Model: JGBP28SEM3SS

GE CAP END LF - Part# WB07K10263 is a replacement part for a range hood. It is the left side cap end for a GE range hood. This part is made of plastic and is used to cover the left side of the range hood. It helps to keep out dust and debris from entering the range hood, as well as providing an ae...

GE CAP END RT - Part# WB07K10262 is a replacement part for a range top. It is a cap end for the right side of the range top. This part is made of metal and is used to cover the end of the range top, providing a finished look. It also helps to protect the range top from dirt and debris. This part f...

GE Drawer Support Part# WB02K10158 is a replacement part for GE brand ovens. It is a metal support bracket that attaches to the oven drawer and helps to keep it in place. The part is made of durable metal and comes with mounting hardware for easy installation. This part is compatible with many GE ...

GE END SUPPORT LF - Part# WB07K10261 is a part used in GE ovens. It is an end support bracket that is used to secure the oven door to the oven frame. The part is made of metal and has two mounting holes for attaching it to the oven frame. It also has two tabs that fit into slots on the oven door, ...

The GE Front Orifice Holder (Part# WB28K10189) is a replacement part for a gas range. It is used to hold the orifice in place and secure it to the burner. The orifice holder is made of metal and has a threaded hole in the center for attaching the orifice. It also has two tabs on either side that a...

GE GASKET ASM. DOOR - Part# WB04K10013 is a replacement part for a General Electric (GE) oven door. It is a rubber gasket that fits around the perimeter of the oven door and helps to create an airtight seal when the door is closed. This helps to keep heat and moisture inside the oven, which improv...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop WIRE HARNESS - Part# WB18K10035 is a replacement part for the stove range oven cooktop. It is a wire harness that connects the various components of the appliance to each other and to the power source. The harness includes ...

GE GRATES Part# WB31K10034 is a replacement grate for GE gas ranges. It is made of porcelain-coated cast iron and is designed to fit select GE gas ranges. The grate measures approximately 12 inches by 9 inches and has four burners. It has a matte black finish and is easy to clean. The grate also f...

GE LATCH ASSEMBLY - Part# WB02K10141 is a replacement part for GE ovens. It is used to secure the oven door in place when it is closed. The latch assembly consists of two parts: the latch and the strike plate. The latch is a metal piece that attaches to the oven door and has a spring-loaded mechan...

The GE Rear Orifice Holder (Part# WB28K10187) is a part used in gas ranges and cooktops. It is a metal bracket that holds the orifice, which is the small opening that controls the flow of gas to the burner. The orifice holder is located at the back of the range or cooktop and is secured with screw...

A GE rotary switch is a type of electrical switch that uses a rotating contact arm to control the flow of electricity. The switch is typically used to control the power supply to an appliance or device. The GE rotary switch Part# WB24K10042 is a single-pole, double-throw (SPDT) switch with three t...

GE SCR 10-32 TT PNT 2.05 - Part# WB01K10074 is a range surface element manufactured by General Electric. It is a 10-inch, two-turn, surface element with a power rating of 2.05 kW (2,050 watts). This element is designed to fit most GE and Hotpoint electric ranges and cooktops. It has a 10-32 thread...

GE SCREW - Part# WB01K10070 is a genuine OEM (Original Equipment Manufacturer) part manufactured by GE. It is a mounting screw used to secure the oven door hinge to the oven frame. The screw is made of metal and has a Phillips head for easy installation. It measures approximately 1/2 inch in lengt...

GE SCREW 10-32 HXW 9/16 DWR - Part# WB01K10047 is a screw manufactured by General Electric. It is a 10-32 thread size, hex washer head type, and 9/16 inch diameter. The screw is designed for use in dryers and other appliances. It is made of steel and has a zinc plated finish for corrosion resistan...

The GE SPARK MODULE 4+0 Part# WB13K10029 is a four-burner spark module designed for use with GE gas ranges. This module is used to ignite the gas burners on the range and includes four spark electrodes and a spark generator. The spark generator produces a high voltage electrical current that is se...

The GE Valve Burner 270 (Part# WB21K10099) is a replacement part for gas ranges. It is designed to replace the existing valve burner on a range and provide an improved cooking experience. The valve burner is made of durable stainless steel and features a 270-degree rotation for maximum heat distri...

The GE Valve Burner 270 Part# WB21K10100 is a replacement part for GE gas ranges. It is a gas valve and burner assembly that is used to control the flow of gas to the burners on the range. The valve has two settings, high and low, which allow you to adjust the flame size. The burner has a 270 degr...