Model: JGBS86SP1SS

Backguard Range Part# WB07X24826 is a replacement part for a range. It is a stainless steel backguard that fits select GE ranges. It is designed to protect the wall behind the range from heat and splatters. The backguard also helps to keep the kitchen looking neat and organized by hiding the wirin...

The GE Central Orifice Holder - Part# WB28X24762 is a replacement part for a range or cooktop. It is used to hold the orifice in place and secure it to the burner. The orifice is the small hole in the burner that allows gas to flow through and be ignited. This part is made of metal and is designed...

The GE Convection Element Part# WB44X10051 is a replacement part for GE ovens. It is a heating element that helps to circulate hot air throughout the oven cavity, allowing food to cook evenly and quickly. The element is made of metal and has two terminals at the back. It is approximately 16 inches...

GE Cover Vent Trim DD (Part# WB07X29140) is a replacement part for GE brand range hoods. It is a decorative cover that fits over the vent opening on the range hood. The cover is made of durable plastic and comes in a white finish. It is designed to fit GE brand range hoods with a width of 30 inche...

GE Electrodes & Harness H.V - Part# WB18X26985 is a high voltage electrode and harness assembly for use in General Electric (GE) ovens. This part is used to connect the oven's heating elements to the power source. It includes two electrodes, two harnesses, and a high voltage connector. The electro...

GE END SUPPORT DD - Part# WB07X29143 is a part for a General Electric microwave oven. It is an end support for the turntable tray in the oven. This part is made of metal and is used to hold the turntable tray in place. It has two mounting holes on either side and comes with two screws for installa...

GE END SUPPORT DD - Part# WB07X29144 is a part used in some GE ovens. It is an end support for the oven door. This part helps to keep the door in place and provide stability when opening and closing the oven door. The part is made of metal and is designed to fit into the existing holes on the oven...

GE FAN MOTOR CONVECT Part# WB26X28953 is a motor assembly for a convection fan in a range or oven. It is designed to move air around the oven cavity to ensure even cooking temperatures. The motor assembly includes the motor, fan blade, mounting bracket, and wiring harness. The motor is rated at 12...

The GE Frame Front Bumper (Part# WB02X28737) is a replacement part for select GE refrigerators. It is designed to protect the front of the refrigerator from damage caused by bumps and scrapes. The bumper is made of durable plastic and features a sleek, modern design that complements the look of yo...

) GE Glass Panel Door Asm (Dropshi - Part# WB56X24968) is a replacement part for GE refrigerators. It is a glass panel door assembly that includes the frame, hinges, and handle. The frame is made of stainless steel and the handle is made of plastic. The door has a clear glass panel that allows you ...

The GE Glowbar Igniter Part# WB13X25633 is a replacement part for a gas oven or range. It is an igniter that produces a spark to ignite the gas in the oven or range. The igniter is made of a metal alloy and has two ceramic glow bars that glow when heated by electricity. The igniter is connected to...

The GE Grate Assembly - Part# WB31X24736 is a replacement part for GE gas ranges. It is made of stainless steel and includes two grates, four grate feet, and four screws. The grates are designed to fit over the burners on the range and provide a stable cooking surface. The grate feet help to keep ...

GE Griddle Aluminum is a replacement part for GE ranges and cooktops. It is made of aluminum and is designed to fit over the burners on the range or cooktop. The griddle provides a flat cooking surface that can be used for cooking pancakes, eggs, bacon, and other breakfast foods. The griddle also ...

The GE Igniter Glowbar (Part# WB28X28781) is a replacement part for gas ovens and ranges. It is a metal bar with a ceramic end that glows red when heated by an electric current. The glowbar ignites the gas in the oven, allowing it to heat up and cook food. The glowbar is connected to the oven's el...

The GE Ignition Module Part# WB13X24741 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic control board that controls the oven’s ignition system, which is responsible for lighting the oven’s burner. The module includes a spark igniter, spark electrode, and safety ...

GE KNOB - Part# WB03X24818 is a replacement part for General Electric (GE) range and ovens. It is a plastic knob that controls the temperature of the oven. The knob has a black finish with white indicator lines and numbers. It is designed to fit specific GE models and replaces part numbers WB03T10...

The GE LF Orifice Holder - Part# WB28X24764 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two small screws that are used to secure it in place. The orif...

The GE Orifice Holder - Part# WB28X26621 is a replacement part for gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two screws that secure it to the range. It also has a small hole i...

The GE Orifice Holder LR - Part# WB28X24766 is a replacement part for a gas range. It is used to hold the orifice in place and is made of metal. The orifice holder is located inside the burner assembly and helps to regulate the flow of gas to the burner. This part fits specific General Electric ma...

GE Panel Side - Part# WB56X29670 is a replacement part for GE refrigerator models. It is a white plastic panel that fits on the side of the refrigerator and helps to keep the temperature consistent inside the appliance. The panel also helps to reduce noise from the refrigerator's compressor. This ...

The GE Plunger Switch - Part# WB24X27550 is a replacement part for many GE ovens. It is a single-pole, double-throw (SPDT) switch that is used to control the oven's bake and broil functions. The plunger switch has two terminals and a plunger that can be pushed in or pulled out to change the positi...

) GE Rangetop & Brkt Asm (Dropshi - Part# WB62X24822) is a replacement part for a GE range. It is an assembly that includes the rangetop and bracket. The rangetop is the top surface of the range, where the burners and other cooking elements are located. The bracket is used to secure the rangetop to...

The GE Safety Valve Dual - Part# WB21X28835 is a safety valve designed to prevent the over-pressurization of water heaters. It is a two-part valve that consists of an inlet and outlet. The inlet is connected to the water heater’s cold water supply line, while the outlet is connected to the hot wat...

GE SCR 8-18 AB HW 1/2 S - Part# WB01T10115 is a replacement part for a GE range. It is a surface burner switch, which controls the heat of the surface burner on the range. The switch has 8 positions, ranging from off to high heat. It also has an adjustable knob that allows you to set the desired t...

GE SCR 8-18 AB X 5/16S - Part# WB01X26995 is a stainless steel screw used in various GE appliances. It is an 8-18 AB x 5/16 inch stainless steel screw with a part number of WB01X26995. This screw is used to secure the control panel to the frame of the appliance. It is made from stainless steel for...

GE SCREW 10-16 - Part# WB01K10116 is a 10-16 x 1/2 inch self-tapping screw manufactured by General Electric. It is made of steel and has a zinc plated finish. This screw is used to secure parts together in many different applications, such as securing panels, cabinets, and other items. The head of...

GE Sensor Assembly (Part# WB24X25056) is a replacement part for GE ovens. It is a temperature sensor assembly that helps to regulate the temperature inside the oven. The sensor assembly includes a thermistor, which is a temperature-sensitive resistor that changes its resistance with changes in tem...

GE Sensor Assembly - Part# WB24X25557 is a replacement part for General Electric (GE) brand dryers. It is a temperature sensor assembly that helps regulate the temperature of the dryer. The sensor assembly includes a thermistor, which is a type of resistor that changes its resistance with temperat...

The GE Valve Burner 270 Part# WB21X20394 is a replacement part for a variety of GE gas ranges. It is a valve burner that controls the flow of gas to the burners on the range. The valve burner has two ports, one for the main burner and one for the pilot light. The valve burner is made of metal and ...

HINGE ASM LH (Part# WB10X28783) is a left-hand hinge assembly for General Electric (GE) and Hotpoint brand refrigerators. It is used to replace the existing left-hand hinge on the refrigerator door. The part number WB10X28783 is an OEM (Original Equipment Manufacturer) part, meaning it was made sp...

A Hinge Door, Part# WB10X26766, is a type of door that is attached to a frame by two or more hinges. This type of door is commonly used in residential and commercial applications. The hinges allow the door to swing open and closed, and they also provide support for the weight of the door. The hing...

The Receiver Hinge (Part# WB10X28563) is a part used in some General Electric (GE) and Hotpoint ovens. It is a replacement part for the hinge that connects the oven door to the oven frame. The hinge is made of metal and has two arms that attach to the oven door and frame. The arms are connected by...

The Receiver Hinge LH (Part# WB10X29636) is a part used in some General Electric (GE) ovens. It is the left-hand side of the receiver hinge assembly, which connects the oven door to the oven frame. The receiver hinge assembly consists of two parts: the left-hand side (LH) and right-hand side (RH)....

The Receiver Hinge RH (Part# WB10X29635) is a replacement part for a range or oven. It is the right-hand side of the hinge assembly and is used to attach the oven door to the range. The hinge consists of two parts: the receiver and the hinge arm. The receiver is mounted to the range frame and has ...