Model: JGBP28DEM1WW

The GE CAP-BURNER M (Part# WB29K10004) is a replacement burner cap for a variety of GE gas ranges. This part is designed to fit onto the top of the burner head and help to evenly distribute the heat from the flame. The cap also helps to protect the burner from dirt and debris, as well as helping t...

GE Drawer Support Part# WB02K10158 is a replacement part for GE brand ovens. It is a metal support bracket that attaches to the oven drawer and helps to keep it in place. The part is made of durable metal and comes with mounting hardware for easy installation. This part is compatible with many GE ...

GE END SUPPORT RT - Part# WB07K10265 is a part used in GE ovens. It is an end support rail that helps to hold the oven racks in place. The part is made of metal and has two mounting holes for easy installation. It measures approximately 8 inches long and 1 inch wide. This part is designed to fit a...

The GE Front Orifice Holder (Part# WB28K10189) is a replacement part for a gas range. It is used to hold the orifice in place and secure it to the burner. The orifice holder is made of metal and has a threaded hole in the center for attaching the orifice. It also has two tabs on either side that a...

GE GASKET ASM. DOOR - Part# WB04K10013 is a replacement part for a General Electric (GE) oven door. It is a rubber gasket that fits around the perimeter of the oven door and helps to create an airtight seal when the door is closed. This helps to keep heat and moisture inside the oven, which improv...

GE GASKET FRONT FRAME - Part# WB04K10021 is a replacement part for GE brand ovens. It is a gasket that seals the front frame of the oven to the oven cavity. The gasket helps to keep heat and smoke from escaping the oven cavity, and also helps to keep moisture out of the oven cavity. This part is m...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range Oven CookTop SMALL BURNER CAP - Part# WB29K10002 is a replacement part for a range oven cooktop. It is designed to fit a variety of models and brands, including GE, Hotpoint, RCA, and Kenmore. The small burner cap is made of durable metal...

GE Glider Drawer Left - Part# WB02K10060 is a replacement part for GE ovens. It is a left-side drawer glider that helps to smoothly open and close the oven door. The part is made of durable plastic and features a smooth gliding action that allows for easy access to the oven interior. The part is d...

GE GRATE (GRAY) - Part# WB31K10045 is a replacement part for GE gas ranges. It is a gray, porcelain-coated steel grate that fits over the burner to provide a flat cooking surface. The grate is designed to evenly distribute heat and protect the burner from spills and splatters. It also helps to kee...

GE Harness Module - Part# WB18K10027 is a replacement part for GE dryers. It is a wiring harness that connects the main control board to the other components in the dryer. The module includes two wires, one for the motor and one for the heating element. This part is used to replace a faulty or dam...

The GE KNOB MINIVALVE (Part# WB03K10218) is a replacement part for a range or oven. It is a knob and valve assembly that controls the flow of gas to the appliance. The knob is used to turn the gas on and off, while the valve regulates the flow of gas. The valve is designed to shut off the gas supp...

The GE L BURNER CAP - Part# WB29K10007 is a replacement part for a range or cooktop. It is a round, flat metal cap that fits over the burner head on the range or cooktop. The cap helps to evenly distribute heat from the burner and protect it from spills and splatters. It also helps to keep the bur...

GE LATCH ASSEMBLY - Part# WB02K10140 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the catch. The latch is a metal piece that fits into the door frame and has a spring-loaded lever t...

GE ORIFICE-LP R - Part# WB28K10032 is a replacement part for a gas range. It is an orifice assembly that controls the flow of gas to the burners. The orifice is a small hole that allows the correct amount of gas to flow through it. This part is made of metal and has a threaded end for easy install...

GE Oven Glass Door OS1 - Part# WB57K10110 is a replacement oven door for select GE ovens. It is made of tempered glass and is designed to fit perfectly into the existing frame of the oven. The door features a stainless steel handle and comes with two hinges for easy installation. The door also has...

GE Rear Orifice HR 150N 9500 Part# WB28K10188 is a part for a gas range. It is a rear orifice, which is the part of the gas range that connects the gas line to the burner. This particular part is designed for use with GE's HR 150N 9500 series of gas ranges. It has a maximum BTU rating of 150,000 B...

The GE Rear Orifice Holder (Part# WB28K10187) is a part used in gas ranges and cooktops. It is a metal bracket that holds the orifice, which is the small opening that controls the flow of gas to the burner. The orifice holder is located at the back of the range or cooktop and is secured with screw...

A GE rotary switch is a type of electrical switch that uses a rotating contact arm to control the flow of electricity. The switch is typically used to control the power supply to an appliance or device. The GE rotary switch Part# WB24K10042 is a single-pole, double-throw (SPDT) switch with three t...

The GE SPARK MODULE 4+0 Part# WB13K10018 is a replacement part for the GE range and oven. It is a spark module that controls the spark ignition system on the range or oven. The spark module has four terminals and four wires that connect to the spark igniter, safety valve, and gas valve. The spark ...