Model: JGBS62DEK2BB

The GE Bracket Regulator (Part# WB02X22890) is a replacement part for a range of GE gas ranges. It is used to regulate the flow of gas from the main gas line to the burners on the range. The regulator is mounted on a bracket and has two adjustable screws that can be used to adjust the flow of gas....

The GE Burner Oven Assy - Part# WB16X20253 is a replacement part for a variety of GE ovens. It is an assembly that includes the burner, oven base, and the necessary mounting hardware. The burner is made of stainless steel and has four adjustable flame settings. The oven base is made of porcelain-c...

GE Control Oven TO9 - Part# WB27X29136 is a replacement control oven for GE ovens. It is a genuine OEM part and is designed to replace the original control oven in your GE oven. This part includes the electronic control board, temperature sensor, and the overlay. The electronic control board contr...

GE Electrodes & Harness H.V - Part# WB18X26607 is a high voltage electrode and harness assembly for use in GE electric ranges. This part includes two electrodes, one harness, and one ground wire. The electrodes are used to create an electrical arc that ignites the gas in the oven burner. The harne...

GE GLASS OVEN DOOR (DROPSHIP) - Part# WB56X25503 is a replacement part for GE ovens. It is a glass door that fits onto the front of the oven and is designed to keep heat inside the oven while allowing you to see what's cooking. The door is made of tempered glass, which is stronger and more durable...

GE Grate Asm - Part# WB31X26620 is a replacement part for GE gas ranges. It is a grate assembly that includes two grates and four mounting screws. The grates are made of cast iron and have a black finish. The grates are designed to fit over the burners on the range, providing even heat distributio...

GE GROMMET - Part# WB02K10294 is a grommet used to seal the connection between two components in a variety of appliances. It is made of rubber and is designed to fit into a hole in the appliance. The grommet helps to prevent water, dust, and other debris from entering the appliance and damaging it...

The GE Ignition Module Part# WB13X24323 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic component that controls the ignition of the oven’s gas burners. The module works by sending an electrical signal to the spark igniter, which then ignites the gas. The module ...

GE Insulation Top Door - Part# WB35K10148 is a replacement part for GE ovens. It is a top door insulation panel that helps to keep the heat inside the oven and prevent it from escaping. The insulation panel is made of fiberglass and is designed to fit specific models of GE ovens. It has a white fi...

GE KNOB ASM - Part# WB03X24759 is a replacement part for a range or oven. It is a knob assembly that includes the knob, the shaft, and the clip. The knob is used to control the temperature of the oven or range. The clip attaches the knob to the shaft and holds it in place. This part is made of pla...

The GE LF Orifice Holder - Part# WB28X24764 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two small screws that are used to secure it in place. The orif...

GE Manifold Tube Supply - Part# WB28X24772 is a replacement part for GE refrigerators. It is a tube that supplies water to the refrigerator's ice maker and water dispenser. The tube is made of plastic and measures approximately 4 feet in length. It has two fittings on either end, one for the water...

The GE Orifice Holder - Part# WB28X26621 is a replacement part for gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two screws that secure it to the range. It also has a small hole i...

The GE Orifice Holder LR - Part# WB28X24766 is a replacement part for a gas range. It is used to hold the orifice in place and is made of metal. The orifice holder is located inside the burner assembly and helps to regulate the flow of gas to the burner. This part fits specific General Electric ma...

The GE Orifice Holder RR Part# WB28X24763 is a replacement part for GE gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas valve and the burner. The orifice holder is made of metal and has two screws that secure it to the gas valve. It also has a sma...

The GE Orifice Spud - Part# WB28X26625 is a replacement part for gas ranges and cooktops. It is used to regulate the flow of gas from the main gas line to the burner. The orifice spud is a small metal disc with a hole in the center that fits into the burner head. The size of the hole determines ho...

GE Overlay T09 - Part# WB07X26702 is a replacement part for GE microwave ovens. It is an overlay panel that fits over the existing control panel on the front of the microwave. The overlay panel has all of the buttons and labels for the various functions of the microwave, such as power level, timer...

GE TRIM DOOR - Part# WB07X25502 is a replacement part for GE ovens. It is a trim door that fits around the oven door and helps to keep the heat in while cooking. The trim door is made of stainless steel and has a black finish. It is designed to fit GE oven models JGBS30DEK2WW, JGBS30DEK3WW, JGBS30...

GE Vent Trim - Part# WB07X24847 is a replacement part for a range hood. It is designed to fit GE and Hotpoint brand range hoods. The trim is made of plastic and comes in black. It is used to cover the gap between the range hood and the wall, creating a finished look. The trim measures approximatel...

A hinge door, also known as a pivot door, is a type of door that is attached to the wall or frame by one or more hinges. The hinge allows the door to swing open in either direction and can be used for both interior and exterior doors. The Hinge Door Part# WB10X26678 is a genuine OEM part from GE A...

The Range Broil Element Clip (Part# WB01X26891) is a replacement part for a range or oven. It is used to secure the broil element to the back wall of the oven. The clip is made of metal and has two prongs that fit into two holes in the back wall of the oven. The clip then holds the broil element i...

Range control bracket - Part# WB02X24845 is a part used in some GE and Hotpoint ovens. It is a metal bracket that attaches to the back of the oven and helps to secure the range control panel in place. The bracket also helps to provide support for the range control panel, which can be easily damage...

Range End Support - Left - B - Part# WB07X24732 is a part used in some General Electric (GE) ovens. It is the left side support for the range end. This part helps to keep the range end in place and provide stability for the oven. It is made of metal and is approximately 8 inches long. The part num...

Range End Support - Right - Part# WB07X24733 is a part used in some GE ranges. It is the right-hand end support for the range, and it helps to keep the range stable and secure. The part is made of metal and is designed to fit a variety of GE ranges. It attaches to the back of the range with screws...