Model: PDW8600N20CC

Cage roller bearing assembly, part# WD30X10020, is a component used in many appliances such as washing machines and dryers. It is a type of bearing that uses rollers to reduce friction between two surfaces. The cage roller bearing assembly consists of an inner and outer race, rollers, and a cage. ...

A CUP HINGE, also known as a Euro-style hinge, is a type of hinge used in cabinetry and furniture construction. It is designed to be concealed within the cabinet or furniture piece, providing a clean, modern look. The CUP HINGE, Part# WD01X10218, is a self-closing hinge with an adjustable tension ...

GE ARM SPRAY LOW ASM - Part# WD22X10047 is a replacement part for GE dishwashers. It is the lower spray arm assembly, which is responsible for spraying water onto the dishes during the wash cycle. The assembly includes the spray arm, mounting bracket, and mounting screws. The spray arm has multipl...

GE ARM SPRAY MID ASM - Part# WD22X10048 is a replacement part for GE dishwashers. It is the middle spray arm assembly, which is responsible for spraying water onto the dishes during the wash cycle. The assembly includes the spray arm, mounting bracket, and screws. This part helps to ensure that di...

The GE Bearing Mid Spray Arm (Part# WD01X10384) is a replacement part for dishwashers. It is a mid-level spray arm that helps to evenly distribute water during the dishwashing cycle. The spray arm is made of durable plastic and has several small holes that allow water to be sprayed in all directio...

GE COMB LOWER RACK ASM - Part# WD28X10133 is a replacement part for a GE dishwasher. It is the lower rack assembly, which includes the lower rack, tines, and mounting hardware. The rack is made of durable plastic and is designed to hold dishes securely in place during the dishwashing cycle. The ti...

The GE Conduit Spray Arm Mid (Part# WD12X10110) is a replacement part for dishwashers. It is a plastic arm that is used to direct the water spray from the dishwasher’s pump and motor assembly to the dishes in the dishwasher. The spray arm has several holes in it that allow water to be sprayed onto...

GE Cover Vent Part# WD12X10127 is a replacement part for GE dishwashers. It is a vent cover that fits over the vent opening in the dishwasher door. The cover helps to keep food particles and other debris from entering the vent and clogging it up. It also helps to keep moisture from entering the ve...

GE DOME FLOAT - Part# WD12X10119 is a replacement part for GE dishwashers. It is a float switch that helps to detect the water level in the dishwasher. The float switch is located inside the dishwasher and is connected to a small plastic arm. When the water level rises, the arm lifts up and activa...

GE Filter Fine ASM - Part# WD12X10109 is a replacement part for GE dishwashers. It is a filter assembly that helps to keep food particles and other debris from entering the dishwasher pump and clogging it. The filter assembly consists of a fine mesh screen, a plastic housing, and two O-rings. The ...

GE Funnel and Gasket Assembly (Part# WD12X10181) is a replacement part for GE dishwashers. It is a combination of a funnel and gasket that fits into the dishwasher's sump assembly. The funnel helps to direct water from the dishwasher's spray arm into the sump, while the gasket seals the connection...

The GE General Electric Hotpoint PartsIPS Kenmore Dishwasher Detergent and Rinse Aid Dispenser Module - Part# WD12X10163 is a replacement part for dishwashers. It is designed to dispense detergent and rinse aid into the dishwasher during the wash cycle. The module includes a detergent cup, rinse a...

The GE General Electric Hotpoint PartsIPS Kenmore Dishwasher Dispenser Cap Assembly - Part# WD12X10236 is a replacement part for dishwashers. It is a cap assembly that fits over the detergent dispenser in the dishwasher. The cap assembly helps to keep the detergent from spilling out of the dispens...

The GE General Electric Hotpoint PartsIPS Kenmore Dishwasher Silverware Cutlery Basket - Part# WD28X10128 is a replacement part for dishwashers. It is designed to hold silverware and other cutlery items during the dishwashing cycle. The basket is made of durable plastic and features a slotted desi...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Dishwasher Rinse Aid Dispenser Cap (Part# WD12X10122) is a replacement part for dishwashers. It is used to cover the rinse aid dispenser, which is responsible for releasing rinse aid into the dishwasher during the rinse cycle. The cap helps to ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Dishwasher Tub Seal Gasket - Part# WD08X10032 is a replacement part for dishwashers. It is a rubber gasket that fits around the inner tub of the dishwasher and helps to create a watertight seal. This seal helps to prevent water from leaking out...

GE Handle Latch CT (Part# WD13X10011) is a replacement part for GE dishwashers. It is a black plastic handle latch that is used to secure the dishwasher door closed. The latch has two metal prongs that fit into the slots on the dishwasher door and then snap into place when the door is closed. The ...

GE Hose - Part# WD24X10024 is a replacement hose for GE dishwashers. It is a 6-foot long corrugated plastic hose with a 3/8-inch inner diameter and a 5/8-inch outer diameter. The hose is designed to connect the dishwasher's water inlet valve to the water supply line. It is made of durable plastic ...

GE Inner Rail Upper Rack - Part# WD30X10021 is a replacement part for a dishwasher. It is the upper rack that slides along the inner rail of the dishwasher. This part is made of metal and plastic and has two tines on each side to hold dishes in place. It also has a handle on the front for easy rem...

GE LOCKNUT Part# WD12X10135 is a genuine OEM (Original Equipment Manufacturer) part designed and engineered specifically for use with GE dishwashers. This locknut is used to secure the dishwasher drain hose to the sink drain. It is made of durable plastic and features a unique design that prevents...

GE NUT TOWER HEATER ASM - Part# WD01X10214 is a replacement part for GE dryers. It is a heating element assembly that includes the heating element, high limit thermostat, thermal cut-off fuse, and mounting hardware. The heating element generates the heat needed to dry clothes in a dryer. The high ...

GE Retainer Comb Part# WD12X10116 is a replacement part for GE dishwashers. It is a plastic comb-like piece that fits into the dishwasher door and helps to hold the lower dishrack in place. The retainer comb is made of durable plastic and is designed to fit all GE dishwashers. It helps to keep the...

GE Retainer Handle - Part# WD13X10017 is a replacement part for GE dishwashers. It is a plastic handle that attaches to the dishwasher door and helps to secure the door in place when it is closed. The handle is designed to fit most GE dishwashers and is easy to install. It comes with all necessary...

GE Roller Upper Rack - Part# WD12X10138 is a replacement part for GE dishwashers. It is the upper rack assembly, which includes the upper rack, roller wheels, and mounting hardware. The roller wheels allow the upper rack to slide in and out of the dishwasher easily. This part is made of durable pl...

The GE SEAL FLOOD SWITCH - Part# WD01X10264 is a water-sensing switch designed to detect the presence of water and shut off the power to an appliance or device when it is detected. The switch is designed to be used in areas where flooding may occur, such as basements, laundry rooms, and other area...

The GE Slide End Cap (Part# WD12X10184) is a genuine OEM (Original Equipment Manufacturer) part designed and engineered specifically for use with GE dishwashers. This part is made of durable plastic and is used to secure the end of the dishwasher slide rail to the side of the dishwasher. It helps ...

GE SPRING DOOR (Part# WD03X10022) is a replacement part for GE dishwashers. It is a spring-loaded door that helps to keep the dishwasher door closed and sealed during the wash cycle. The spring helps to keep the door from bouncing open and allows for a tight seal between the door and the tub. This...

The GE Strip Hardness Tester (Part# WD01X10295) is a device used to measure the hardness of metal strips. It is designed to measure the hardness of metal strips up to 0.125 inches thick and up to 12 inches wide. The tester uses a spring-loaded plunger that is pressed against the strip with a prede...

GE SUMP INLET - Part# WD18X10026 is a part used in GE dishwashers. It is a sump inlet that connects the dishwasher's water supply to the sump assembly. The sump assembly is responsible for collecting and draining water from the dishwasher. This part helps to ensure that the water supply is connect...

A pulley hinge, also known as a lift hinge, is a type of hinge used to lift and lower heavy objects. It is typically used in applications such as garage doors, gates, and other heavy-duty applications. The pulley hinge consists of two parts: the stationary part which is mounted to the door or gate...