Model: PCB950SF2SS

Badge GE Part# WB02T10589 is a replacement part for a range of General Electric (GE) ovens. It is a control panel badge that is used to identify the model and serial number of the oven. The badge is made of metal and has a black finish with white lettering. It measures approximately 2 inches by 1 ...

GE 12 Screws - Part# WB1X500D are self-tapping screws made of steel and designed for use in a variety of applications. The screws have a 12-gauge diameter and are 1 inch long. They feature a Phillips head drive and are zinc plated for corrosion resistance. These screws are ideal for use in wood, m...

GE BASE RAIL - Part# WB02T10352 is a part of the GE Profile Series of ovens. It is a metal rail that runs along the bottom of the oven cavity and helps to support the oven racks. The rail is made from stainless steel and has a black finish. It measures approximately 28 inches in length and 2 inche...

GE BASE RAIL - Part# WB02T10353 is a base rail for a range or oven. It is designed to provide a secure and stable platform for the range or oven to sit on. The base rail is made of heavy-duty steel and is designed to be durable and long-lasting. It features an adjustable height, allowing it to fit...

GE Cover Terminal Block - Part# WB02T10564 is a terminal block cover designed to fit over the terminals of a GE terminal block. It is made of durable plastic and is designed to protect the terminals from dust, dirt, and other contaminants. The cover has two tabs that snap into place to secure it i...

GE Element Haliant (Dual) - Part# WB30T10135 is a dual element haliant heating element designed for use in GE ovens. It is a two-piece unit that consists of an inner and outer element. The inner element is the main heating element and is used to heat the oven cavity. The outer element is a seconda...

GE Element Haliant 12 TRPL Part# WB30T10155 is a replacement heating element for GE electric ranges. It is a 12-inch triple haliant element that provides three different wattage levels to give you more control over your cooking. The element has a wattage of 2400/1800/1200 watts and features an adj...

GE Element Radiant 5.5 in (Part# WB30T10145) is a replacement radiant element for GE electric ranges. It is a 5.5 inch round element with two 6-inch long heating coils that provide even heat distribution across the cooking surface. The element has a wattage of 2400 and is designed to fit into most...

GE GASKET OVN DR - Part# WB04T10076 is a replacement part for General Electric ovens. It is a gasket that seals the door of the oven to keep heat and smoke from escaping. The gasket is made of a durable, heat-resistant material and is designed to fit around the perimeter of the oven door. It helps...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Temperature Sensor Assembly - Part# WB21X22134 is a replacement part for ovens. It is designed to measure and monitor the temperature inside the oven cavity. The sensor assembly consists of a thermistor, which is a temperature-sensitive ...

) GE Glass Cooktop Assy (Dropship - Part# WB62X22240) is a replacement part for a GE range or cooktop. It is a complete assembly that includes the glass top, burner grates, and knobs. The part number indicates that it is a dropship item, meaning that it will be shipped directly from the manufacture...

GE Handle and End Cap Assembly (Part# WB15T10222) is a replacement part for GE range ovens. It is a black plastic handle and end cap assembly that is used to open and close the oven door. The handle has a textured finish for easy gripping, and the end cap snaps into place to secure the handle in p...

GE KNOB ASM - Part# WB03T10336 is a replacement part for General Electric (GE) range/ovens. It is a knob assembly that is used to control the temperature of the oven. The knob assembly includes the knob, shaft, and mounting hardware. The knob has a white finish with black numbers and indicator lin...

GE KNOB ASM - Part# WB03T10337 is a replacement part for General Electric (GE) range/ovens. It is a knob assembly that is used to control the temperature of the oven. The knob assembly includes the knob, shaft, and mounting hardware. The knob has a white finish with black markings for easy tempera...

GE LAMP HALOGEN G9 - Part# WB08T10045 is a halogen light bulb made by General Electric. It is a G9 base type, which means it has two pins that are 9 millimeters apart. This bulb is designed to provide bright, white light with minimal energy consumption. It has a rated life of 2,000 hours and produ...

GE Motor PSC Conv - Part# WB26T10043 is a motor and fan assembly for a range hood. It is designed to replace the existing motor and fan assembly in many GE, Hotpoint, and Kenmore range hoods. The motor is a permanent split capacitor (PSC) type, which means it has two windings that are permanently ...

GE Panel ASM Bonded LWR (SS) - Part# WB56X20026 is a part used in GE refrigerators. It is a lower panel assembly that is bonded with stainless steel. This part is used to replace the lower panel on the refrigerator door. It includes the stainless steel panel, mounting screws, and a plastic trim pi...

The GE Rack Oven (Gy) - Part# WB48T10059 is a commercial-grade oven designed for baking and roasting. It features a large interior capacity that can accommodate up to six full-size sheet pans. The oven is equipped with an adjustable thermostat that allows you to set the temperature from 150°F to 5...

GE SCREW 10-32 HEX 1 3/4 IN - Part# WB01T10132 is a hex head screw manufactured by General Electric. It is made of steel and has a 10-32 thread size. The length of the screw is 1 3/4 inches and it has a hex head for easy installation. This screw is used in many applications, such as securing elect...

GE Screw-Pkg 12 - Part# WZ4X245D is a package of twelve screws manufactured by General Electric. The screws are made from steel and have a 4-40 thread size. They measure 0.245 inches in length and have a Phillips head drive type. The screws are designed for use in applications such as mounting cir...

GE Switch Infinite Control - Part# WB24T10162 is a replacement part for a range of GE ovens. It is an infinite switch that controls the heat of the oven. The switch has two terminals and is designed to be used with a variety of GE ovens. It can be used to replace an existing switch or to add addit...

GE Window Pack Assy - Part# WB56X22160 is a window assembly for GE refrigerators. It includes the window, frame, and gasket. The window is made of clear plastic and the frame is made of white plastic. The gasket seals the window to the refrigerator door to keep cold air in and warm air out. This p...

HINGE ASM (LT) - Part# WB10T10105 is a left-hand hinge assembly for a range or oven. It is made of metal and plastic and includes the mounting screws. The hinge is designed to provide support for the door of the range or oven, allowing it to open and close smoothly. The hinge also helps to keep th...

HINGE ASM (RT) - Part# WB10T10104 is a right-hand hinge assembly for ovens. It is a replacement part manufactured by General Electric and is used to replace worn or broken hinges on ovens. The hinge assembly includes the hinge, mounting screws, and instructions for installation. The hinge is made ...

Range heat shields are designed to protect the range from excessive heat. The Range Heat Shield Part# WB02T10468 is a replacement part for GE ranges. It is made of stainless steel and is designed to fit around the bottom of the range, protecting it from heat generated by the oven. The shield helps...

A range oven door gasket, also known as a door seal, is a rubber or silicone seal that fits around the perimeter of the oven door. It helps to keep heat and air inside the oven cavity, ensuring that food cooks evenly and efficiently. The gasket also helps to prevent hot air from escaping and poten...

The Range Radiant Element Bracket (Part# WB02X20902) is a replacement part for a range or oven. It is used to secure the radiant element to the cooktop. The bracket is made of metal and has two mounting holes for attaching the element. It also has two slots for securing the element in place. This ...

The Receiver Hinge UPR (LT) - Part# WB10T10101 is a part used in many General Electric (GE) and Hotpoint ovens. It is a replacement part for the upper right side of the oven door. The hinge is made of metal and has two mounting holes on the top and bottom. It also has two plastic bushings that fit...

The RH Hinge Receiver (Part# WB10T10100) is a replacement part for a range of ovens and cooktops. It is used to attach the oven door to the range body. The part is made of metal and is designed to fit into the right-hand side of the range body. It has two holes for screws that are used to secure i...