Model: JVM1430WD01

A flange nut, also known as a frame nut, is a type of nut that has a wide flange at one end that acts as an integrated washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of...

GE BASE-PLATE - Part# WB56X10212 is a replacement part for GE microwaves. It is a metal base plate that sits at the bottom of the microwave and helps to support the microwave’s internal components. The base plate also helps to protect the interior of the microwave from dust and other debris. This ...

GE Bracket-Air Guide "A" - Part# WB06X10147 is a replacement part for GE microwave ovens. It is a bracket that holds the air guide in place and helps to direct the air flow inside the oven. The bracket is made of metal and has two mounting holes for easy installation. This part is compatible with ...

The GE Bracket-Duct Upper Assy - Part# WB06X10148 is a replacement part for a variety of GE microwave ovens. It is used to secure the upper duct assembly to the top of the microwave oven. The bracket is made of metal and has two mounting holes for attaching it to the top of the oven. It also has t...

GE Bracket-Powe Part# WB06X10122 is a mounting bracket designed for use with select GE microwaves. It is used to secure the microwave to the wall or cabinet. The bracket is made of metal and features two mounting holes for easy installation. It also includes four screws and anchors for added stabi...

The GE Bracket-V/T Motor (Part# WB06X10165) is a direct replacement motor for various GE and Hotpoint range hoods. This motor is designed to provide reliable, quiet operation for your range hood. It features a bracket-style mounting system that allows for easy installation and removal. The motor i...

GE COUPLER TT HUB - Part# WB06X10420 is a replacement part for GE microwave ovens. It is a coupler hub that connects the turntable motor to the turntable tray. The coupler hub is made of plastic and has two metal prongs that fit into the slots on the underside of the turntable tray. The hub also h...

GE CRYSTAL Part# WB36X10070 is a replacement light bulb for GE microwave ovens. It is a halogen bulb that produces a bright white light. The bulb has an average life of 2,000 hours and is designed to fit into most GE microwaves. It has a voltage rating of 120 volts and a wattage rating of 20 watts...

The GE Frame Control Panel (Part# WB07X10532) is a control panel designed for use with GE frame-style microwave ovens. It is a replacement part for the original control panel that came with the oven. The control panel allows you to adjust the settings of your oven, such as the cooking time, power ...

A microwave high voltage diode, also known as a magnetron diode, is an electrical component used in microwave ovens. It is responsible for converting the 120V AC power from the wall outlet into the high voltage DC power needed to operate the magnetron tube. The diode acts as a rectifier, allowing ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Microwave Oven Door Handle White - Part# WB15X10023 is a replacement part for a microwave oven. It is made of white plastic and is designed to fit the door of a microwave oven. The handle has two screws that attach it to the door, and it has a ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Microwave Oven Turntable Drive Motor - Part# WB26X10038 is a replacement part for many GE, RCA, Hotpoint, and PartsIPS Kenmore microwave ovens. This motor is responsible for rotating the turntable inside the microwave oven. It is a 120V AC moto...

GE General Electric RCA Hotpoint PartsIPS Kenmore Range Oven Microwave Light Bulb Lamp Holder Socket - Part# WB08X10016 is a replacement part for a range, oven, or microwave. It is a light bulb lamp holder socket that is designed to hold the light bulb in place and provide an electrical connection...

GE GLASS-COOK TOP (DROPSHIP) - Part# WB36X10167 is a replacement glass cooktop for GE brand stoves. It is made of durable, heat-resistant glass and is designed to fit perfectly into the existing stove opening. The cooktop features four burners, including two 6-inch and two 8-inch burners, as well ...

GE Grille Assy - Part# WB07X10533 is a replacement part for a variety of GE microwave ovens. It is the outer grille that covers the front of the microwave and provides protection from splatters and spills. The grille is made of durable stainless steel and features a sleek, modern design. It includ...

GE H.V. Capacitor Part# WB27X10240 is a high voltage capacitor designed for use in GE microwave ovens. It is a dual-section capacitor with a total capacitance of 1.5 microfarads and a rated voltage of 250 volts AC. The capacitor is designed to provide the necessary power to the magnetron, which is...

GE Hardware Installation - Part# WB01X10181 is a hardware installation kit for GE appliances. This kit includes all the necessary hardware and instructions needed to install a new GE appliance. The kit includes screws, nuts, washers, mounting brackets, and other hardware components. It also includ...

GE Hood Damper Assembly (Part# WB06X10436) is a replacement part for GE range hoods. It is a metal assembly that helps to control the airflow in the range hood. The damper assembly includes a metal frame, two dampers, and two springs. The frame is mounted to the underside of the range hood and the...

GE LATCH-BODY - Part# WB06X10289 is a replacement part for GE microwave ovens. It is the latch body that is used to secure the door of the oven when it is closed. The latch body consists of two parts: the latch and the body. The latch is a metal piece that slides into the body and locks into place...

GE Screw Handle Tapping Part# WB01X10290 is a replacement part for GE dishwashers. It is a plastic screw handle that is used to secure the dishwasher door to the frame. The handle has two screws that attach it to the door and frame, and it also has a small hole in the center of the handle that all...

GE SCREW-WASHER - Part# WB01X10084 is a replacement part for GE appliances. It is a small metal washer with a hole in the center that is used to secure screws and other fasteners. The washer has a slightly larger diameter than the screw head, which helps to distribute the load of the fastener over...

GE SPRING-KEY - Part# WB05X10006 is a replacement part for GE range and ovens. It is a spring-loaded key that is used to activate the safety lock on the oven door. The key is inserted into the slot on the oven door and then turned to lock or unlock the door. This part helps to ensure that the oven...

GE STIRRER ASSY - Part# WB06X10416 is a replacement part for GE microwaves. It is a metal stirrer assembly that helps to evenly distribute heat throughout the microwave cavity. The stirrer assembly consists of a motor, fan blade, and mounting bracket. The motor is responsible for spinning the fan ...

GE STIRRER MOTO - Part# WB26X10037 is a replacement motor for GE microwaves. It is used to stir the food in the microwave to ensure even cooking. The motor is designed to fit into a variety of GE microwaves and has a part number of WB26X10037. The motor is made from durable materials and has been ...

GE Thermostat Part# WB27X10194 is a thermostat designed for use with GE electric ovens. It is a temperature control device that regulates the temperature of the oven by sensing the temperature inside the oven and turning on or off the heating elements as needed. The thermostat is adjustable and ca...

GE Thermostat Part# WB27X10195 is a digital thermostat designed to control the temperature in a home or office. It is a single-stage, non-programmable thermostat that can be used with both heating and cooling systems. The thermostat has an easy-to-read LCD display and simple push button controls f...

GE TT SUPPORT ASSY W/ROLLERS - Part# WB06X10139 is a part used in some GE ovens. It is a support assembly with rollers that helps to support the oven door and keep it in place. The part includes two rollers, two brackets, and four screws. The rollers are made of plastic and the brackets are made o...

GE Ventilation Part# WB26X10042 is a replacement part for GE range hoods. It is a fan motor assembly that is used to circulate air in the range hood. The fan motor assembly includes the motor, blower wheel, and mounting bracket. The fan motor assembly helps to move air through the range hood to re...

GE Wire Saddle (Part# WB01X10135) is a part used in many GE and Hotpoint brand appliances. It is a plastic saddle that holds the wires in place on the back of the appliance. The saddle has two slots that hold the wires securely in place, and it also has two holes for mounting screws. This part is ...

PIN-HINGE Part# WB06X10060 is a replacement part for many GE microwaves. It is a plastic pin hinge that attaches the door to the microwave frame. The pin hinge is used to secure the door in place and allow it to open and close properly. The part number WB06X10060 is used for many GE microwaves, in...