Model: PB930SL3SS

Badge ASM - Part# WB02X29479 is a genuine OEM (Original Equipment Manufacturer) part from General Electric. It is a badge assembly for the GE range hoods. This badge assembly includes the front panel, the control knobs, and the light switch. It is used to replace a worn or damaged badge assembly o...

A drawer wedge is a small, plastic device that is used to keep a refrigerator drawer from sliding open. The drawer wedge is designed to fit into the groove of the refrigerator door and keep the drawer from opening. The drawer wedge is typically installed by pushing it into the groove of the refrig...

GE Broil Unit Asm - Part# WB44X30616 is a replacement part for General Electric ovens. It is a broil unit assembly that includes the broil element, the insulation, and the mounting bracket. The broil element is responsible for providing heat to the top of the oven cavity, while the insulation help...

The GE Cable Clip (Part# WB02X25982) is a small plastic clip designed to secure cables and wires in place. It is used to keep cords and wires organized and out of the way. The clip has two parts: a base that attaches to the wall or other surface, and a top that holds the cable in place. The clip i...

GE Element Haliant (Dual) - Part# WB30T10135 is a dual element haliant heating element designed for use in GE ovens. It is a two-piece unit that consists of an inner and outer element. The inner element is the main heating element and is used to heat the oven cavity. The outer element is a seconda...

GE Element Haliant 12 TRPL Part# WB30T10155 is a replacement heating element for GE electric ranges. It is a 12-inch triple haliant element that provides three different wattage levels to give you more control over your cooking. The element has a wattage of 2400/1800/1200 watts and features an adj...

GE Element Radiant 5.5 in (Part# WB30T10145) is a replacement radiant element for GE electric ranges. It is a 5.5 inch round element with two 6-inch long heating coils that provide even heat distribution across the cooking surface. The element has a wattage of 2400 and is designed to fit into most...

GE END PLATE LH DG - Part# WB07X29534 is a left-hand end plate for a General Electric (GE) dishwasher. This part is used to secure the interior components of the dishwasher, such as the spray arm, filter, and other parts. It is made of durable plastic and attaches to the left side of the dishwashe...

GE END PLATE RH DG - Part# WB07X29535 is a replacement part for GE brand ovens. It is the right-hand end plate for the oven door. This part is made of durable plastic and is designed to fit specific models of GE ovens. The end plate helps to keep the door securely closed and prevents heat from esc...

GE GASKET CONV FAN - Part# WB04T10080 is a replacement part for a GE range or oven. It is a fan gasket that is used to seal the fan motor to the oven cavity. The gasket helps to keep heat and air from escaping the oven cavity, ensuring that the oven operates efficiently. The gasket is made of dura...

GE Gasket Oven Part# WB04T10086 is a replacement part for ovens. It is a gasket that seals the oven door to the frame of the oven. The gasket helps to keep heat and air from escaping the oven, which helps to maintain an even temperature throughout the cooking process. The gasket is made of a durab...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Temperature Sensor Assembly - Part# WB21X22134 is a replacement part for ovens. It is designed to measure and monitor the temperature inside the oven cavity. The sensor assembly consists of a thermistor, which is a temperature-sensitive ...

GE Handle and End Cap Assembly (Part# WB15X29386) is a genuine OEM replacement part for GE microwaves. This assembly includes the handle, end cap, and mounting screws. The handle is made of plastic and the end cap is made of metal. This assembly helps to secure the door to the microwave and provid...

The GE Harness Wire Cat Module - Part# WB18X32670 is a replacement part for General Electric (GE) range ovens. It is a wiring harness that connects the oven’s electronic control board to the oven’s components, such as the bake and broil elements, the clock/timer, and other electrical components. T...

The GE Hidden Bake Harness - Part# WB18X32661 is a replacement part for GE ovens. It is a wiring harness that connects the bake element to the control board. The harness includes two wires, one for the bake element and one for the control board. The harness also includes a ground wire and a therma...

GE LAMP HALOGEN G9 - Part# WB08T10045 is a halogen light bulb made by General Electric. It is a G9 base type, which means it has two pins that are 9 millimeters apart. This bulb is designed to provide bright, white light with minimal energy consumption. It has a rated life of 2,000 hours and produ...

GE LATCH ASM - Part# WB10X25007 is a latch assembly manufactured by General Electric (GE). It is used in many GE appliances, such as refrigerators, ovens, and dishwashers. The latch assembly is designed to secure the door of the appliance and prevent it from opening unexpectedly. It consists of a ...

GE NUT HEX - Part# WB02T10608 is a hex nut manufactured by General Electric. It is made of steel and has a zinc plated finish. The nut has a coarse thread and is used to secure two or more parts together. It is designed to be used with bolts, screws, and other fasteners. The hex shape allows for e...

The GE Rack Oven (Part# WB48T10082) is a commercial-grade oven designed to provide consistent, even baking results. It features a unique design that allows for the baking of multiple racks of product at once, while still providing the same level of heat distribution and control as a traditional ov...

The GE RJ45 Connector and Harness - Part# WB27X30706 is a replacement part for a variety of GE appliances. It is an 8-pin modular connector used to connect Ethernet cables to devices such as computers, routers, and switches. The connector is made of high-quality materials and features gold-plated ...

The GE SCR 6-32 TR3 PNT 1.405 SCREW - Part# WB01T10137 is a self-tapping screw manufactured by General Electric. It is a 6-32 thread size, with a trilobular thread form and a 1.405 pitch. The screw is made of steel and has a black oxide finish for corrosion resistance. It has a pan head style with...

GE SCREW - Part# WB01M10002 is a screw used to secure the oven door to the oven frame. It is made of stainless steel and has a Phillips head. The screw measures 3/4 inch in length and has a thread diameter of 8-32. This part is used in many GE oven models, including JTP30, JTP45, JTP50, JTP60, JTP...

GE SCREW - Part# WB1X1258 is a screw manufactured by General Electric (GE). It is a 1/4-inch diameter, 8-32 thread size, Phillips head screw. It is made of steel and has a zinc plated finish. This screw is used to secure parts in many different types of appliances and equipment. It can be used to ...

GE SCREW 10-32 CA TRT15 3.06 - Part# WB02X24268 is a screw manufactured by General Electric (GE). It is a 10-32 thread size, coarse thread, and has a length of 3.06 inches. The head type is a truss head with a flat top and Phillips drive. The material is steel with a zinc plated finish for corrosi...

GE Switch Infinite Control - Part# WB24X25013 is a replacement part for GE range ovens. It is a temperature control switch that regulates the temperature of the oven. The switch has an infinite setting, which allows you to adjust the temperature in small increments, giving you more control over th...

GE Switch Infinite Control - Part# WB24X25152 is a replacement part for a range or oven. It is an infinite switch that controls the heat output of the range or oven. The switch has two terminals and is used to control the temperature of the appliance. It can be adjusted to any temperature setting ...

GE Window Pack Assy - Part# WB56X22160 is a window assembly for GE refrigerators. It includes the window, frame, and gasket. The window is made of clear plastic and the frame is made of white plastic. The gasket seals the window to the refrigerator door to keep cold air in and warm air out. This p...

Hinge Receiver - Part# WB10X29566 is a replacement part for a range of General Electric (GE) ovens. It is used to attach the oven door to the oven frame. The hinge receiver is made of metal and has two mounting holes for attaching it to the oven frame. It also has two slots for attaching the oven ...

Range Convection Fan Blade - Part# WB02X26501 is a replacement part for a range oven. It is used to circulate air in the oven during convection cooking. The fan blade is made of plastic and measures approximately 8 inches in diameter. It has a mounting hole in the center and four mounting holes ar...

The Range Radiant Element Bracket (Part# WB02X20902) is a replacement part for a range or oven. It is used to secure the radiant element to the cooktop. The bracket is made of metal and has two mounting holes for attaching the element. It also has two slots for securing the element in place. This ...