Model: PGB960SEJ1SS

GE Backguard Range - Part# WB36X24974 is a range backguard designed to fit select GE ranges. It is made of stainless steel and features a sleek, modern design. The backguard is designed to protect the wall behind the range from splatters and spills while cooking. It also helps to keep the area aro...

GE BUMPER - Part# WB02K10171 is a replacement part for GE ovens. It is a black plastic bumper that is used to protect the oven door from damage when it is opened and closed. The bumper is designed to fit on the bottom of the oven door and has two mounting holes for easy installation. The bumper me...

GE BUMPER - Part# WB02X24790 is a replacement part for GE range and ovens. It is a black plastic bumper that is used to protect the range or oven from damage when it is opened and closed. The bumper fits around the edge of the range or oven door and helps to reduce noise when the door is opened an...

The GE Burner Small V2 - Part# WB16X24721 is a replacement part for a variety of GE gas ranges. It is designed to replace the small burner on the range and is made of durable metal construction. The burner has a total of four ports, two for the flame and two for the air intake. The ports are desig...

The GE Burner XL V2 (Part# WB16X24722) is a replacement burner for select GE gas ranges. It is designed to replace the original burner on the range and features a durable construction that is built to last. The burner has an adjustable flame control knob that allows you to adjust the flame size fo...

GE Central Grate Part# WB31X24737 is a replacement part for GE gas ranges. It is a heavy-duty cast iron grate that sits on top of the burner and provides a stable cooking surface. The grate is designed to evenly distribute heat across the entire cooking surface, allowing for more even cooking resu...

GE CKT SCREW - Part# WB01X24735 is a genuine OEM (Original Equipment Manufacturer) replacement part for General Electric brand appliances. It is a screw used to secure the circuit board to the frame of the appliance. This part is made of metal and is approximately 1/2 inch in length. It has a Phil...

The GE Clip Igniter V2 (Part# WB02X24976) is a replacement part for gas ovens and ranges. It is a clip-on igniter that clips onto the burner valve stem and ignites the gas when the oven or range is turned on. The Clip Igniter V2 has a ceramic-insulated wire with a nickel-plated steel clip that att...

GE CLIP-WIRE Part# WB02X21679 is a replacement part for General Electric (GE) range/stove/ovens. It is a wire clip that is used to secure the wires in place. The clip is made of metal and has two prongs that are used to attach the wires to the back of the range/stove/oven. This part is used to ens...

GE Gasket Oven Light - Part# WB32K10044 is a replacement part for GE ovens. It is a gasket that fits around the oven light bulb to keep it secure and prevent heat from escaping. The gasket is made of high-temperature silicone and is designed to fit all GE ovens. It helps to keep the oven light in ...

) GE Glass Panel Door Asm (Dropshi - Part# WB56X24968) is a replacement part for GE refrigerators. It is a glass panel door assembly that includes the frame, hinges, and handle. The frame is made of stainless steel and the handle is made of plastic. The door has a clear glass panel that allows you ...

The GE Glowbar Igniter Part# WB13X25633 is a replacement part for a gas oven or range. It is an igniter that produces a spark to ignite the gas in the oven or range. The igniter is made of a metal alloy and has two ceramic glow bars that glow when heated by electricity. The igniter is connected to...

The GE Grate Assembly - Part# WB31X24736 is a replacement part for GE gas ranges. It is made of stainless steel and includes two grates, four grate feet, and four screws. The grates are designed to fit over the burners on the range and provide a stable cooking surface. The grate feet help to keep ...

GE Handle and End Cap Assembly (Part# WB15T10222) is a replacement part for GE range ovens. It is a black plastic handle and end cap assembly that is used to open and close the oven door. The handle has a textured finish for easy gripping, and the end cap snaps into place to secure the handle in p...

The GE Igniter Glowbar (Part# WB13X24924) is a replacement part for a gas oven. It is an igniter that helps to ignite the gas in the oven, allowing it to heat up and cook food. The glowbar is made of a metal alloy that glows when heated, which is what ignites the gas. The glowbar has two electrica...

GE KNOB ASM - Part# WB03X24991 is a replacement part for General Electric (GE) range ovens. It is a knob assembly that includes the knob, shaft, and clip. The knob is used to control the temperature of the oven. It has a black finish and is made of plastic. The shaft is made of metal and connects ...

GE LATCH AUTOMATIC - Part# WB10X24930 is a replacement part for GE ovens. It is an automatic latch that helps to keep the oven door closed and secure during cooking. The latch is made of durable plastic and metal components, and it is designed to fit most GE oven models. The latch features a sprin...

The GE Medium Burner - Part# WB16X24724 is a replacement part for a variety of GE and Hotpoint gas ranges. This medium burner is designed to provide an even heat distribution across the cooking surface. It features a durable porcelain-enameled steel construction and includes the mounting hardware ...

The GE Orifice Holder RF Part# WB28X24761 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two screws that secure it to the burner. It also has an O-ring t...

The GE Orifice Holder RR Part# WB28X24763 is a replacement part for GE gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas valve and the burner. The orifice holder is made of metal and has two screws that secure it to the gas valve. It also has a sma...

GE Orifice Spud Part# WB28K10107 is a replacement part for a gas range. It is used to regulate the flow of gas from the burner to the oven. The spud is made of metal and has a threaded end that screws into the burner orifice. It also has a hole in the center that allows gas to pass through. The si...

GE Orifice Spud Part# WB28K10834 is a replacement part for GE gas ranges. It is an orifice spud, which is a metal tube that connects the gas burner to the gas supply line. The orifice spud controls the flow of gas to the burner and helps regulate the flame size. This part is made of metal and has ...

GE Oven Rack Part# WB48X21508 is a replacement oven rack for select GE ovens. This rack is made of heavy-duty steel and is designed to fit perfectly in your oven. It has a durable black finish and features a stop mechanism that prevents it from sliding out when you open the oven door. The rack als...

The GE Reversible Grill/Griddle - Part# WB31X24998 is a two-in-one cooking appliance that can be used as either a grill or a griddle. It features a reversible, non-stick cooking surface that can be flipped over to switch between the two functions. The griddle side has raised edges to contain food ...

The GE RF Burner Jet with Electrode (Part# WB02X24727) is a replacement part for GE gas ranges. It is a burner jet that uses radio frequency (RF) energy to ignite the gas. The RF burner jet has an electrode that is used to detect the presence of a flame and shut off the gas if the flame goes out. ...

GE SCREW 10-16 - Part# WB01K10116 is a 10-16 x 1/2 inch self-tapping screw manufactured by General Electric. It is made of steel and has a zinc plated finish. This screw is used to secure parts together in many different applications, such as securing panels, cabinets, and other items. The head of...

GE Sensor Assembly (Part# WB24X25056) is a replacement part for GE ovens. It is a temperature sensor assembly that helps to regulate the temperature inside the oven. The sensor assembly includes a thermistor, which is a temperature-sensitive resistor that changes its resistance with changes in tem...

GE Sensor Assembly - Part# WB24X25557 is a replacement part for General Electric (GE) brand dryers. It is a temperature sensor assembly that helps regulate the temperature of the dryer. The sensor assembly includes a thermistor, which is a type of resistor that changes its resistance with temperat...

GE Tube Upper Bake Supply - Part# WB28X20758 is a replacement part for GE ovens. It is the upper bake element supply tube that connects the bake element to the oven's power source. This part is made of metal and is approximately 16 inches long. It has two terminals at one end and a single terminal...

The GE Valve Burner 270 Part# WB21X20470 is a replacement part for GE gas ranges. It is a gas valve burner that controls the flow of gas to the burner. The valve has two settings, high and low, and is adjustable to provide the desired flame size. The valve also has a safety feature that will shut ...

The GE Valve Burner 270 - Part# WB21X20612 is a replacement part for a variety of GE gas ranges. It is a gas valve burner that controls the flow of gas to the burners on the range. The valve burner has two settings, one for low flame and one for high flame. It is made of durable metal and plastic ...

The GE Valve Burner 270 Part# WB21X25979 is a replacement part for a variety of GE gas ranges. It is a single-valve burner that controls the flow of gas to the burner. The valve is designed to be used with a range of BTU ratings, from 5,000 to 12,000 BTU. It features an adjustable flame control kn...

HINGE ASM - Part# WB10K10031 is a replacement part for a range of ovens and cooktops. It is a hinge assembly that connects the oven door to the oven frame. The hinge assembly includes two hinges, one on each side of the door, and a mounting bracket. The hinges are made of metal and have an adjusta...

The Range Inject Small - Part# WB02X24728 is a small injector used to deliver a precise amount of fuel to the range burner. It is designed to be used with select GE and Hotpoint ranges. This injector is responsible for providing the correct amount of fuel to the burner, ensuring that it operates a...

The Range Knob - Stainless Steel - Part# WB03X24988 is a replacement part for a range or stove. It is made of stainless steel and has a black plastic knob on the top. The knob is used to control the temperature of the range or stove. It has two settings, one for low heat and one for high heat. The...

Range Light Cover (Part# WB08K10018) is a replacement part for GE range hoods. It is a plastic cover that fits over the light bulb in the range hood. The cover helps to protect the light bulb from dust and debris, as well as providing a decorative touch to the range hood. The cover is designed to ...

The Range Side Manifold Bracket (Part# WB02X24939) is a part used in some GE and Hotpoint range models. It is a metal bracket that attaches to the side of the range and holds the manifold assembly in place. The manifold assembly is responsible for controlling the gas flow to the burners. The brack...