Model: PFSF6PKXDBB

GE ASM TANK WATER - Part# WR17X12741 is a replacement water tank for select GE refrigerator models. This part is made of durable plastic and is designed to hold the water that is dispensed from the refrigerator. It includes a float switch, which helps to regulate the amount of water in the tank. T...

The GE ASM TEMP SENSOR - Part# WR23X10582 is a temperature sensor used in refrigerators and freezers. It is designed to detect the temperature inside the appliance and send a signal to the main control board. The main control board then uses this signal to adjust the cooling system accordingly. Th...

GE BIMETAL Part# WR02X12592 is a bimetallic thermostat used in refrigerators and freezers. It is a two-piece device consisting of a copper coil and a steel plate. The copper coil is connected to the refrigerator's temperature control knob, while the steel plate is connected to the refrigerator's e...

GE C-CLIP Part# WR02X12604 is a clip used to secure the condenser fan motor to the condenser fan motor bracket. It is made of plastic and is designed to fit a variety of GE refrigerator models. The clip has two prongs that fit into two holes in the bracket, and then the clip is snapped into place....

GE Defrost Heater - Part# WR51X10105 is a replacement part for GE refrigerator models. It is used to defrost the evaporator coils in the freezer section of the refrigerator. The heater is located behind the back wall of the freezer and is responsible for melting any ice that has built up on the ev...

The GE Defrost Heater FZ - Part# WR51X10104 is a replacement part for GE refrigerator models. It is used to help keep the evaporator coils from freezing up and preventing the refrigerator from cooling properly. The heater is made of a stainless steel sheath with a heating element inside. It is des...

The GE EMI Noise Filter (Part# WR62X10067) is a device designed to reduce electromagnetic interference (EMI) from appliances and other electronic devices. It works by filtering out unwanted frequencies and allowing only the desired frequencies to pass through. The filter is designed to be installe...

The GE Fixer Handle - Part# WR02X12621 is a replacement handle for GE refrigerators. It is used to replace the existing handle on the refrigerator door. The handle is made of durable plastic and features a white finish that will match most refrigerator models. The handle measures approximately 3 i...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Ice Maker Part# WR30X10131 is a replacement ice maker kit for select GE, Hotpoint, PartsIPS and Kenmore refrigerators. This kit includes the ice maker, mounting hardware, and installation instructions. The ice maker is designed to prod...

GE Heater Metal Sheath - Part# WR02X12603 is a replacement part for GE dryers. It is a metal sheath that surrounds the heating element in the dryer. The metal sheath helps to protect the heating element from damage and also helps to keep the heat inside the dryer. This part is made of durable meta...

The GE LED Light Board, Part# WR55X10765, is a replacement part for a variety of GE refrigerator models. It is a circuit board that controls the LED lights in the refrigerator. The board is responsible for powering the LED lights and controlling their brightness. It also monitors the temperature o...

GE Overload Part# WR08X10096 is a motor overload protector designed to protect motors from damage due to excessive current draw. It is designed to be used with GE electric motors and can be used in a variety of applications. The overload protector works by monitoring the current draw of the motor ...

GE PIN FRENCH SPRING - Part# WR02X12651 is a replacement part for GE French Door Refrigerators. It is a small plastic pin that fits into the door hinge and helps to keep the door closed. The pin is made of durable plastic and is designed to last for many years. It is an OEM (Original Equipment Man...

GE Rear Wheel - Part# WR02X13137 is a replacement wheel for GE brand dryers. It is made of durable plastic and measures approximately 4 inches in diameter. The wheel has a 3/4 inch hub and is designed to fit most GE dryers. This part helps to keep the drum of the dryer rotating smoothly, allowing ...

GE Sensor Temp - Part# WR23X10579 is a temperature sensor designed for use in GE refrigerators. It is a thermistor-type temperature sensor that measures the temperature inside the refrigerator and sends a signal to the main control board. The main control board then uses this signal to adjust the ...

GE Sensor Temp - Part# WR23X10580 is a temperature sensor for GE refrigerators. It is used to monitor the temperature inside the refrigerator and send a signal to the main control board when the temperature rises above or falls below a certain level. The sensor is located in the fresh food compart...

GE SPRING ETC FRENCH (Part# WR02X12650) is a replacement part for French-style refrigerators. It is a spring-loaded door closer that helps keep the refrigerator door closed when not in use. The part is made of durable metal and plastic and is designed to fit most French-style refrigerators. It inc...

GE Switch Door Part# WR23X10593 is a replacement part for GE refrigerators. It is the door switch that controls the light and temperature inside the refrigerator. The switch is located on the inside of the refrigerator door and when it is pressed, it turns on the light and activates the temperatur...

GE Valve-Water Fitting - Part# WR57X10091 is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with General Electric refrigerators. This valve-water fitting is used to connect the water line from the wall to the refrigerator. It is made of durable plastic and includes a...