Model: PCS968DP2BB

GE Blower Assembly - Part# WB26T10039 is a replacement part for a variety of GE ovens and ranges. It is the blower assembly that circulates air throughout the oven cavity to ensure even cooking temperatures. The blower assembly includes the motor, fan blade, and housing. The motor is designed to b...

GE Bracket Anti-Tip Assembly (Part# WB02T10416) is a safety device designed to prevent a range from tipping forward when excessive force is applied to the open door. It consists of two metal brackets that attach to the rear of the range and floor, and a steel cable that connects the two brackets. ...

GE Control OVN ERC Part# WB27T11151 is a replacement electronic range control (ERC) board for General Electric ovens. It is used to replace the original ERC board in GE ovens that have malfunctioned or been damaged. The board controls the oven’s temperature, bake and broil functions, and clock/tim...

GE Element Radiant 5.5 in (Part# WB30T10145) is a replacement radiant element for GE electric ranges. It is a 5.5 inch round element with two 6-inch long heating coils that provide even heat distribution across the cooking surface. The element has a wattage of 2400 and is designed to fit into most...

GE Harness Wire Glass Touch (Part# WB18T10386) is a replacement part for GE ovens. It is a wiring harness that connects the glass touch control panel to the oven's main control board. The harness includes two wires, one for the power supply and one for the ground connection. The harness also inclu...

GE Kit Backsplash (WH) - Part# WB07T10681 is a kitchen backsplash kit from GE Appliances. This kit includes everything you need to install a backsplash in your kitchen. The kit includes one 24" x 24" white tile, one 24" x 24" white trim piece, and four adhesive strips. The tile is made of durable ...

GE Panel CNTL ASM - Part# WB36T10668 is a control panel assembly for General Electric (GE) ovens. It is a replacement part for many GE oven models and is used to control the oven's temperature, timer, and other functions. The panel includes a display screen, buttons, and knobs that allow the user ...

A GE Probe Thermistor is a temperature sensing device used to measure the temperature of liquids and gases. It is a type of thermistor, which is a resistor whose resistance changes with temperature. The GE Probe Thermistor Part# WB20T10025 is a negative temperature coefficient (NTC) thermistor wit...

The GE Rack Oven (Gy) - Part# WB48T10059 is a commercial-grade oven designed for baking and roasting. It features a large interior capacity that can accommodate up to six full-size sheet pans. The oven is equipped with an adjustable thermostat that allows you to set the temperature from 150°F to 5...

GE SPACER REINFORCEMENT - Part# WB02T10452 is a part used in many GE ovens to provide additional support and stability to the oven walls. It is made of metal and is designed to fit between the oven walls and the back panel of the oven. The spacer reinforcement helps to keep the oven walls from fle...

GE STUD COMPOSITE - Part# WB02T10453 is a composite part used in many GE appliances. It is a metal stud that is used to secure the door of the appliance to the frame. The stud is made of a combination of steel and plastic, which makes it strong and durable. It has two holes at each end for mountin...

GE SWITCH INF CNTL - Part# WB24T10134 is a control switch for a range or oven. It is used to control the temperature of the oven and to turn it on and off. The switch has two terminals, one for the power supply and one for the oven element. It also has a knob that can be turned to adjust the tempe...

GE Switch Infinite Control - Part# WB24T10139 is a replacement part for a range of GE ovens. It is an infinite switch that controls the temperature of the oven. The switch has three settings: low, medium, and high. It is designed to replace the existing infinite switch in GE ovens and can be used ...

GE TRIM VERT SDE RT (WH) - Part# WB07T10522 is a white trim kit for a GE Profile Series 30" built-in single wall oven. The trim kit is designed to provide a finished look to the oven when it is installed in a wall or cabinet. The trim kit includes two side panels, one top panel, and one bottom pan...

GE TRIM VERT SIDE LT (WH) - Part# WB07T10636 is a trim kit made by General Electric for use with their range hoods. It is a white plastic trim piece that fits on the left side of the range hood and covers the gap between the hood and the wall. The trim kit includes two pieces: a vertical trim piec...

HINGE DOOR LT - Part# WB10T10085 is a replacement part for a dishwasher door. It is made of durable plastic and metal and is designed to fit most dishwashers. The part includes two hinges, one on the top and one on the bottom of the door, as well as two screws for installation. The hinge door LT i...

HINGE DOOR RT - Part# WB10T10084 is a replacement part for a range or oven door. It is made of durable plastic and metal and is designed to fit most brands of ranges and ovens. The part includes two hinges, one on each side of the door, that allow the door to open and close smoothly. The hinges ar...