Model: JGS750EEF4ES

A door hinge is a hardware device that connects two pieces of material together, allowing them to swing open and closed. The door hinge is typically made of metal and consists of two plates with screw holes, connected by a pin or rod. The plates are mounted to the door frame and the door itself, a...

DOOR HINGE LT - Part# WB10X26464 is a left-hand door hinge manufactured by General Electric. It is designed to be used with a variety of GE ovens and ranges. The hinge is made of metal and features a black finish. It measures approximately 4 inches long and 1 inch wide. The hinge is designed to at...

GE BUMPER - Part# WB02K10171 is a replacement part for GE ovens. It is a black plastic bumper that is used to protect the oven door from damage when it is opened and closed. The bumper is designed to fit on the bottom of the oven door and has two mounting holes for easy installation. The bumper me...

The GE Control Board Part# WB27X25331 is a replacement part for various GE ovens. It is a circuit board that controls the oven’s functions, such as temperature, bake time, and other settings. The board also monitors the oven’s performance and can detect any problems with the oven’s operation. This...

GE Control Valve Assm - Part# WB19K10079 is a replacement part for a variety of GE gas ranges. It is an assembly that includes the valve, thermocouple, and pilot tube. The valve controls the flow of gas to the burners on the range. The thermocouple monitors the temperature of the pilot light and s...

GE Drawer Body Asm - Part# WB49X26422 is a replacement part for GE brand refrigerators. It is the drawer body assembly, which includes the frame and glides that support the refrigerator drawers. This part is used to replace a damaged or worn out drawer body assembly, allowing you to keep your refr...

GE Elbow 90 Asm - Part# WB28X20389 is a part used in some GE dishwashers. It is an elbow assembly that connects the water supply line to the dishwasher. The elbow assembly includes a 90 degree elbow, a plastic nut, and a rubber seal. The elbow is made of metal and has two ends, one end that connec...

GE END SIDE RAIL DG - Part# WB07X22001 is a replacement part for GE ovens. It is an end side rail that is used to secure the oven door in place. The part is made of durable metal and is designed to fit a variety of GE oven models. It includes two screws for installation and measures approximately ...

GE GASKET OVEN ASM - Part# WB32K10052 is a replacement part for GE ovens. It is a gasket that seals the oven door to the oven frame. The gasket helps to keep heat and moisture inside the oven, while also preventing air from entering the oven cavity. This part is made of durable materials and is de...

GE Grate Cast Part# WB31X20837 is a replacement part for a GE gas range. It is a cast iron grate that fits over the burner on the range. The grate is designed to evenly distribute heat and protect the burner from spills and splatters. It also helps to keep food from sticking to the burner. The gra...

GE Handle and End Cap Assembly (Part# WB15T10222) is a replacement part for GE range ovens. It is a black plastic handle and end cap assembly that is used to open and close the oven door. The handle has a textured finish for easy gripping, and the end cap snaps into place to secure the handle in p...

The GE Igniter Glowbar (Part# WB13X25261) is a replacement part for a gas oven. It is an electrical component that ignites the gas in the oven when it is turned on. The glowbar is made of a metal alloy that glows red hot when electricity passes through it, creating enough heat to ignite the gas. T...

The GE Ignition Module Part# WB13X24741 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic control board that controls the oven’s ignition system, which is responsible for lighting the oven’s burner. The module includes a spark igniter, spark electrode, and safety ...

GE LATCH AUTOMATIC - Part# WB10X20842 is a latch assembly designed for use with GE and Hotpoint ovens. It is used to secure the oven door in place when it is closed. The latch assembly consists of a metal frame, a plastic latch, and two springs. The metal frame attaches to the oven door and the pl...

GE LEG LEVELING - Part# WB02X20759 is a part used to level the legs of a GE range. It is a set of four adjustable legs that can be used to level the range and ensure it sits evenly on the floor. The legs are made of durable plastic and feature an adjustable height range from 1-1/4" to 2-3/4". The ...

The GE Oven Orifice Spud is a part used in gas ovens to regulate the flow of gas. It is a metal spud with a threaded end that screws into the gas valve. The orifice spud has a hole in the center that allows the gas to flow through it and into the oven. The size of the hole determines how much gas ...

GE Overlay T012 - Part# WB07X20573 is a replacement part for GE range and ovens. It is an overlay panel that covers the front of the range or oven. This part is made of stainless steel and is designed to fit specific GE models. It includes two screws for installation and measures approximately 11-...

GE SCREW - Part# WB01X24460 is a replacement part for General Electric (GE) appliances. It is a small, self-tapping screw used to secure the door handle to the door of the appliance. The screw is made of metal and has a Phillips head. It measures approximately 1/2 inch in length and has a thread d...

GE SCREW - Part# WB1K21 is a type of screw manufactured by General Electric. It is a self-tapping screw with a #2 Phillips head and is made of steel. The screw has a thread diameter of 0.138 inches and a thread pitch of 0.062 inches. It has an overall length of 1 inch and is zinc plated for corros...

GE SCREW 10-16 - Part# WB01K10116 is a 10-16 x 1/2 inch self-tapping screw manufactured by General Electric. It is made of steel and has a zinc plated finish. This screw is used to secure parts together in many different applications, such as securing panels, cabinets, and other items. The head of...

The GE Valve Burner 270 - Part# WB21X20612 is a replacement part for a variety of GE gas ranges. It is a gas valve burner that controls the flow of gas to the burners on the range. The valve burner has two settings, one for low flame and one for high flame. It is made of durable metal and plastic ...