Model: JGBP28EEM4WH

GE BUMPER - Part# WB02K10180 is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with GE ranges. It is a black plastic bumper that is used to protect the range from scratches and dents when it is pushed against a wall or other surface. The bumper also helps to reduce n...

The GE CAP-BURNER L - Part# WB29K10006 is a replacement burner cap for a GE range. It is designed to fit the following models: JGP329, JGP333, JGP633, and JGBP87. This part is made of durable metal and has a black finish. It measures 4-1/2 inches in diameter and has four mounting holes for easy in...

The GE CAP-BURNER M (Part# WB29K10004) is a replacement burner cap for a variety of GE gas ranges. This part is designed to fit onto the top of the burner head and help to evenly distribute the heat from the flame. The cap also helps to protect the burner from dirt and debris, as well as helping t...

The GE CAP-BURNER S (Part# WB29K10009) is a replacement burner cap for GE gas ranges. It is designed to fit specific models of GE gas ranges and is made of durable metal. The cap helps to evenly distribute the heat from the burner and prevents food from sticking to the surface. It also helps to ke...

GE COOKTOP (WH) - Part# WB62K10048 is a white electric cooktop from General Electric. It is a 30-inch wide cooktop with four burners and a warming zone. The cooktop has two 6-inch and two 8-inch burners, each with its own power level. The warming zone is located in the center of the cooktop and ca...

GE Drawer Support Part# WB02K10158 is a replacement part for GE brand ovens. It is a metal support bracket that attaches to the oven drawer and helps to keep it in place. The part is made of durable metal and comes with mounting hardware for easy installation. This part is compatible with many GE ...

GE END SUPPORT LF - Part# WB07K10261 is a part used in GE ovens. It is an end support bracket that is used to secure the oven door to the oven frame. The part is made of metal and has two mounting holes for attaching it to the oven frame. It also has two tabs that fit into slots on the oven door, ...

GE END SUPPORT RT - Part# WB07K10265 is a part used in GE ovens. It is an end support rail that helps to hold the oven racks in place. The part is made of metal and has two mounting holes for easy installation. It measures approximately 8 inches long and 1 inch wide. This part is designed to fit a...

The GE Front Orifice Holder (Part# WB28K10190) is a replacement part for a gas range. It is used to hold the orifice in place in the front of the range. The orifice holder is made of metal and has two screws that secure it to the range. It is designed to fit all GE gas ranges and can be used with ...

GE GASKET FRONT FRAME - Part# WB04K10021 is a replacement part for GE brand ovens. It is a gasket that seals the front frame of the oven to the oven cavity. The gasket helps to keep heat and smoke from escaping the oven cavity, and also helps to keep moisture out of the oven cavity. This part is m...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop WIRE HARNESS - Part# WB18K10035 is a replacement part for the stove range oven cooktop. It is a wire harness that connects the various components of the appliance to each other and to the power source. The harness includes ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range Oven CookTop SMALL BURNER CAP - Part# WB29K10002 is a replacement part for a range oven cooktop. It is designed to fit a variety of models and brands, including GE, Hotpoint, RCA, and Kenmore. The small burner cap is made of durable metal...

GE GRATE (GRAY) - Part# WB31K10045 is a replacement part for GE gas ranges. It is a gray, porcelain-coated steel grate that fits over the burner to provide a flat cooking surface. The grate is designed to evenly distribute heat and protect the burner from spills and splatters. It also helps to kee...

GE GRATES Part# WB31K10034 is a replacement grate for GE gas ranges. It is made of porcelain-coated cast iron and is designed to fit select GE gas ranges. The grate measures approximately 12 inches by 9 inches and has four burners. It has a matte black finish and is easy to clean. The grate also f...

GE Handle - Black - Part# WB15T10161 is a replacement handle for General Electric ovens. It is made of black plastic and measures 8.5 inches in length. The handle has two mounting holes and comes with two screws for installation. This handle is designed to fit GE oven models JBP24, JBP26, JBP30, J...

The GE KNOB MINIVALVE Part# WB03K10216 is a replacement part for a range of GE gas ovens. It is a knob and valve assembly that controls the flow of gas to the oven burner. The knob has a metal stem that fits into the valve body, and when turned, it opens or closes the valve to control the flow of ...

The GE KNOB MINIVALVE (Part# WB03K10218) is a replacement part for a range or oven. It is a knob and valve assembly that controls the flow of gas to the appliance. The knob is used to turn the gas on and off, while the valve regulates the flow of gas. The valve is designed to shut off the gas supp...

The GE L BURNER CAP - Part# WB29K10007 is a replacement part for a range or cooktop. It is a round, flat metal cap that fits over the burner head on the range or cooktop. The cap helps to evenly distribute heat from the burner and protect it from spills and splatters. It also helps to keep the bur...

GE LATCH ASSEMBLY - Part# WB02K10140 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the catch. The latch is a metal piece that fits into the door frame and has a spring-loaded lever t...

GE ORIFICE-LP R - Part# WB28K10032 is a replacement part for a gas range. It is an orifice assembly that controls the flow of gas to the burners. The orifice is a small hole that allows the correct amount of gas to flow through it. This part is made of metal and has a threaded end for easy install...

GE Oven Glass Door OS1 - Part# WB57K10110 is a replacement oven door for select GE ovens. It is made of tempered glass and is designed to fit perfectly into the existing frame of the oven. The door features a stainless steel handle and comes with two hinges for easy installation. The door also has...

The GE Rear Orifice Holder (Part# WB28K10187) is a part used in gas ranges and cooktops. It is a metal bracket that holds the orifice, which is the small opening that controls the flow of gas to the burner. The orifice holder is located at the back of the range or cooktop and is secured with screw...

A GE rotary switch is a type of electrical switch that uses a rotating contact arm to control the flow of electricity. The switch is typically used to control the power supply to an appliance or device. The GE rotary switch Part# WB24K10042 is a single-pole, double-throw (SPDT) switch with three t...

The GE SPARK MODULE 4+0 Part# WB13K10029 is a four-burner spark module designed for use with GE gas ranges. This module is used to ignite the gas burners on the range and includes four spark electrodes and a spark generator. The spark generator produces a high voltage electrical current that is se...

The GE Valve Burner 270 (Part# WB21K10099) is a replacement part for gas ranges. It is designed to replace the existing valve burner on a range and provide an improved cooking experience. The valve burner is made of durable stainless steel and features a 270-degree rotation for maximum heat distri...

The GE Valve Burner 270 Part# WB21K10100 is a replacement part for GE gas ranges. It is a gas valve and burner assembly that is used to control the flow of gas to the burners on the range. The valve has two settings, high and low, which allow you to adjust the flame size. The burner has a 270 degr...