Model: JGBP28TEL1WW

The Burner Large (12000) - Part# WB16K10056 is a replacement burner for select GE gas ranges. It is designed to provide an even heat distribution across the cooking surface and features a 12,000 BTU output. The burner is constructed from durable stainless steel and includes a porcelain-enameled ca...

The GE Burner Knob (Part# WB03K10143) is a replacement part for GE gas ranges. It is a black plastic knob with a chrome finish and is used to control the heat of the burner. The knob has a metal shaft that fits into the range's control panel and is secured with a set screw. The knob has an off/on ...

The GE CAP-BURNER M (Part# WB29K10004) is a replacement burner cap for a variety of GE gas ranges. This part is designed to fit onto the top of the burner head and help to evenly distribute the heat from the flame. The cap also helps to protect the burner from dirt and debris, as well as helping t...

GE COOKTOP (WH) - Part# WB62K10048 is a white electric cooktop from General Electric. It is a 30-inch wide cooktop with four burners and a warming zone. The cooktop has two 6-inch and two 8-inch burners, each with its own power level. The warming zone is located in the center of the cooktop and ca...

GE END SUPPORT LF (WH) - Part# WB07K10196 is a white end support bracket designed for use with GE wall ovens. This part is used to secure the oven to the wall and provide additional support. It is made of durable metal and features a white finish that will blend in with most kitchen décor. The bra...

GE END SUPPORT RT (WH) - Part# WB07K10195 is a white end support for a range top. It is used to secure the range top to the countertop or cabinet. The end support is made of metal and has a white finish. It measures approximately 4-1/2 inches wide by 3-1/2 inches deep by 1-3/4 inches high. This pa...

The GE Front Orifice Holder (Part# WB28K10190) is a replacement part for a gas range. It is used to hold the orifice in place in the front of the range. The orifice holder is made of metal and has two screws that secure it to the range. It is designed to fit all GE gas ranges and can be used with ...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop WIRE HARNESS - Part# WB18K10035 is a replacement part for the stove range oven cooktop. It is a wire harness that connects the various components of the appliance to each other and to the power source. The harness includes ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range Oven CookTop SMALL BURNER CAP - Part# WB29K10002 is a replacement part for a range oven cooktop. It is designed to fit a variety of models and brands, including GE, Hotpoint, RCA, and Kenmore. The small burner cap is made of durable metal...

GE GRATE (GRAY) - Part# WB31K10045 is a replacement part for GE gas ranges. It is a gray, porcelain-coated steel grate that fits over the burner to provide a flat cooking surface. The grate is designed to evenly distribute heat and protect the burner from spills and splatters. It also helps to kee...

GE Harness Module - Part# WB18K10027 is a replacement part for GE dryers. It is a wiring harness that connects the main control board to the other components in the dryer. The module includes two wires, one for the motor and one for the heating element. This part is used to replace a faulty or dam...

The GE L BURNER CAP - Part# WB29K10007 is a replacement part for a range or cooktop. It is a round, flat metal cap that fits over the burner head on the range or cooktop. The cap helps to evenly distribute heat from the burner and protect it from spills and splatters. It also helps to keep the bur...

GE LATCH ASSEMBLY - Part# WB02K10140 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the catch. The latch is a metal piece that fits into the door frame and has a spring-loaded lever t...

GE Manifold Pipe Part# WB28K10028 is a replacement part for GE gas ranges. It is a manifold pipe that connects the gas burner to the gas valve. The manifold pipe is made of metal and has two ends, one end connects to the gas valve and the other end connects to the burner. The manifold pipe helps r...

GE Overlay T09-A (Part# WB27K10187) is a replacement part for GE ovens. It is an overlay panel that fits over the existing control panel of the oven. The overlay panel has a white finish and features an easy-to-read digital display with temperature and time settings. It also includes a timer, bake...

The GE Rear Orifice Holder (Part# WB28K10187) is a part used in gas ranges and cooktops. It is a metal bracket that holds the orifice, which is the small opening that controls the flow of gas to the burner. The orifice holder is located at the back of the range or cooktop and is secured with screw...

The GE SPARK MODULE 4+0 Part# WB13K10018 is a replacement part for the GE range and oven. It is a spark module that controls the spark ignition system on the range or oven. The spark module has four terminals and four wires that connect to the spark igniter, safety valve, and gas valve. The spark ...