Model: PGB960BEJ2TS

Badge ASM - Part# WB02X29637 is a part used in some GE and Hotpoint brand ovens. It is a badge assembly that is used to identify the model and serial number of the oven. The badge assembly includes a metal plate with an adhesive backing, which is affixed to the front of the oven. The metal plate h...

GE ASM CAP BURNER SMALL V2 (Part# WB16X28654) is a replacement part for General Electric (GE) gas ranges. It is a small burner cap that fits over the burner head to help protect it from spills and other debris. The cap also helps to evenly distribute the heat from the burner. This part is made of ...

GE Central Grate Part# WB31X24737 is a replacement part for GE gas ranges. It is a heavy-duty cast iron grate that sits on top of the burner and provides a stable cooking surface. The grate is designed to evenly distribute heat across the entire cooking surface, allowing for more even cooking resu...

GE CLIP RANGETOP - Part# WB02X26569 is a replacement part for GE range tops. It is a metal clip that attaches to the back of the range top and holds it in place. The clip is made of stainless steel and has two holes for screws to secure it to the range top. This part is used on all GE ranges, incl...

GE CLIP-WIRE Part# WB02X21679 is a replacement part for General Electric (GE) range/stove/ovens. It is a wire clip that is used to secure the wires in place. The clip is made of metal and has two prongs that are used to attach the wires to the back of the range/stove/oven. This part is used to ens...

GE Cover Vent Trim DD (Part# WB07X29140) is a replacement part for GE brand range hoods. It is a decorative cover that fits over the vent opening on the range hood. The cover is made of durable plastic and comes in a white finish. It is designed to fit GE brand range hoods with a width of 30 inche...

GE END SUPPORT DD - Part# WB07X29143 is a part for a General Electric microwave oven. It is an end support for the turntable tray in the oven. This part is made of metal and is used to hold the turntable tray in place. It has two mounting holes on either side and comes with two screws for installa...

GE END SUPPORT DD - Part# WB07X29144 is a part used in some GE ovens. It is an end support for the oven door. This part helps to keep the door in place and provide stability when opening and closing the oven door. The part is made of metal and is designed to fit into the existing holes on the oven...

The GE Frame Front Bumper (Part# WB02X28737) is a replacement part for select GE refrigerators. It is designed to protect the front of the refrigerator from damage caused by bumps and scrapes. The bumper is made of durable plastic and features a sleek, modern design that complements the look of yo...

The GE Glowbar Igniter Part# WB13X25633 is a replacement part for a gas oven or range. It is an igniter that produces a spark to ignite the gas in the oven or range. The igniter is made of a metal alloy and has two ceramic glow bars that glow when heated by electricity. The igniter is connected to...

The GE Grate Assembly - Part# WB31X24736 is a replacement part for GE gas ranges. It is made of stainless steel and includes two grates, four grate feet, and four screws. The grates are designed to fit over the burners on the range and provide a stable cooking surface. The grate feet help to keep ...

The GE Igniter Glowbar (Part# WB13X24924) is a replacement part for a gas oven. It is an igniter that helps to ignite the gas in the oven, allowing it to heat up and cook food. The glowbar is made of a metal alloy that glows when heated, which is what ignites the gas. The glowbar has two electrica...

GE Kit Nat Conversion Asm - Part# WB49X26122 is a conversion kit assembly designed for use with select GE gas ranges. This kit allows the range to be converted from natural gas to liquid propane. It includes all the necessary components to make the conversion, including a regulator, orifice, hose,...

GE LATCH AUTOMATIC - Part# WB10X24930 is a replacement part for GE ovens. It is an automatic latch that helps to keep the oven door closed and secure during cooking. The latch is made of durable plastic and metal components, and it is designed to fit most GE oven models. The latch features a sprin...

The GE Orifice Holder RF Part# WB28X24761 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two screws that secure it to the burner. It also has an O-ring t...

The GE Orifice Holder RR Part# WB28X24763 is a replacement part for GE gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas valve and the burner. The orifice holder is made of metal and has two screws that secure it to the gas valve. It also has a sma...

GE Orifice Spud Part# WB28K10107 is a replacement part for a gas range. It is used to regulate the flow of gas from the burner to the oven. The spud is made of metal and has a threaded end that screws into the burner orifice. It also has a hole in the center that allows gas to pass through. The si...

GE Oven Rack Part# WB48X21508 is a replacement oven rack for select GE ovens. This rack is made of heavy-duty steel and is designed to fit perfectly in your oven. It has a durable black finish and features a stop mechanism that prevents it from sliding out when you open the oven door. The rack als...

GE Panel Side - Part# WB56X29670 is a replacement part for GE refrigerator models. It is a white plastic panel that fits on the side of the refrigerator and helps to keep the temperature consistent inside the appliance. The panel also helps to reduce noise from the refrigerator's compressor. This ...

The GE Plunger Switch - Part# WB24X27550 is a replacement part for many GE ovens. It is a single-pole, double-throw (SPDT) switch that is used to control the oven's bake and broil functions. The plunger switch has two terminals and a plunger that can be pushed in or pulled out to change the positi...

The GE Reversible Grill/Griddle - Part# WB31X24998 is a two-in-one cooking appliance that can be used as either a grill or a griddle. It features a reversible, non-stick cooking surface that can be flipped over to switch between the two functions. The griddle side has raised edges to contain food ...

GE SCREW 10-16 - Part# WB01K10116 is a 10-16 x 1/2 inch self-tapping screw manufactured by General Electric. It is made of steel and has a zinc plated finish. This screw is used to secure parts together in many different applications, such as securing panels, cabinets, and other items. The head of...

GE Sensor Assembly (Part# WB24X25056) is a replacement part for GE ovens. It is a temperature sensor assembly that helps to regulate the temperature inside the oven. The sensor assembly includes a thermistor, which is a temperature-sensitive resistor that changes its resistance with changes in tem...

GE Sensor Assembly - Part# WB24X25557 is a replacement part for General Electric (GE) brand dryers. It is a temperature sensor assembly that helps regulate the temperature of the dryer. The sensor assembly includes a thermistor, which is a type of resistor that changes its resistance with temperat...

GE Tube Upper Bake Supply - Part# WB28X20758 is a replacement part for GE ovens. It is the upper bake element supply tube that connects the bake element to the oven's power source. This part is made of metal and is approximately 16 inches long. It has two terminals at one end and a single terminal...

The GE Valve Burner 270 Part# WB21X20470 is a replacement part for GE gas ranges. It is a gas valve burner that controls the flow of gas to the burner. The valve has two settings, high and low, and is adjustable to provide the desired flame size. The valve also has a safety feature that will shut ...

The GE Valve Burner 270 - Part# WB21X20612 is a replacement part for a variety of GE gas ranges. It is a gas valve burner that controls the flow of gas to the burners on the range. The valve burner has two settings, one for low flame and one for high flame. It is made of durable metal and plastic ...

The GE Valve Burner 270 Part# WB21X25979 is a replacement part for a variety of GE gas ranges. It is a single-valve burner that controls the flow of gas to the burner. The valve is designed to be used with a range of BTU ratings, from 5,000 to 12,000 BTU. It features an adjustable flame control kn...

HINGE ASM RH (Right Hand) Part# WB10X28782 is a replacement part for a range of General Electric (GE) ovens. It is the right hand side hinge assembly for the oven door. This part includes the hinge, mounting screws, and other necessary hardware. The hinge is made of metal and plastic and is design...

A Hinge Door, Part# WB10X26766, is a type of door that is attached to a frame by two or more hinges. This type of door is commonly used in residential and commercial applications. The hinges allow the door to swing open and closed, and they also provide support for the weight of the door. The hing...

The Range Side Manifold Bracket (Part# WB02X24939) is a part used in some GE and Hotpoint range models. It is a metal bracket that attaches to the side of the range and holds the manifold assembly in place. The manifold assembly is responsible for controlling the gas flow to the burners. The brack...

The Receiver Hinge (Part# WB10X28563) is a part used in some General Electric (GE) and Hotpoint ovens. It is a replacement part for the hinge that connects the oven door to the oven frame. The hinge is made of metal and has two arms that attach to the oven door and frame. The arms are connected by...

The Receiver Hinge LH (Part# WB10X29636) is a part used in some General Electric (GE) ovens. It is the left-hand side of the receiver hinge assembly, which connects the oven door to the oven frame. The receiver hinge assembly consists of two parts: the left-hand side (LH) and right-hand side (RH)....

The Receiver Hinge RH (Part# WB10X29635) is a replacement part for a range or oven. It is the right-hand side of the hinge assembly and is used to attach the oven door to the range. The hinge consists of two parts: the receiver and the hinge arm. The receiver is mounted to the range frame and has ...