Model: MAT14PDAXW0

The Whirlpool Agitator, Part# WPW10131112, is a replacement part for Whirlpool washing machines. It is a white plastic agitator that fits into the top of the washer tub and helps to move the clothes around during the wash cycle. The agitator has a plastic post in the center that is connected to a ...

Whirlpool BOLT Part# WPW10137319 is a replacement part for Whirlpool washers. It is a plastic bolt that secures the agitator to the transmission shaft. This part is made of durable plastic and is designed to fit most Whirlpool washers. The bolt measures approximately 1-1/2 inches in length and has...

Whirlpool CAP - Part# WPW10131111 is a replacement part for Whirlpool washing machines. It is a plastic cap that fits over the top of the agitator in the washer tub. The cap helps to keep dirt and debris from entering the agitator and damaging it. It also helps to reduce noise from the agitator du...

Whirlpool CLIP Part# WP8519815 is a plastic clip used to secure the drain hose to the back of a washing machine. It is designed to fit Whirlpool washers and is made of durable plastic. The clip measures 1-1/2 inches in length and 1/2 inch in width. It has two holes for attaching the drain hose and...

The Whirlpool Clothes Washer Drive Motor Mounting Bracket RETAINER - Part# W10086010 is a replacement part for Whirlpool clothes washers. It is used to secure the drive motor to the mounting bracket. The retainer is made of plastic and has two holes for mounting screws. It also has two tabs that f...

Whirlpool CLUTCH - Part# WP8299642 is a replacement part for Whirlpool washing machines. It is a direct drive clutch assembly that helps to spin the washer tub during the spin cycle. The clutch is made up of several components including a drive hub, brake cam, brake band, and springs. The drive hu...

Whirlpool CNTRL-ELEC - Part# WPW10130701 is a replacement electronic control board for Whirlpool refrigerators. This part is used to replace the original electronic control board in Whirlpool refrigerators that have gone bad or are malfunctioning. The control board is responsible for controlling t...

Whirlpool COVER - Part# WPW10131114 is a replacement part for Whirlpool washing machines. It is a plastic cover that fits over the top of the washer and helps to protect the internal components from dust, dirt, and other debris. The cover also helps to keep moisture out of the washer, which can ca...

Whirlpool Hose-Fill Part# WP3949380 is a replacement part for Whirlpool washing machines. It is a fill hose that connects the water inlet valve to the water supply line. This part is made of durable plastic and rubber materials and is designed to provide a secure connection between the two compone...

Whirlpool LINING - Part# 3951993 is a replacement part for Whirlpool washing machines. It is a plastic lining that fits inside the washer tub and helps to protect the inner workings of the machine from water damage. The lining also helps to reduce noise and vibration from the spinning of the washe...

Whirlpool Motor-Drive Part# WPW10153111 is a motor drive assembly for Whirlpool washing machines. It is designed to replace the original motor drive in Whirlpool washers. This part includes the motor, pulley, belt, and mounting hardware. The motor drive is responsible for spinning the inner tub of...

Whirlpool Nut - Part# WPW10131123 is a replacement part for Whirlpool washing machines. It is a metal nut that secures the agitator to the drive shaft of the washer. This nut is used in many Whirlpool washers, including models with direct-drive motors. It is made of durable metal and designed to l...

Whirlpool RELAY - Part# WPW10133279 is a replacement part for Whirlpool washing machines. It is a three-terminal relay that is used to control the motor speed and direction of the washer. The relay works by switching power to the motor, allowing it to run in either forward or reverse. This part is...

Whirlpool Retainer Part# WPW10145155 is a replacement part for Whirlpool washing machines. It is a plastic retainer that holds the agitator in place. The retainer is designed to fit specific Whirlpool manufactured washing machine models including Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid...

Whirlpool RING-BAL Part# WP3956205 is a replacement part for Whirlpool washing machines. It is a plastic ring that fits around the outer edge of the agitator and helps to keep the agitator from wobbling or moving around during the wash cycle. The ring is made of durable plastic and is designed to ...

Whirlpool SCREW - Part# WPW10119828 is a replacement part for Whirlpool appliances. It is a metal screw that is used to secure the outer tub to the cabinet of the appliance. The screw measures 1/4 inch in diameter and is 1-1/2 inches long. It has a Phillips head and is made of zinc-plated steel fo...

Whirlpool SCREW - Part# WPW10131119 is a replacement part for Whirlpool-brand appliances. It is a metal screw with a Phillips head and measures 1/4 inch in diameter by 1/2 inch in length. This screw is used to secure the door switch on Whirlpool-brand dishwashers, washing machines, and dryers. It ...

Whirlpool SHIELD is a revolutionary new product from Whirlpool that helps protect your home from water damage. It is a smart water leak detection and shut-off system that can detect water leaks in your home and automatically shut off the water supply to prevent further damage. The system consists ...

Whirlpool SPRING - Part# WP8559387 is a replacement part for Whirlpool washing machines. It is a spring that is used to hold the lid of the washing machine in place. The spring is made of metal and measures approximately 1-1/2 inches in length and 1/4 inch in diameter. It has a black finish and is...

Whirlpool SWITCH - Part# WPW10135389 is a replacement part for Whirlpool washing machines. It is a three-position switch that controls the water level, temperature, and agitation speed of the washer. The switch has three positions: Low, Medium, and High. When the switch is in the Low position, the...

Whirlpool SWITCH-LID - Part# WP8054980 is a replacement part for Whirlpool washing machines. It is a lid switch assembly that helps to detect when the lid of the washing machine is closed. The switch will prevent the washer from operating if the lid is open, and will also signal when the lid has b...

Whirlpool Switch-Vlt Part# WPW10131838 is a replacement part for Whirlpool washing machines. It is a three-position switch that controls the agitation, spin, and drain functions of the machine. The switch has three positions: agitate, spin, and drain. When the switch is in the agitate position, it...

The Whirlpool VALVE - Part# WPW10151482 is a water inlet valve for a washing machine. It is used to control the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and close the valves when activated by an e...