Model: JKP75DP4BB

GE Bake TCO - Part# WB24T10080 is a replacement bake element for GE ovens. It is a genuine OEM part that is designed to provide reliable performance and long lasting durability. The bake element is made of metal and has two terminals on the end. It is located on the bottom of the oven and provides...

GE Blower Tangential Asm - Part# WB26T10060 is a replacement part for GE ovens. It is a blower assembly that helps to circulate air throughout the oven cavity. The blower assembly consists of a motor, fan blade, and housing. The motor is responsible for powering the fan blade which in turn circula...

The GE Board PC (ERC) Part# WB27T10569 is a computer board designed for industrial and commercial applications. It is a complete, all-in-one solution that includes an Intel Atom processor, memory, storage, and I/O ports. The board is designed to be used in a variety of applications such as industr...

The GE Element Bake Assembly (2100W) - Part# WB44T10109 is a replacement part for GE ovens. It is a heating element that is used to bake food in the oven. The element is made of metal and has two terminals at the end that connect to the wiring harness. The element is 2100 watts and measures approx...

GE Element Broil Asm - Part# WB44T10099 is a replacement part for General Electric ovens. It is the broil element assembly, which includes the heating element, mounting bracket, and insulation. The heating element is made of a nickel-chromium alloy and is designed to heat up quickly and evenly. Th...

GE GASKET OVN DR - Part# WB32T10012 is a replacement oven door gasket for General Electric ovens. This gasket is designed to provide a tight seal between the oven door and the oven cavity, helping to keep heat and moisture inside the oven. The gasket is made of durable materials that can withstand...

GE LATCH AND TAPE ASM - Part# WB14T10082 is a replacement part for GE ovens. It is a latch and tape assembly that is used to secure the oven door in place. The latch and tape assembly consists of two parts: the latch and the tape. The latch is a metal piece that attaches to the oven door and locks...

GE Motor PSC Conv - Part# WB26T10043 is a motor and fan assembly for a range hood. It is designed to replace the existing motor and fan assembly in many GE, Hotpoint, and Kenmore range hoods. The motor is a permanent split capacitor (PSC) type, which means it has two windings that are permanently ...

GE Rack Oven Part# WB48T10045 is a commercial grade oven designed for baking and roasting. It features a large capacity interior with adjustable racks that can accommodate up to five full-size sheet pans. The oven also has an electronic control panel with a digital display for easy operation and t...

GE SPACER DOOR HDL - Part# WB02T10524 is a part used in many GE ovens. It is a metal handle that attaches to the oven door and helps to keep the door in place when it is closed. The handle also helps to provide a secure grip when opening and closing the oven door. This part is made of durable meta...

GE SUPPORT CNTL TRM - Part# WB02T10376 is a control terminal manufactured by General Electric (GE). It is used to control the operation of a variety of appliances, such as refrigerators, ovens, dishwashers, and washers and dryers. The terminal has two parts: a base unit and a terminal board. The b...

GE TRIM BTM CAB 27 (BK) - Part# WB07T10541 is a black trim kit for a 27-inch GE bottom cabinet. This trim kit is designed to fit around the bottom of the cabinet and provide a finished look. The trim kit includes two pieces of black plastic trim that measure 27 inches wide and 1 inch high. The tri...

HINGE DOOR LT - Part# WB10T10113 is a replacement part for a range oven door. It is a lower hinge assembly that attaches to the bottom of the oven door and connects to the range oven body. The part includes two hinges, mounting screws, and instructions for installation. The hinges are made of meta...

HINGE DOOR RT - Part# WB10T10112 is a replacement part for a range oven door. It is a right-hand side hinge that attaches to the oven door and the range frame. This part is made of metal and has two mounting holes for attaching it to the oven door and frame. The hinge has a spring-loaded design th...