Model: PDW8900L00BB

Cage roller bearing assembly, part# WD30X10020, is a component used in many appliances such as washing machines and dryers. It is a type of bearing that uses rollers to reduce friction between two surfaces. The cage roller bearing assembly consists of an inner and outer race, rollers, and a cage. ...

GE ARM SPRAY LOW ASM - Part# WD22X10047 is a replacement part for GE dishwashers. It is the lower spray arm assembly, which is responsible for spraying water onto the dishes during the wash cycle. The assembly includes the spray arm, mounting bracket, and mounting screws. The spray arm has multipl...

GE ARM SPRAY MID ASM - Part# WD22X10048 is a replacement part for GE dishwashers. It is the middle spray arm assembly, which is responsible for spraying water onto the dishes during the wash cycle. The assembly includes the spray arm, mounting bracket, and screws. This part helps to ensure that di...

GE Basket Silverware Middle - Part# WD28X10106 is a replacement part for dishwashers. It is the middle basket of the silverware holder and is designed to fit GE, Hotpoint, and Kenmore dishwashers. This part helps to keep silverware organized and secure during the dishwashing cycle. The basket is m...

GE BASKET SMALL ITEMS ASM - Part# WD28X10120 is a replacement part for a dishwasher. It is the small items basket assembly, which is used to hold smaller items such as silverware and other utensils during the dishwashing cycle. This part is made of durable plastic and comes with a handle for easy ...

GE Funnel and Gasket Assembly (Part# WD12X10181) is a replacement part for GE dishwashers. It is a combination of a funnel and gasket that fits into the dishwasher's sump assembly. The funnel helps to direct water from the dishwasher's spray arm into the sump, while the gasket seals the connection...

GE Hose Fill Assembly (Part# WD24X10036) is a replacement part for GE dishwashers. It is a hose assembly that connects the water inlet valve to the dishwasher tub. This part is made of plastic and rubber and includes the fill hose, clamp, and two elbow fittings. The fill hose carries water from th...

GE Inner Rail Upper Rack - Part# WD30X10021 is a replacement part for a dishwasher. It is the upper rack that slides along the inner rail of the dishwasher. This part is made of metal and plastic and has two tines on each side to hold dishes in place. It also has a handle on the front for easy rem...

GE Retainer Comb - Part# WD12X10117 is a replacement part for GE dishwashers. It is a plastic comb-like piece that fits into the lower dishrack and helps to keep the dishes in place during the wash cycle. The retainer comb is designed to fit specific models of GE dishwashers, so it is important to...

GE Retainer Handle - Part# WD13X10017 is a replacement part for GE dishwashers. It is a plastic handle that attaches to the dishwasher door and helps to secure the door in place when it is closed. The handle is designed to fit most GE dishwashers and is easy to install. It comes with all necessary...

GE Roller Upper Rack - Part# WD12X10138 is a replacement part for GE dishwashers. It is the upper rack assembly, which includes the upper rack, roller wheels, and mounting hardware. The roller wheels allow the upper rack to slide in and out of the dishwasher easily. This part is made of durable pl...

GE SCR 10-32 GXTT FLP.595 S - Part# WD02X10123 is a dishwasher door gasket. It is a replacement part for GE dishwashers and is made of black rubber. The gasket measures approximately 32 inches long and 10 inches wide, and has a flange that is 595 inches in length. This part helps to create a water...

GE SCR 8-18 B POR 1/4 SS - Part# WD02X10130 is a part manufactured by General Electric (GE). It is a 1/4 inch stainless steel screw that is 8-18 threads per inch (TPI) and has a Phillips head. This part is used in various GE appliances, such as dishwashers, refrigerators, and ovens. It is used to ...

The GE SEAL FLOOD SWITCH - Part# WD01X10264 is a water-sensing switch designed to detect the presence of water and shut off the power to an appliance or device when it is detected. The switch is designed to be used in areas where flooding may occur, such as basements, laundry rooms, and other area...

GE Shelf Cup Full Length - Part# WD28X10146 is a replacement part for GE refrigerators. It is a full-length shelf cup that fits into the side of the refrigerator and holds items in place on the shelf. The shelf cup is made of durable plastic and has a black finish. It measures approximately 8 inch...

The GE Slide End Cap (Part# WD12X10184) is a genuine OEM (Original Equipment Manufacturer) part designed and engineered specifically for use with GE dishwashers. This part is made of durable plastic and is used to secure the end of the dishwasher slide rail to the side of the dishwasher. It helps ...

GE SPRING DOOR (Part# WD03X10022) is a replacement part for GE dishwashers. It is a spring-loaded door that helps to keep the dishwasher door closed and sealed during the wash cycle. The spring helps to keep the door from bouncing open and allows for a tight seal between the door and the tub. This...

The GE Strip Hardness Tester (Part# WD01X10295) is a device used to measure the hardness of metal strips. It is designed to measure the hardness of metal strips up to 0.125 inches thick and up to 12 inches wide. The tester uses a spring-loaded plunger that is pressed against the strip with a prede...

GE TRIM GASKET - Part# WD08X10055 is a replacement part for GE dishwashers. It is a rubber gasket that fits around the trim of the dishwasher door. The gasket helps to create a seal between the door and the dishwasher, preventing water from leaking out. It also helps to reduce noise from the dishw...