevent heat from escaping. The gasket is made of high-temperature silicone and is designed to fit all GE ovens. It helps to keep the oven light in ...

GE GLASS & TOUCH BOARD ASSM - Part# WB56X28190 is a replacement part for General Electric (GE) ovens. It is a combination of a glass touch board and an assembly that connects the board to the oven. The glass touch board is the user interface for the oven, allowing users to control the temperature,...

GE Handle and End Cap Asm - Part# WB15X27280 is a replacement part for General Electric (GE) brand dishwashers. This part is used to replace the handle and end cap assembly on the dishwasher door. The handle and end cap assembly includes the handle, end caps, screws, and other necessary hardware. ...

The GE Head Burner Part# WB16X28764 is a replacement part for a range or cooktop. It is designed to replace the head burner on a GE range or cooktop. The head burner is the main burner that provides heat to the cooking surface. It is made of durable stainless steel and has a black finish. The head...

The GE Igniter Glowbar (Part# WB13X25500) is a replacement part for many GE gas ovens and ranges. It is a metal bar with a ceramic coating that glows red when heated by an electric current. The glowbar ignites the gas in the oven, allowing it to heat up and cook food. The glowbar is an essential p...

The GE Inject Burner Mrhob Asm - Part# WB16X28867 is a replacement part for a variety of GE gas ranges. It is an injector burner assembly that includes the burner, the injector, and the mounting bracket. The injector burner assembly is responsible for providing a precise amount of fuel to the burn...

GE KNOB ASM - Part# WB03X28956 is a replacement part for General Electric (GE) range and ovens. It is a knob assembly that includes the knob, shaft, and clip. The knob is used to control the temperature of the oven or range. The clip attaches the knob to the shaft, which then connects to the tempe...

GE KNOB ASM - Part# WB03X28962 is a replacement part for a range oven. It is a black plastic knob assembly that is used to control the temperature of the oven. The knob has a metal shaft that fits into the back of the oven and connects to the temperature control mechanism. The knob also has a poin...

GE KNOB ASM - Part# WB03X28963 is a replacement part for General Electric (GE) range ovens. It is a black plastic knob assembly that includes the knob, shaft, and mounting hardware. The knob is used to control the temperature of the oven. It has a D-shaped shaft with two flat sides and two round s...

GE Lamp Insulation Part# WB02K10349 is a high-quality insulation material designed to protect lamps from heat and electrical shock. It is made of a flexible, flame-retardant material that can be easily cut to fit any lamp size. The insulation is UL listed and meets all safety standards for use in ...

GE LATCH AUTOMATIC - Part# WB10X28793 is a latch assembly designed for use with select GE and Hotpoint ovens. This latch assembly is used to secure the oven door in place when it is closed. It consists of a metal latch, spring, and two plastic pieces that fit into the oven door frame. The latch is...

The GE Medium Burner - Part# WB16X24724 is a replacement part for a variety of GE and Hotpoint gas ranges. This medium burner is designed to provide an even heat distribution across the cooking surface. It features a durable porcelain-enameled steel construction and includes the mounting hardware ...

GE Oven Rack Part# WB48X21508 is a replacement oven rack for select GE ovens. This rack is made of heavy-duty steel and is designed to fit perfectly in your oven. It has a durable black finish and features a stop mechanism that prevents it from sliding out when you open the oven door. The rack als...

The GE Reversible Grill/Griddle - Part# WB31X24998 is a two-in-one cooking appliance that can be used as either a grill or a griddle. It features a reversible, non-stick cooking surface that can be flipped over to switch between the two functions. The griddle side has raised edges to contain food ...

The GE RF Burner Jet with Electrode (Part# WB02X24727) is a replacement part for GE gas ranges. It is a burner jet that uses radio frequency (RF) energy to ignite the gas. The RF burner jet has an electrode that is used to detect the presence of a flame and shut off the gas if the flame goes out. ...

GE SCREW - Part# WB1K21 is a type of screw manufactured by General Electric. It is a self-tapping screw with a #2 Phillips head and is made of steel. The screw has a thread diameter of 0.138 inches and a thread pitch of 0.062 inches. It has an overall length of 1 inch and is zinc plated for corros...

GE SCREW 8-18 AB TRPO 3/8 SS - Part# WB01K10086 is a stainless steel screw manufactured by General Electric. It is an 8-18 AB thread size, with a 3/8 inch length and a TRPO (triple-start) thread pattern. The part number for this screw is WB01K10086. This screw is designed for use in a variety of a...

GE Sensor Assembly - Part# WB24X25557 is a replacement part for General Electric (GE) brand dryers. It is a temperature sensor assembly that helps regulate the temperature of the dryer. The sensor assembly includes a thermistor, which is a type of resistor that changes its resistance with temperat...

The GE TRIM KIT - Part# WB07X28825 is a trim kit designed to fit certain GE microwave ovens. It is used to give the microwave a built-in look when installed in a wall or cabinet. The trim kit includes two side panels, a top panel, and mounting hardware. The side panels are made of stainless steel ...

The GE Tube Main Dual Valve - Part# WB28X28154 is a dual valve assembly designed for use with GE refrigerators. It is used to control the flow of water from the refrigerator's water supply line to the ice maker and water dispenser. The valve consists of two separate valves, one for the ice maker a...

The GE Valve Burner 270 Part# WB21X20470 is a replacement part for GE gas ranges. It is a gas valve burner that controls the flow of gas to the burner. The valve has two settings, high and low, and is adjustable to provide the desired flame size. The valve also has a safety feature that will shut ...

The GE Valve Burner 270 - Part# WB21X20612 is a replacement part for a variety of GE gas ranges. It is a gas valve burner that controls the flow of gas to the burners on the range. The valve burner has two settings, one for low flame and one for high flame. It is made of durable metal and plastic ...

The GE Valve Burner 270 Part# WB21X25979 is a replacement part for a variety of GE gas ranges. It is a single-valve burner that controls the flow of gas to the burner. The valve is designed to be used with a range of BTU ratings, from 5,000 to 12,000 BTU. It features an adjustable flame control kn...

GE Vent Trim - Part# WB07X28819 is a replacement part for GE range hoods. It is a trim piece that fits around the vent opening of the range hood. The trim piece is made of stainless steel and has a brushed finish. It measures approximately 4-1/2 inches wide by 3-1/2 inches high and has two mountin...

Range Door Barrier Part# WB07X28885 is a replacement part for many GE and Hotpoint ovens. It is a metal strip that runs along the top of the oven door and helps to keep the door closed. The barrier helps to keep heat from escaping when the oven is in use, and also helps to prevent hot air from ent...

The Range Inject Small - Part# WB02X24728 is a small injector used to deliver a precise amount of fuel to the range burner. It is designed to be used with select GE and Hotpoint ranges. This injector is responsible for providing the correct amount of fuel to the burner, ensuring that it operates a...

Range Light Cover (Part# WB08K10018) is a replacement part for GE range hoods. It is a plastic cover that fits over the light bulb in the range hood. The cover helps to protect the light bulb from dust and debris, as well as providing a decorative touch to the range hood. The cover is designed to ...

The Range Receiver Hinge (Part# WB10X25602) is a replacement part for a range. It is used to connect the door of the range to the body of the range. The hinge is made of metal and has two parts: a receiver and a hinge. The receiver is mounted on the body of the range and the hinge is mounted on th...