Model: JS645SL3SS

Badge ASM - Part# WB02X29479 is a genuine OEM (Original Equipment Manufacturer) part from General Electric. It is a badge assembly for the GE range hoods. This badge assembly includes the front panel, the control knobs, and the light switch. It is used to replace a worn or damaged badge assembly o...

A drawer wedge is a small, plastic device that is used to keep a refrigerator drawer from sliding open. The drawer wedge is designed to fit into the groove of the refrigerator door and keep the drawer from opening. The drawer wedge is typically installed by pushing it into the groove of the refrig...

GE Bake Element - Part# WB44T10060 is a replacement bake element for GE ovens. It is a genuine OEM part and is made of metal and has two mounting brackets on the back. This bake element is rated at 240 volts and 3400 watts. It measures approximately 16-1/2 inches wide by 15-1/4 inches long. This b...

The GE Board Sensor, Part# WB27X28659, is a replacement part for General Electric (GE) ovens. It is a temperature sensor that monitors the oven temperature and sends signals to the electronic control board to regulate the oven temperature. The sensor is typically located in the back wall of the ov...

The GE Control Panel Trim Assembly (Part# WB07X29081) is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications. This part is used to replace the trim on the control panel of a variety of GE appliances, including microwaves, ovens, and ranges. The trim...

GE Cooling Fan Assembly (Part# WB26X29468) is a replacement part for many GE and Hotpoint brand refrigerators. It is designed to circulate air within the refrigerator to keep it cool. The fan assembly includes a motor, fan blade, and mounting bracket. The motor is designed to run at a specific spe...

GE Element Radiant 5.5 in (Part# WB30T10145) is a replacement radiant element for GE electric ranges. It is a 5.5 inch round element with two 6-inch long heating coils that provide even heat distribution across the cooking surface. The element has a wattage of 2400 and is designed to fit into most...

GE Element Radiant 9" Dual is a replacement part for electric ranges. It is a dual element that has two separate heating elements in one unit. The two elements are connected to the same control knob and can be used together or separately. This part is designed to replace the original radiant eleme...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Temperature Sensor Assembly - Part# WB21X22134 is a replacement part for ovens. It is designed to measure and monitor the temperature inside the oven cavity. The sensor assembly consists of a thermistor, which is a temperature-sensitive ...

GE Handle and End Cap Assembly (Part# WB15X29386) is a genuine OEM replacement part for GE microwaves. This assembly includes the handle, end cap, and mounting screws. The handle is made of plastic and the end cap is made of metal. This assembly helps to secure the door to the microwave and provid...

GE INSERT PLUG - Part# WB01X29474 is a replacement part for GE range ovens. It is a plastic plug that fits into the back of the oven and helps to secure the wiring harness to the back of the oven. The plug is used to prevent any wires from becoming loose or disconnected from the oven. It also help...

GE LATCH ASM - Part# WB10X29077 is a replacement part for General Electric (GE) ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the strike plate. The latch is mounted on the oven door and the strike plate is mount...

) GE MAINTOP GLASS ASM DG (DROPSHIP - Part# WB62X29068) is a replacement part for General Electric (GE) ovens. It is the main top glass assembly for the oven, which includes the glass top, the frame, and the hinges. This part is used to replace a broken or damaged main top glass assembly in GE oven...

GE Oven Control and Overlay Assembly (Part# WB27X32140) is a replacement part for GE ovens. It is a combination of the control panel and overlay, which are the two components that make up the user interface of an oven. The control panel contains all the buttons and knobs used to set the oven tempe...

The GE Rangetop Bumper (Part# WB02X29562) is a replacement part for GE gas ranges. It is a black plastic bumper that is used to protect the range top from scratches and other damage. The bumper fits around the edge of the range top and is secured with screws. It helps to keep the range top looking...

GE Rear Vent Trim and Gasket AS - Part# WB07X29475 is a replacement part for General Electric (GE) range hoods. It is used to seal the rear vent of the range hood to the wall. The trim and gasket are made of durable plastic and are designed to fit most GE range hoods. The trim is easy to install a...

GE SCR 8-32 TT FLP .270 - Part# WB01X23501 is a part used in many GE appliances. It is a self-tapping, flat head, 8-32 thread size screw with a .270 inch length. This part is used to secure various components within the appliance, such as panels, brackets, and covers. It is made of steel and has a...

GE SCREW - Part# WB01M10002 is a screw used to secure the oven door to the oven frame. It is made of stainless steel and has a Phillips head. The screw measures 3/4 inch in length and has a thread diameter of 8-32. This part is used in many GE oven models, including JTP30, JTP45, JTP50, JTP60, JTP...

GE SCREW 10-32 CA TRT15 3.06 - Part# WB02X24268 is a screw manufactured by General Electric (GE). It is a 10-32 thread size, coarse thread, and has a length of 3.06 inches. The head type is a truss head with a flat top and Phillips drive. The material is steel with a zinc plated finish for corrosi...

GE Switch Infinite Control - Part# WB24X25013 is a replacement part for GE range ovens. It is a temperature control switch that regulates the temperature of the oven. The switch has an infinite setting, which allows you to adjust the temperature in small increments, giving you more control over th...

GE Window Pack Assy - Part# WB56X22160 is a window assembly for GE refrigerators. It includes the window, frame, and gasket. The window is made of clear plastic and the frame is made of white plastic. The gasket seals the window to the refrigerator door to keep cold air in and warm air out. This p...

A HINGE DOOR, Part# WB10T10070, is a type of door that is designed to open and close with the help of hinges. The door is made up of two parts: the frame and the door itself. The frame is typically made from wood or metal and provides support for the door. The door itself is usually made from wood...

Range Terminal Cover (Part# WB02T10560) is a replacement part for many GE and Hotpoint range models. It is a plastic cover that fits over the terminal block on the back of the range. The terminal block is where the wires from the power cord attach to the range. The cover helps protect these connec...