Model: PB960BJ6TS

Badge ASM - Part# WB02X29637 is a part used in some GE and Hotpoint brand ovens. It is a badge assembly that is used to identify the model and serial number of the oven. The badge assembly includes a metal plate with an adhesive backing, which is affixed to the front of the oven. The metal plate h...

GE BASE RAIL - Part# WB02T10352 is a part of the GE Profile Series of ovens. It is a metal rail that runs along the bottom of the oven cavity and helps to support the oven racks. The rail is made from stainless steel and has a black finish. It measures approximately 28 inches in length and 2 inche...

GE BASE RAIL - Part# WB02T10353 is a base rail for a range or oven. It is designed to provide a secure and stable platform for the range or oven to sit on. The base rail is made of heavy-duty steel and is designed to be durable and long-lasting. It features an adjustable height, allowing it to fit...

GE Bracket Strain Relief Part# WB02T10542 is a bracket designed to provide strain relief for electrical cords and cables. It is used to secure the cord or cable to the wall or other surface, preventing it from being pulled out of the outlet or other connection point. The bracket is made of durable...

The GE Cable Clip (Part# WB02X25982) is a small plastic clip designed to secure cables and wires in place. It is used to keep cords and wires organized and out of the way. The clip has two parts: a base that attaches to the wall or other surface, and a top that holds the cable in place. The clip i...

GE Cover Terminal Block - Part# WB02T10564 is a terminal block cover designed to fit over the terminals of a GE terminal block. It is made of durable plastic and is designed to protect the terminals from dust, dirt, and other contaminants. The cover has two tabs that snap into place to secure it i...

GE Element Haliant (Dual) - Part# WB30T10135 is a dual element haliant heating element designed for use in GE ovens. It is a two-piece unit that consists of an inner and outer element. The inner element is the main heating element and is used to heat the oven cavity. The outer element is a seconda...

GE Element Haliant 12 TRPL Part# WB30T10155 is a replacement heating element for GE electric ranges. It is a 12-inch triple haliant element that provides three different wattage levels to give you more control over your cooking. The element has a wattage of 2400/1800/1200 watts and features an adj...

GE Element Radiant 5.5 in (Part# WB30T10145) is a replacement radiant element for GE electric ranges. It is a 5.5 inch round element with two 6-inch long heating coils that provide even heat distribution across the cooking surface. The element has a wattage of 2400 and is designed to fit into most...

GE END PLATE LH DG - Part# WB07X29534 is a left-hand end plate for a General Electric (GE) dishwasher. This part is used to secure the interior components of the dishwasher, such as the spray arm, filter, and other parts. It is made of durable plastic and attaches to the left side of the dishwashe...

GE END PLATE RH DG - Part# WB07X29535 is a replacement part for GE brand ovens. It is the right-hand end plate for the oven door. This part is made of durable plastic and is designed to fit specific models of GE ovens. The end plate helps to keep the door securely closed and prevents heat from esc...

GE GASKET OVN DR - Part# WB04T10076 is a replacement part for General Electric ovens. It is a gasket that seals the door of the oven to keep heat and smoke from escaping. The gasket is made of a durable, heat-resistant material and is designed to fit around the perimeter of the oven door. It helps...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Temperature Sensor Assembly - Part# WB21X22134 is a replacement part for ovens. It is designed to measure and monitor the temperature inside the oven cavity. The sensor assembly consists of a thermistor, which is a temperature-sensitive ...

GE Handle and End Cap Asm - Part# WB15X29162 is a replacement part for General Electric (GE) brand microwaves. It is a handle and end cap assembly that includes the handle, two end caps, and two screws. The handle is made of black plastic and measures approximately 8 inches long. The end caps are ...

GE LAMP HALOGEN G9 - Part# WB08T10045 is a halogen light bulb made by General Electric. It is a G9 base type, which means it has two pins that are 9 millimeters apart. This bulb is designed to provide bright, white light with minimal energy consumption. It has a rated life of 2,000 hours and produ...

GE LATCH ASM - Part# WB10X25238 is a latch assembly for GE ovens. It is used to secure the oven door in place and keep it closed during operation. The latch assembly includes a metal bracket, two plastic clips, and a spring-loaded latch. The metal bracket attaches to the oven door frame and the tw...

The GE Rack Oven (Gy) - Part# WB48T10059 is a commercial-grade oven designed for baking and roasting. It features a large interior capacity that can accommodate up to six full-size sheet pans. The oven is equipped with an adjustable thermostat that allows you to set the temperature from 150°F to 5...

The GE Relay Board Part# WB27X25594 is a replacement part for General Electric ovens. It is a control board that controls the oven's heating elements, timer, and other functions. The board is responsible for controlling the temperature of the oven, as well as the timing of cooking cycles. It also ...

The GE RJ45 Connector and Harness - Part# WB27X30706 is a replacement part for a variety of GE appliances. It is an 8-pin modular connector used to connect Ethernet cables to devices such as computers, routers, and switches. The connector is made of high-quality materials and features gold-plated ...

GE SCR 8-18 AB TRT20NBS 5/8 - Part# WB01X21650 is a part number for a range burner control knob manufactured by General Electric. This knob is used to control the temperature of the range burner. It has an 8-18 AB thread size and a TRT20NBS 5/8 shaft size. The knob is made of black plastic and has...

GE SPACER DOOR - Part# WB02X25272 is a replacement part for GE refrigerators. It is a plastic spacer that fits between the refrigerator door and the cabinet frame. The spacer helps to ensure a proper fit and seal between the door and the frame, preventing air leaks and helping to keep food fresh. ...

GE Ui Com Harness Wire - Part# WB18X32734 is a replacement part for General Electric (GE) ovens. It is a wiring harness that connects the user interface control board to the oven’s components. This part is made of durable plastic and metal materials and is designed to withstand high temperatures. ...

GE Window Pack Assy - Part# WB56X22160 is a window assembly for GE refrigerators. It includes the window, frame, and gasket. The window is made of clear plastic and the frame is made of white plastic. The gasket seals the window to the refrigerator door to keep cold air in and warm air out. This p...

HINGE ASM (LT) - Part# WB10T10105 is a left-hand hinge assembly for a range or oven. It is made of metal and plastic and includes the mounting screws. The hinge is designed to provide support for the door of the range or oven, allowing it to open and close smoothly. The hinge also helps to keep th...

HINGE ASM (RT) - Part# WB10T10104 is a right-hand hinge assembly for ovens. It is a replacement part manufactured by General Electric and is used to replace worn or broken hinges on ovens. The hinge assembly includes the hinge, mounting screws, and instructions for installation. The hinge is made ...

A range oven door gasket, also known as a door seal, is a rubber or silicone seal that fits around the perimeter of the oven door. It helps to keep heat and air inside the oven cavity, ensuring that food cooks evenly and efficiently. The gasket also helps to prevent hot air from escaping and poten...

The Range Radiant Element Bracket (Part# WB02X20902) is a replacement part for a range or oven. It is used to secure the radiant element to the cooktop. The bracket is made of metal and has two mounting holes for attaching the element. It also has two slots for securing the element in place. This ...

The Receiver Hinge UPR (LT) - Part# WB10T10101 is a part used in many General Electric (GE) and Hotpoint ovens. It is a replacement part for the upper right side of the oven door. The hinge is made of metal and has two mounting holes on the top and bottom. It also has two plastic bushings that fit...

The RH Hinge Receiver (Part# WB10T10100) is a replacement part for a range of ovens and cooktops. It is used to attach the oven door to the range body. The part is made of metal and is designed to fit into the right-hand side of the range body. It has two holes for screws that are used to secure i...