Model: LTGE5FSP115TW01

The Speed Queen 1HP SVI ALT IPM CONTROL P - Part# 807175P is a commercial-grade washing machine control board designed for use in commercial laundry machines. It is a single-phase, 120V, 60Hz control board that features an integrated power module (IPM) and an advanced logic technology (ALT) system...

The Speed Queen AD-200 SID (Part# 802283) is a commercial-grade, heavy-duty dryer designed for use in commercial laundry facilities. It features a large 20 lb. capacity drum, an easy to use control panel, and a durable stainless steel construction. The dryer is designed to provide maximum drying e...

The Speed Queen Air Duct-Light Gray Mtwc - Part# D518433 is a high-quality air duct designed to provide superior air flow and energy efficiency. This air duct is made from a durable, lightweight aluminum material that is corrosion resistant and easy to install. It features an adjustable collar tha...

The Speed Queen Alliance Laundry Systems Cissell Amana Huebsch Univac PartsIPS Kenmore Clothes Gas Dryer Natural Gas to LP Propane Gas Conversion Kit - Part# 649P3 is a conversion kit that allows you to convert your natural gas dryer to run on propane gas. This kit includes all the necessary compo...

The Speed Queen ANCHOR,4 PACK-4051A - Part# 155P3 is a set of four heavy-duty anchor bolts designed to secure a washing machine to the floor. The bolts are made from high-grade steel and feature a corrosion-resistant finish for long-lasting durability. The anchors are designed to fit most standard...

The Speed Queen Assy Door Latch/Switch - Part# 803920 is a replacement part for Speed Queen washers and dryers. It is a two-piece assembly that includes the door latch and the switch. The door latch is a metal piece that fits into the door frame and locks the door when it is closed. The switch is ...

Speed Queen ASSY, DOOR SEAL (BLACK) - CO - Part# 804428P is a replacement part for Speed Queen washers and dryers. It is a black rubber door seal that fits around the door of the appliance to help keep it airtight and prevent water from leaking out. The part number 804428P is specific to this part...

The Speed Queen Balance Ring (Flw) Part# 804393 is a part used in washing machines. It is a plastic ring that helps to balance the load in the washer. The ring is placed between the inner and outer tubs of the washer and helps to evenly distribute the weight of the clothes and water during the spi...

The Speed Queen Base-Dryer (No Knockouts) - Part# D514245 is a commercial-grade dryer designed for heavy-duty use. It features a large 7.0 cubic foot capacity, allowing you to dry up to 18 pounds of laundry in one cycle. The dryer also features an adjustable temperature control, allowing you to cu...

The Speed Queen Base-Moisture Sensor (Part# D513738) is a device used to measure the moisture content of laundry. It is designed to be installed in the base of a washing machine and works by measuring the electrical resistance of the fabric. The sensor is connected to a control board, which then s...

Speed Queen Belt Drive-Micro-V Part# 804985 is a belt drive motor designed for use in Speed Queen commercial washers. This motor is designed to provide superior performance and reliability in a wide range of applications. The motor features a high-efficiency design that reduces energy consumption ...

Speed Queen Brace-Shipping Part# 807448 is a heavy-duty, adjustable brace designed to secure large appliances and other items during shipping. The brace is made of steel and features a powder-coated finish for durability. It includes two adjustable straps that can be used to secure the item in pla...

The Speed Queen Clamp-Ring (Flw) Flanged - Part# 803802 is a flanged clamp ring designed to secure the flange of a washing machine to the wall. It is made of durable steel and features a rubber gasket that helps to create a tight seal between the wall and the washing machine. The clamp ring is des...

The Speed Queen Cover Filter-Lint Light Gray - Part# D510502LG is a lint filter designed to fit Speed Queen washers. It is made of a durable, lightweight plastic material and features a light gray finish. The filter helps to keep lint and other debris from entering the washer’s drain system, helpi...

) Speed Queen COVER-OUTLET (NITROCARBURIZE - Part# D518524) is a part used in Speed Queen washing machines. It is a nitrocarburized outlet cover that is designed to protect the electrical connections of the machine from dust, dirt, and other debris. The nitrocarburizing process involves the applica...

The Speed Queen Door Seal (Gray) - Cobra - Part# 804429P is a replacement part for Speed Queen washers and dryers. It is made of high-quality rubber and designed to provide a tight seal between the door and the cabinet of the appliance. The seal helps to keep water, dirt, and other debris from ent...

The Speed Queen Drain Pump (100V-127V 60HZ) is a part of the Speed Queen washer and dryer system. It is designed to pump out water from the washer or dryer during the washing and drying cycles. The pump is made of durable plastic and features a motor that runs on 100V-127V, 60Hz power. The pump ha...

The Speed Queen Drawer-Dispenser Part# 803667 is a commercial laundry dispenser designed to dispense laundry detergent, fabric softener, and bleach into a washing machine. It is designed to be used in commercial laundromats and other large-scale laundry facilities. The drawer-dispenser features a ...

The Speed Queen DRYER OUTPUT CONTROL - Part# D513797P is a replacement part for Speed Queen dryers. It is a control board that regulates the temperature and cycle time of the dryer. The control board is responsible for controlling the motor, heating element, and timer. It also monitors the tempera...

Speed Queen Duct Combustion-Sgl Tstat - Part# D510131 is a single temperature thermostat designed to be used with Speed Queen duct combustion furnaces. This thermostat is designed to provide accurate temperature control for the furnace, allowing it to operate at the desired temperature. The thermo...

The Speed Queen FILTER-LINT-LIGHT GRAY - Part# D503980LG is a lint filter designed for use with Speed Queen top load washers. This filter is made of a durable plastic material and features a light gray finish. The filter is designed to trap lint, hair, and other debris from entering the washer's d...

The Speed Queen Foreign Object Deflector Blk - Part# 806308 is a black plastic deflector designed to fit onto the top of a Speed Queen washer. It is designed to help prevent foreign objects from entering the washer and damaging the internal components. The deflector is made of durable plastic and ...

The Speed Queen Front-Outer Tub - Part# 803770 is a replacement part for Speed Queen washers. It is the outer tub that holds the clothes during the washing cycle. The tub is made of durable stainless steel and has a capacity of up to 25 pounds of laundry. The tub is designed to be easy to clean an...

The Speed Queen Handle-Dispenser White - Part# 804227WP is a handle dispenser designed for use with Speed Queen commercial washers and dryers. This handle dispenser is made of durable white plastic and features a built-in coin slot for easy access to coins. The handle dispenser is designed to fit ...

The Speed Queen Harn.Motor Flw - Part# 806029 is a motor flow harness designed for use with Speed Queen washers and dryers. This part is used to connect the motor to the wiring harness, allowing the motor to operate properly. The part includes two connectors, one for the motor and one for the wiri...

Speed Queen HOSE,DISPENSER INLET - Part# 803849 is a replacement part for Speed Queen washers and dryers. It is a hose that connects the water inlet valve to the dispenser on the washer or dryer. This hose is made of durable rubber and is designed to withstand high temperatures and pressures. The ...

Speed Queen Hose-Detergent (Disp To Tub) - Part# 804717 is a replacement part for Speed Queen washers. It is a hose that connects the detergent dispenser to the tub of the washer. This part is made of durable plastic and rubber and is designed to withstand the high pressure and temperatures of a w...

The Speed Queen Inner Basket - Part# 804374P is a replacement part for Speed Queen washers. It is the inner basket that holds the clothes during the washing cycle. The inner basket is made of durable plastic and has a unique design that allows for maximum water and detergent penetration. It also f...

The Speed Queen Inner Door Bezel White - Part# 808095 is a replacement part for Speed Queen washers and dryers. It is a white plastic bezel that fits around the inner door of the appliance. The bezel helps to keep the door closed and secure, while also providing a finished look to the appliance. T...

The Speed Queen Inner Door Bezel White - Part# 808097 is a replacement part for Speed Queen washers and dryers. It is a white plastic bezel that fits around the inner door of the appliance. The bezel helps to protect the inner door from damage and also helps to keep dirt and debris out of the appl...

The Speed Queen KIT,INNER DOOR BEZEL - Part# 802307P is a replacement part for Speed Queen washers. It is a plastic bezel that fits around the inner door of the washer and helps to secure the door in place. The bezel is made of durable plastic and comes with mounting hardware for easy installation...

) The Speed Queen Label-Warning-Shock/Pinch (En - Part# 44324001) is a warning label designed to alert users of the potential for electric shock or pinching when using Speed Queen washers and dryers. The label is made of durable vinyl and features a bright yellow background with black text that rea...

The Speed Queen Motor and Rod Assembly - Part# 805726P is a genuine OEM replacement part for Speed Queen washers. This assembly includes the motor, drive shaft, and mounting bracket. The motor is a 1/2 HP, 120V, 60 Hz, 5.5A motor with a single-speed design. The drive shaft is made of steel and has...

The Speed Queen Outer Door Bezel White - Part# 808094 is a replacement part for Speed Queen washers and dryers. It is a white plastic bezel that fits around the outer door of the machine. The bezel helps to protect the door from damage and wear, as well as providing an aesthetically pleasing look....

The Speed Queen Screw 8Ab-16 X 3/4 Phil - Part# D505295 is a type of screw used in the Speed Queen brand of washing machines. It is a Phillips head screw with a size of 8Ab-16 X 3/4 inches. The Phillips head allows for easy installation and removal of the screw. The size of the screw is designed t...

Speed Queen Seal-Door Part# D515709 is a replacement part for Speed Queen washers. It is a rubber seal that fits around the door of the washer and helps to keep water from leaking out. The seal is made of durable rubber and is designed to last for years. It helps to keep the washer running efficie...

The Speed Queen Seal-Outer Tub Front - Part# 803801 is a replacement part for Speed Queen washers. It is a seal that fits around the outer tub of the washer and helps to keep water from leaking out. The seal is made of durable rubber and is designed to fit snugly around the outer tub, creating a t...

The Speed Queen Sensor-Bar (Part# D513737) is a commercial laundry machine accessory designed to provide an additional level of safety and security for commercial washers and dryers. The Sensor-Bar is a metal bar that is installed on the top of the washer or dryer, and it contains a motion sensor ...

The Speed Queen SHOCK ASSY - Part# 803777P is a replacement part for Speed Queen washers. It is a shock absorber assembly that helps to reduce vibration and noise during the spin cycle. The assembly includes two rubber shock absorbers, two metal mounting brackets, and four screws. The shock absorb...

Speed Queen SKIRT SHIELD, 36 - Part# 804173 is a protective cover designed to fit around the base of a Speed Queen commercial washer or dryer. The skirt shield is made of durable vinyl and helps protect the base of the machine from dirt, dust, and other debris. It also helps to reduce noise levels...

Speed Queen SPRING,EXTENSION - Part# 802285 is a replacement part for Speed Queen washers and dryers. It is a spring extension that helps to keep the door of the washer or dryer closed when not in use. The spring extension is made of metal and measures approximately 3 inches in length. It has a di...

The Speed Queen THERMISTOR-BLK - Part# D510523 is a replacement part for Speed Queen washers. It is a thermistor, which is a temperature-sensing device that helps regulate the temperature of the washer. The thermistor monitors the temperature of the water in the washer and sends signals to the con...

The Speed Queen THERMOSTAT-LIMIT-BLK - Part# D510702 is a thermostat limit switch designed for use with Speed Queen washers and dryers. This part is used to control the temperature of the appliance, ensuring that it does not get too hot or too cold. The thermostat limit switch is responsible for r...

The Speed Queen Valve-Gas-Sgl-120/6- - Part# D510506P is a gas valve for single phase 120/6 voltage. It is designed to be used with Speed Queen dryers and other compatible appliances. The valve is made of durable materials and features a 6-pin terminal connection. It has an adjustable pressure reg...

The Speed Queen Valve-Mixing 100-127V GHT Part# 807837P is a hot water mixing valve designed to provide hot water at a safe, comfortable temperature. It is designed to be used in commercial and residential applications. The valve is made of brass and features a stainless steel strainer for durabil...

The Speed Queen Washer Front Panel WH - Part# 802277WP is a replacement part for Speed Queen washers. It is a white panel that covers the front of the washer and includes the control knobs and dials. The panel is made of durable plastic and features a textured finish to help protect against scratc...