Model: PFIC1NFZCBV

GE Articulation Mullion Assembly (Part# WR17X12753) is a part used in some GE refrigerator models. It is a plastic part that connects the two sides of the refrigerator door together. The assembly includes two plastic pieces that are connected by a metal pin. The articulation mullion assembly helps...

The GE Articulation Mullion Assy - Part# WR17X12759 is a part used in refrigerators to help support the door. It is a plastic part that connects the door to the refrigerator frame and helps keep the door aligned with the frame. The part includes two metal pins that fit into holes in the door and f...

GE Board ASM Temp Control - Part# WR55X10684 is a temperature control board for General Electric (GE) refrigerators. It is used to regulate the temperature of the refrigerator and freezer compartments. The board is designed to monitor the temperature of both compartments and adjust the cooling sys...

GE Cross Bar Pinion (Part# WR02X13388) is a replacement part for GE washers. It is a metal gear that helps to move the agitator back and forth during the wash cycle. The pinion is connected to the drive shaft and engages with the agitator cam to move the agitator. This part is made of metal and me...

GE Filter Asm and Tube - Part# WR17X11894 is a part used in GE refrigerator models. It is a water filter assembly that includes a filter tube, filter head, and a water filter. The filter tube connects to the water supply line and the filter head connects to the refrigerator's water dispenser. The ...

GE Frame Pan Meat (Part# WR72X10218) is a replacement part for GE refrigerators. It is a plastic frame that holds the meat pan in place. The frame is designed to fit into the refrigerator’s meat pan holder and secure the pan in place. This part helps keep the meat pan from sliding around and spill...

GE GASKET - Part# WR14X10328 is a replacement part for GE refrigerators. It is a rubber gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of durable rubber and has a black finish. It measures approximately 28 inches long by 2 inches wide and ha...

GE GASKET - Part# WR14X10330 is a replacement part for a variety of GE refrigerators. It is a gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of flexible rubber and has an adhesive backing for easy installation. It is designed to fit all GE r...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator French Door Gasket Seal With Flap - Part# WR14X10237 is a replacement part for French door refrigerators. This gasket seal is designed to fit around the edges of the refrigerator door, providing an airtight seal that helps keep cold ai...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator French Door Gasket Seal With Flap - Part# WR14X10238 is a replacement part for French door refrigerators. This gasket seal is designed to keep cold air in and warm air out, helping to maintain the desired temperature inside the refrige...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Ice Maker Assembly - Part# WR30X10087 is a replacement part for refrigerators that have an ice maker. This assembly includes the ice maker, the mounting bracket, and the wire harness. The ice maker is responsible for producing and disp...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator ICE MAKER FILL CUP - Part# WR29X10092 is a replacement part for the ice maker in certain GE, Hotpoint, PartsIPS and Kenmore refrigerators. This fill cup is used to fill the ice maker with water and then dispense it into the ice tray. T...

GE Handle Pan Veg Lh - Part# WR17X12751 is a replacement handle for a GE refrigerator vegetable pan. This part is made of durable plastic and is designed to fit the left side of the vegetable pan. It has a white finish and features a recessed grip for easy handling. The handle measures approximate...

GE Handle Pan Veg Rh - Part# WR17X12750 is a replacement handle for a GE refrigerator vegetable pan. This part is made of durable plastic and is designed to fit the right side of the vegetable pan. It has a white finish and features a screw hole for easy installation. The handle measures approxima...

GE Heater Defrost Assembly (Part# WR51X10094) is a replacement part for GE refrigerators. It is used to regulate the temperature inside the refrigerator and prevent it from freezing up. The assembly includes a heater, a thermostat, and a defrost timer. The heater warms up the evaporator coils in o...

GE Low Side Asm - Part# WR85X10087 is a part for a refrigerator. It is the lower side assembly for the refrigerator and includes the lower grille, lower door gasket, and mounting hardware. The part number WR85X10087 is specific to General Electric (GE) refrigerators. This part helps to keep the te...

The GE Module Shelf Assembly FF (Part# WR71X10875) is a replacement part for GE refrigerators. It is a plastic shelf that fits into the refrigerator door and holds items such as condiments, jars, and bottles. The shelf is designed to be adjustable so that it can fit different sizes of items. It al...

GE Motor DC Evap Fan Asm - Part# WR60X10277 is a replacement evaporator fan motor assembly for GE refrigerator models. This part is used to circulate air through the refrigerator and freezer compartments in order to maintain proper temperatures. The motor assembly includes the motor, fan blade, mo...

GE Scr 10-14 Pl Flt20 3/4 S - Part# WR01X10939 is a self-tapping screw manufactured by General Electric. It is made of steel and has a flat head with a Phillips drive. The screw has a 10-14 thread size, a 3/4 inch length, and is zinc plated for corrosion resistance. This screw is used to secure pa...

GE Shield Light FF (Part# WR17X12671) is a refrigerator light shield designed to protect the light bulb in the refrigerator from being damaged. It is made of a durable plastic material and fits over the light bulb in the refrigerator. The shield helps to protect the bulb from accidental breakage a...

GE Support Cross Bar - Part# WR02X13385 is a part used in many GE refrigerators. It is a metal bar that is used to support the refrigerator shelves and drawers. The bar is made of stainless steel and measures approximately 2 inches wide by 13 inches long. It has two holes at each end for mounting ...

GE Valve and Tube Assembly Part# WR57X10086 is a replacement part for GE refrigerators. It is a valve and tube assembly that is used to regulate the flow of water from the water supply line to the refrigerator. The valve and tube assembly consists of a plastic valve body, two plastic tubes, two o-...

The PIN HINGE ADJ BM - Part# WR01X10793 is a part used in many GE and Hotpoint refrigerators. It is a pin hinge adjustment bracket that is used to adjust the door alignment of the refrigerator. The bracket is made of metal and has two holes for mounting screws. It also has two pins that fit into t...