Model: PD968SP1SS

GE Bracket Anti-Tip is a safety device designed to prevent a range or stove from tipping over. It is an important safety feature for any home with young children or pets. The GE Bracket Anti-Tip Part# WB02X10739 is designed to be installed on the rear of the range or stove and secured to the floor...

GE Control OVN ERC Part# WB27T11151 is a replacement electronic range control (ERC) board for General Electric ovens. It is used to replace the original ERC board in GE ovens that have malfunctioned or been damaged. The board controls the oven’s temperature, bake and broil functions, and clock/tim...

GE Element Bake Part# WB44T10055 is a replacement bake element for GE ovens. It is a genuine OEM part that is made of metal and is used to heat the oven cavity. The element has two terminals that are connected to the bake switch. It measures approximately 16-1/2 inches wide by 15-1/4 inches long a...

GE Element Radiant 5.5 in (Part# WB30T10145) is a replacement radiant element for GE electric ranges. It is a 5.5 inch round element with two 6-inch long heating coils that provide even heat distribution across the cooking surface. The element has a wattage of 2400 and is designed to fit into most...

GE Harness Wire Glass Touch (Part# WB18T10386) is a replacement part for GE ovens. It is a wiring harness that connects the glass touch control panel to the oven's main control board. The harness includes two wires, one for the power supply and one for the ground connection. The harness also inclu...

GE KNOB ASM - Part# WB03T10263 is a replacement part for General Electric (GE) range/ovens. It is a knob assembly that is used to control the temperature of the oven. The knob assembly includes the knob, shaft, and mounting hardware. The knob has a white finish and features a number of settings th...

GE MAINTOP GLASS ASM (BK) - Part# WB62T10694 is a replacement part for a GE range. It is the main top glass assembly for the range, which includes the glass top, burner knobs, and burner receptacles. The black color of this part makes it compatible with most GE ranges. This part is designed to pro...

GE Oven Latch Part# WB14T10069 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the strike plate. The latch is made of metal and has a plastic handle that can be pushed down to release ...

A GE Probe Thermistor is a temperature sensing device used to measure the temperature of liquids and gases. It is a type of thermistor, which is a resistor whose resistance changes with temperature. The GE Probe Thermistor Part# WB20T10025 is a negative temperature coefficient (NTC) thermistor wit...

The GE Rack Oven (Gy) - Part# WB48T10059 is a commercial-grade oven designed for baking and roasting. It features a large interior capacity that can accommodate up to six full-size sheet pans. The oven is equipped with an adjustable thermostat that allows you to set the temperature from 150°F to 5...

GE SPACER REINFORCEMENT - Part# WB02T10452 is a part used in many GE ovens to provide additional support and stability to the oven walls. It is made of metal and is designed to fit between the oven walls and the back panel of the oven. The spacer reinforcement helps to keep the oven walls from fle...

GE STUD COMPOSITE - Part# WB02T10455 is a composite part manufactured by General Electric (GE). It is a two-piece assembly consisting of a stud and a nut. The stud is made of steel and has a threaded end that screws into the nut. The nut is made of plastic and has an internal thread that mates wit...

GE SWITCH INF CNTL - Part# WB24T10134 is a control switch for a range or oven. It is used to control the temperature of the oven and to turn it on and off. The switch has two terminals, one for the power supply and one for the oven element. It also has a knob that can be turned to adjust the tempe...

GE Switch Infinite Control - Part# WB24T10139 is a replacement part for a range of GE ovens. It is an infinite switch that controls the temperature of the oven. The switch has three settings: low, medium, and high. It is designed to replace the existing infinite switch in GE ovens and can be used ...

HINGE DOOR LT - Part# WB10T10085 is a replacement part for a dishwasher door. It is made of durable plastic and metal and is designed to fit most dishwashers. The part includes two hinges, one on the top and one on the bottom of the door, as well as two screws for installation. The hinge door LT i...

HINGE DOOR RT - Part# WB10T10084 is a replacement part for a range or oven door. It is made of durable plastic and metal and is designed to fit most brands of ranges and ovens. The part includes two hinges, one on each side of the door, that allow the door to open and close smoothly. The hinges ar...