Model: PGB911BEJ3TS

Badge ASM - Part# WB02X29637 is a part used in some GE and Hotpoint brand ovens. It is a badge assembly that is used to identify the model and serial number of the oven. The badge assembly includes a metal plate with an adhesive backing, which is affixed to the front of the oven. The metal plate h...

A door hinge, also known as a pin hinge, is a type of hardware used to attach two objects together while allowing them to rotate around a fixed axis. The most common type of door hinge is the butt hinge, which consists of two rectangular plates connected by a pin or rod. The plates are typically m...

GE ASM CAP BURNER SMALL V2 (Part# WB16X28654) is a replacement part for General Electric (GE) gas ranges. It is a small burner cap that fits over the burner head to help protect it from spills and other debris. The cap also helps to evenly distribute the heat from the burner. This part is made of ...

GE Bracket Drawer Part# WB02X24742 is a replacement part for GE ovens. It is a bracket drawer that attaches to the bottom of the oven and holds the drawer in place. The bracket is made of metal and has two holes for mounting screws. This part is used to replace a worn or damaged bracket drawer on ...

The GE Broil Ignitor Glowbar (Part# WB13X24755) is a replacement part for many GE gas ovens. It is a glowbar ignitor, which is an electrical device that produces a spark to ignite the gas in the oven. The glowbar ignitor works by using electricity to heat up a small metal filament inside the ignit...

GE Burner Bake Part# WB16X20463 is a replacement part for GE ovens. It is a burner bake element that is used to heat the oven. The element is made of metal and has two terminals at the back that connect to the wiring harness. The element is designed to evenly distribute heat throughout the oven ca...

The GE Central Orifice Holder - Part# WB28X24762 is a replacement part for a range or cooktop. It is used to hold the orifice in place and secure it to the burner. The orifice is the small hole in the burner that allows gas to flow through and be ignited. This part is made of metal and is designed...

GE CLIP RANGETOP - Part# WB02X26569 is a replacement part for GE range tops. It is a metal clip that attaches to the back of the range top and holds it in place. The clip is made of stainless steel and has two holes for screws to secure it to the range top. This part is used on all GE ranges, incl...

GE Drawer Body Asm - Part# WB49X26422 is a replacement part for GE brand refrigerators. It is the drawer body assembly, which includes the frame and glides that support the refrigerator drawers. This part is used to replace a damaged or worn out drawer body assembly, allowing you to keep your refr...

GE Electrodes & Harness H.V - Part# WB18X26985 is a high voltage electrode and harness assembly for use in General Electric (GE) ovens. This part is used to connect the oven's heating elements to the power source. It includes two electrodes, two harnesses, and a high voltage connector. The electro...

GE END SUPPORT DD - Part# WB07X29143 is a part for a General Electric microwave oven. It is an end support for the turntable tray in the oven. This part is made of metal and is used to hold the turntable tray in place. It has two mounting holes on either side and comes with two screws for installa...

GE END SUPPORT DD - Part# WB07X29144 is a part used in some GE ovens. It is an end support for the oven door. This part helps to keep the door in place and provide stability when opening and closing the oven door. The part is made of metal and is designed to fit into the existing holes on the oven...

GE FAN MOTOR CONVECT Part# WB26X28953 is a motor assembly for a convection fan in a range or oven. It is designed to move air around the oven cavity to ensure even cooking temperatures. The motor assembly includes the motor, fan blade, mounting bracket, and wiring harness. The motor is rated at 12...

The GE Grate Assembly - Part# WB31X24736 is a replacement part for GE gas ranges. It is made of stainless steel and includes two grates, four grate feet, and four screws. The grates are designed to fit over the burners on the range and provide a stable cooking surface. The grate feet help to keep ...

The GE Igniter Glowbar (Part# WB13X25500) is a replacement part for many GE gas ovens and ranges. It is a metal bar with a ceramic coating that glows red when heated by an electric current. The glowbar ignites the gas in the oven, allowing it to heat up and cook food. The glowbar is an essential p...

The GE Ignition Module Part# WB13X24741 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic control board that controls the oven’s ignition system, which is responsible for lighting the oven’s burner. The module includes a spark igniter, spark electrode, and safety ...

GE LATCH AUTOMATIC - Part# WB10X24780 is a replacement part for General Electric (GE) ovens. It is an automatic latch that is used to secure the oven door in place. The latch is made of durable plastic and metal components and is designed to last for many years. It features a spring-loaded design ...

GE Manifold Tube Supply - Part# WB28X24772 is a replacement part for GE refrigerators. It is a tube that supplies water to the refrigerator's ice maker and water dispenser. The tube is made of plastic and measures approximately 4 feet in length. It has two fittings on either end, one for the water...

The GE Orifice Holder RF Part# WB28X24761 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two screws that secure it to the burner. It also has an O-ring t...

The GE Orifice Holder RR Part# WB28X24763 is a replacement part for GE gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas valve and the burner. The orifice holder is made of metal and has two screws that secure it to the gas valve. It also has a sma...

GE Panel Side - Part# WB56X29670 is a replacement part for GE refrigerator models. It is a white plastic panel that fits on the side of the refrigerator and helps to keep the temperature consistent inside the appliance. The panel also helps to reduce noise from the refrigerator's compressor. This ...

The GE Plunger Switch - Part# WB24X27550 is a replacement part for many GE ovens. It is a single-pole, double-throw (SPDT) switch that is used to control the oven's bake and broil functions. The plunger switch has two terminals and a plunger that can be pushed in or pulled out to change the positi...

The GE Range LP High Altitude Kit (Part# WB28X29255) is a kit designed to help ensure that your gas range functions properly at high altitudes. The kit includes a pressure regulator, a venturi tube, and an orifice. The pressure regulator helps to reduce the amount of gas pressure that is delivered...

The GE Range Ng High Altitude Kit - Part# WB28X29254 is a kit designed to help adjust the performance of a gas range in high altitude areas. The kit includes an air shutter, air shutter spring, and an instruction sheet. The air shutter is used to adjust the amount of air that enters the burner whe...

GE RC15 OVERLAY - Part# WB07X35081 is a replacement part for GE microwave ovens. It is an overlay panel that covers the control panel of the microwave. The overlay panel has a black finish and features printed graphics and text that allow users to easily identify the various functions of the micro...

The GE Reversible Grill/Griddle - Part# WB31X24998 is a two-in-one cooking appliance that can be used as either a grill or a griddle. It features a reversible, non-stick cooking surface that can be flipped over to switch between the two functions. The griddle side has raised edges to contain food ...

GE Sensor Assembly - Part# WB24X25557 is a replacement part for General Electric (GE) brand dryers. It is a temperature sensor assembly that helps regulate the temperature of the dryer. The sensor assembly includes a thermistor, which is a type of resistor that changes its resistance with temperat...

The GE Valve Burner 270 Part# WB21X20260 is a replacement part for GE gas ranges. It is a single-valve burner that is used to control the flow of gas to the burners on the range. The valve has two ports, one for the gas supply and one for the burner. The valve is designed to be adjustable so that ...

The GE Valve Burner 270 Part# WB21X20262 is a replacement part for GE gas ranges. It is a single-valve burner assembly that includes the valve, knob, and burner head. The valve controls the flow of gas to the burner head, which in turn produces heat for cooking. The knob allows you to adjust the f...

The GE Valve Burner 270 Part# WB21X20394 is a replacement part for a variety of GE gas ranges. It is a valve burner that controls the flow of gas to the burners on the range. The valve burner has two ports, one for the main burner and one for the pilot light. The valve burner is made of metal and ...

The GE Valve Burner 274 - Part# WB21X20261 is a replacement part for GE gas ranges. It is a gas valve burner assembly that includes the burner, the valve, and the igniter. The valve controls the flow of gas to the burner, while the igniter sparks to ignite the gas. This part is used to replace a f...

GE VALVE CONTROL ASM - Part# WB21X33225 is a replacement part for GE brand dishwashers. It is the valve control assembly, which is responsible for controlling the water flow into the dishwasher. The valve control assembly includes a solenoid valve, pressure switch, and timer. The solenoid valve op...

The Range Side Manifold Bracket (Part# WB02X24939) is a part used in some GE and Hotpoint range models. It is a metal bracket that attaches to the side of the range and holds the manifold assembly in place. The manifold assembly is responsible for controlling the gas flow to the burners. The brack...

The Receiver Hinge (Part# WB10X28563) is a part used in some General Electric (GE) and Hotpoint ovens. It is a replacement part for the hinge that connects the oven door to the oven frame. The hinge is made of metal and has two arms that attach to the oven door and frame. The arms are connected by...

RH Hinge (Part# WB10X25550) is a right-hand door hinge manufactured by General Electric. It is designed to be used on the right side of a door and is made of steel for durability. The hinge has two mounting holes and comes with screws for easy installation. The hinge has a maximum load capacity of...