Model: JVM1441SH03

GE BASE-PLATE - Part# WB56X10212 is a replacement part for GE microwaves. It is a metal base plate that sits at the bottom of the microwave and helps to support the microwave’s internal components. The base plate also helps to protect the interior of the microwave from dust and other debris. This ...

The GE Bracket Lamp Part# WB02X11265 is a replacement part for various GE microwave ovens. It is a bracket lamp that is used to hold the light bulb in place in the oven. The bracket lamp is made of metal and has two mounting holes for easy installation. It also includes a wire harness and two scre...

GE Bracket-Air Guide "A" - Part# WB06X10147 is a replacement part for GE microwave ovens. It is a bracket that holds the air guide in place and helps to direct the air flow inside the oven. The bracket is made of metal and has two mounting holes for easy installation. This part is compatible with ...

The GE Bracket-Duct Upper Assy - Part# WB06X10148 is a replacement part for a variety of GE microwave ovens. It is used to secure the upper duct assembly to the top of the microwave oven. The bracket is made of metal and has two mounting holes for attaching it to the top of the oven. It also has t...

The GE Bracket-V/T Motor (Part# WB06X10165) is a direct replacement motor for various GE and Hotpoint range hoods. This motor is designed to provide reliable, quiet operation for your range hood. It features a bracket-style mounting system that allows for easy installation and removal. The motor i...

GE COUPLER TT HUB - Part# WB06X10420 is a replacement part for GE microwave ovens. It is a coupler hub that connects the turntable motor to the turntable tray. The coupler hub is made of plastic and has two metal prongs that fit into the slots on the underside of the turntable tray. The hub also h...

GE Cover-Glass Part# WB36X10216 is a replacement part for a variety of GE microwave ovens. It is a glass cover that fits over the top of the microwave oven, protecting the interior from dust and other debris. The cover is made of tempered glass, which is designed to be shatter-resistant and withst...

GE CRYSTAL Part# WB36X10070 is a replacement light bulb for GE microwave ovens. It is a halogen bulb that produces a bright white light. The bulb has an average life of 2,000 hours and is designed to fit into most GE microwaves. It has a voltage rating of 120 volts and a wattage rating of 20 watts...

The GE General Electric Hotpoint PartsIPS Kenmore Microwave Oven Range Vent Hood Aluminum Grease Filter - Part# WB06X10596 is a replacement filter for your range hood. It is made of aluminum and is designed to trap grease, smoke, and odors from the air in your kitchen. This filter helps keep your ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Microwave Oven Door Handle - Black - Part# WB15X10022 is a replacement part for a variety of microwave ovens. This handle is made of black plastic and features a spring-loaded latch that helps keep the door securely closed. The handle measures ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Microwave Oven Turntable Drive Motor - Part# WB26X10038 is a replacement part for many GE, RCA, Hotpoint, and PartsIPS Kenmore microwave ovens. This motor is responsible for rotating the turntable inside the microwave oven. It is a 120V AC moto...

GE Grille Assy - Part# WB07X10530 is a replacement part for GE microwave ovens. It is the outer grille that covers the front of the microwave. This part is made of stainless steel and has a black finish. It measures approximately 20-1/2 inches wide by 14-1/2 inches high. The grille has two mountin...

GE H.V. Capacitor Part# WB27X10240 is a high voltage capacitor designed for use in GE microwave ovens. It is a dual-section capacitor with a total capacitance of 1.5 microfarads and a rated voltage of 250 volts AC. The capacitor is designed to provide the necessary power to the magnetron, which is...

GE Hardware Installation - Part# WB01X10181 is a hardware installation kit for GE appliances. This kit includes all the necessary hardware and instructions needed to install a new GE appliance. The kit includes screws, nuts, washers, mounting brackets, and other hardware components. It also includ...

The GE Holder Rack - Part# WB06X10223 is a replacement part for a variety of GE microwave ovens. It is a metal rack that holds the turntable in place inside the oven cavity. The rack has two arms that fit into slots on either side of the turntable, and it also has four feet that rest on the bottom...

GE Hood Damper Assembly (Part# WB06X10436) is a replacement part for GE range hoods. It is a metal assembly that helps to control the airflow in the range hood. The damper assembly includes a metal frame, two dampers, and two springs. The frame is mounted to the underside of the range hood and the...

GE SCREW-WASHER - Part# WB01X10084 is a replacement part for GE appliances. It is a small metal washer with a hole in the center that is used to secure screws and other fasteners. The washer has a slightly larger diameter than the screw head, which helps to distribute the load of the fastener over...

The GE SMART BOARD Part# WB27X10871 is a replacement part for GE ovens. It is a control board that controls the oven’s temperature, bake time, and other functions. The board has an LED display that shows the current temperature and other settings. It also has a number of buttons that allow you to ...

GE SPRING-KEY - Part# WB05X10006 is a replacement part for GE range and ovens. It is a spring-loaded key that is used to activate the safety lock on the oven door. The key is inserted into the slot on the oven door and then turned to lock or unlock the door. This part helps to ensure that the oven...

GE STIRRER ASSY - Part# WB06X10416 is a replacement part for GE microwaves. It is a metal stirrer assembly that helps to evenly distribute heat throughout the microwave cavity. The stirrer assembly consists of a motor, fan blade, and mounting bracket. The motor is responsible for spinning the fan ...

GE Thermostat Part# WB27X10195 is a digital thermostat designed to control the temperature in a home or office. It is a single-stage, non-programmable thermostat that can be used with both heating and cooling systems. The thermostat has an easy-to-read LCD display and simple push button controls f...

GE TT SUPPORT ASSY W/ROLLERS - Part# WB06X10139 is a part used in some GE ovens. It is a support assembly with rollers that helps to support the oven door and keep it in place. The part includes two rollers, two brackets, and four screws. The rollers are made of plastic and the brackets are made o...

GE Ventilation Part# WB26X10042 is a replacement part for GE range hoods. It is a fan motor assembly that is used to circulate air in the range hood. The fan motor assembly includes the motor, blower wheel, and mounting bracket. The fan motor assembly helps to move air through the range hood to re...

GE Wire Saddle (Part# WB01X10135) is a part used in many GE and Hotpoint brand appliances. It is a plastic saddle that holds the wires in place on the back of the appliance. The saddle has two slots that hold the wires securely in place, and it also has two holes for mounting screws. This part is ...

PIN-HINGE Part# WB06X10060 is a replacement part for many GE microwaves. It is a plastic pin hinge that attaches the door to the microwave frame. The pin hinge is used to secure the door in place and allow it to open and close properly. The part number WB06X10060 is used for many GE microwaves, in...