Model: JGBS18DEN7WW

GE Bottom Oven - Part# WB35K10042 is a replacement part for General Electric ovens. It is a bottom oven that fits in the lower portion of the oven cavity. This part is designed to replace the original bottom oven in GE ovens and can be used to replace a faulty or damaged bottom oven. The part incl...

GE BUMPER - Part# WB02K10180 is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with GE ranges. It is a black plastic bumper that is used to protect the range from scratches and dents when it is pushed against a wall or other surface. The bumper also helps to reduce n...

GE CKT SCREW - Part# WB01K10106 is a circuit screw manufactured by General Electric. It is used to secure electrical connections in a variety of applications, including wiring, circuit boards, and other electrical components. The screw is made of steel and has a zinc-plated finish for corrosion re...

GE END SUPPORT RT - Part# WB07K10265 is a part used in GE ovens. It is an end support rail that helps to hold the oven racks in place. The part is made of metal and has two mounting holes for easy installation. It measures approximately 8 inches long and 1 inch wide. This part is designed to fit a...

The GE General Electric Hotpoint PartsIPS Kenmore Gas Range Valve Control Assembly - Part# WB19K10044 is a replacement part for gas ranges. It is designed to control the flow of gas to the burners on the range. The assembly includes a valve, knob, and bracket. The valve is made of brass and has a ...

GE GRATE HAIRPIN (GRAY) - Part# WB31K10061 is a replacement part for GE gas ranges. It is a gray hairpin grate that fits on the cooktop surface of the range. The grate is made of durable cast iron and is designed to provide even heat distribution across the cooktop surface. The grate also helps pr...

GE GROMMET - Part# WB02K10294 is a grommet used to seal the connection between two components in a variety of appliances. It is made of rubber and is designed to fit into a hole in the appliance. The grommet helps to prevent water, dust, and other debris from entering the appliance and damaging it...

GE Guard Insulation Part# WB56K10032 is a high-performance insulation material designed to provide superior thermal protection for a variety of applications. It is made from a combination of glass fibers and polyester, which are bonded together with a special adhesive. The insulation material is d...

GE Handle (Part# WB15K10102) is a replacement handle for GE brand dishwashers. It is made of durable plastic and is designed to fit most GE dishwashers. The handle is black in color and features a textured finish for a secure grip. It measures approximately 4 inches wide by 2 inches tall and has t...

GE HANDLE WH - Part# WB15K10096 is a replacement handle for GE ovens. It is made of white plastic and has a chrome finish. The handle measures approximately 11 inches long and 1.5 inches wide. It is designed to fit most GE oven models, including the JB250DF, JB255DF, JB256DF, JB257DF, JB258DF, and...

GE Handle-Broil (Part# WB15K10008) is a replacement handle for GE ovens. It is designed to fit select GE oven models and can be used to replace a broken or worn out handle. The handle is made of durable plastic and features a black finish that will match the existing oven design. The handle measur...

GE Line Cord - Part# WB18K10036 is a power cord used to connect an electrical appliance to a wall outlet. It is designed for use with GE brand appliances and is UL listed for safety. The cord is 6 feet long and has a three-prong plug on one end and a three-prong receptacle on the other end. The co...

The GE Manifold Panel (Part# WB36K10711) is a part of the GE Profile Series of kitchen appliances. It is a replacement part for the manifold panel on the GE Profile Series range. The manifold panel is located behind the control knobs and serves as a connection point for the gas supply line, as wel...

The GE Orifice Holder Part# WB02K10361 is a part used in gas dryers to hold the orifice in place. The orifice is a small metal disc that regulates the flow of gas to the burner. The orifice holder is made of plastic and attaches to the burner assembly with two screws. It has two holes for the scre...

GE Oven Door Glass - Part# WB57K10121 is a replacement part for GE ovens. It is a tempered glass panel that fits into the oven door frame and seals the oven cavity from the outside environment. The glass panel helps to keep heat inside the oven while also providing a clear view of what is cooking ...

GE Overlay - Part# WB27K10266 is a replacement part for GE ovens. It is a metal overlay that fits over the existing control panel of the oven. The overlay covers the existing control panel and provides a new look to the oven. It also helps to protect the existing control panel from damage due to w...

GE Overlay T09 (Part# WB27K10256) is a replacement part for GE ovens. It is a control panel overlay that is used to replace the existing control panel on certain models of GE ovens. The overlay includes all the necessary buttons and labels for controlling the oven, including temperature, timer, an...

GE Rear Orifice H L 150N 9500 - Part# WB28K10191 is a part used in gas ranges and ovens. It is a rear orifice that connects the gas line to the burner. The orifice is made of brass and has a 1/2" NPT thread size. It has an opening of 0.150" and a maximum pressure rating of 9500 BTU/hr. This part i...

The GE Round Valve Burner Part# WB28K10578 is a replacement part for a variety of GE gas ranges. This round valve burner is designed to replace the original burner on the range and is made from durable metal construction. The burner has a round shape and features an adjustable air shutter that all...

GE TRIM BOTTOM ASM - Part# WB07K10269 is a part used in some GE ovens. It is a trim piece that goes along the bottom of the oven door. It is made of stainless steel and has a brushed finish. The trim piece helps to give the oven door a finished look and also helps to protect the door from damage. ...

GE TRIM POST LF - Part# WB07K10248 is a trim post designed for use with General Electric (GE) ovens. It is a metal post that is used to secure the oven door in place. The post has two holes on either side, which are used to attach the door to the oven frame. The post also has a spring-loaded latch...

GE TRIM POST LF WH - Part# WB07K10253 is a trim post manufactured by General Electric. It is used to secure the trim of a range or oven to the wall. The trim post is made of white plastic and measures 4-1/2 inches in length and 1-1/4 inches in width. It has two mounting holes for screws and comes ...