Model: JGBP26DEM1WW

GE COOKTOP (WH) - Part# WB62K10003 is a white electric cooktop from General Electric. It is a 30-inch wide cooktop with four burners and an easy-to-clean ceramic glass surface. The cooktop has two 6-inch and two 8-inch burners, allowing you to use different sizes of pots and pans. The 6-inch burne...

GE Drawer Support Part# WB02K10158 is a replacement part for GE brand ovens. It is a metal support bracket that attaches to the oven drawer and helps to keep it in place. The part is made of durable metal and comes with mounting hardware for easy installation. This part is compatible with many GE ...

GE END SUPPORT RT - Part# WB07K10265 is a part used in GE ovens. It is an end support rail that helps to hold the oven racks in place. The part is made of metal and has two mounting holes for easy installation. It measures approximately 8 inches long and 1 inch wide. This part is designed to fit a...

GE GASKET ASM. DOOR - Part# WB04K10013 is a replacement part for a General Electric (GE) oven door. It is a rubber gasket that fits around the perimeter of the oven door and helps to create an airtight seal when the door is closed. This helps to keep heat and moisture inside the oven, which improv...

GE GASKET FRONT FRAME - Part# WB04K10021 is a replacement part for GE brand ovens. It is a gasket that seals the front frame of the oven to the oven cavity. The gasket helps to keep heat and smoke from escaping the oven cavity, and also helps to keep moisture out of the oven cavity. This part is m...

The GE General Electric Hotpoint PartsIPS Kenmore Range Stove Cook Top BURNER GRATE - GRAY - Part# WB31K10027 is a replacement part for a range stove cook top. It is made of gray porcelain-coated steel and is designed to fit select GE, Hotpoint, PartsIPS, and Kenmore range stoves. This burner grat...

GE Glider Drawer Left - Part# WB02K10060 is a replacement part for GE ovens. It is a left-side drawer glider that helps to smoothly open and close the oven door. The part is made of durable plastic and features a smooth gliding action that allows for easy access to the oven interior. The part is d...

GE Harness Module - Part# WB18K10027 is a replacement part for GE dryers. It is a wiring harness that connects the main control board to the other components in the dryer. The module includes two wires, one for the motor and one for the heating element. This part is used to replace a faulty or dam...

The GE KNOB MINIVALVE (Part# WB03K10218) is a replacement part for a range or oven. It is a knob and valve assembly that controls the flow of gas to the appliance. The knob is used to turn the gas on and off, while the valve regulates the flow of gas. The valve is designed to shut off the gas supp...

GE LATCH ASSEMBLY - Part# WB02K10140 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the catch. The latch is a metal piece that fits into the door frame and has a spring-loaded lever t...

GE Orifice Spud Part# WB28K10376 is a replacement part for a gas range. It is an orifice spud, which is a metal tube that connects the gas burner to the gas supply line. The orifice spud has a threaded end that screws into the burner and a flared end that connects to the gas supply line. The orifi...

GE Overlay T09-B, Part# WB27K10265 is a replacement part for a range control panel. It is designed to fit over the existing control panel on a range and provide additional functionality. The overlay is made of durable plastic and features a black finish. It has nine buttons that are labeled with v...

The GE Panel Drawer (White) - Part# WB36K10033 is a replacement part for a range or oven. It is a white panel drawer that fits into the bottom of the range or oven and provides storage space for cookware and other items. The drawer is made of durable plastic and features a handle for easy access. ...

GE SCR 10-16PL PNT 2.22S - Part# WB01K10073 is a range surface element switch manufactured by General Electric. It is a single pole, double throw (SPDT) switch with a 10-16 amp rating and a 2.22 inch diameter mounting hole. The switch has two positions, one for the "on" position and one for the "o...

GE SCR 8 HD 10-32 - Part# WB01K10066 is a stainless steel screw that is used to secure the top grates of GE gas ranges. It is designed to fit into a 10-32 threaded hole and has a head diameter of 8mm. The screw is made from stainless steel for durability and corrosion resistance. It is an OEM (Ori...

GE SCREW 8-22 PL 1HX 71 - Part# WB01K10012 is a part manufactured by General Electric. It is a self-tapping screw made of steel and has a Phillips head. The screw has an 8-22 thread size, meaning that it has 8 threads per inch and the major diameter of the thread is 22mm. The “PL” in the part numb...

GE SW VALVE SERVICE 270 1WI - Part# WB24K10024 is a service valve used in gas-fired appliances. It is designed to provide a safe and reliable connection between the appliance and the gas supply line. The valve is designed to shut off the gas supply in the event of an emergency, such as a fire or e...

GE SW VALVE SERVICE 270 2WI - Part# WB24K10023 is a two-way service valve manufactured by General Electric. It is designed to be used in residential and commercial water systems. The valve is made of brass and features a 1/2" female NPT inlet and outlet, with a maximum pressure rating of 200 PSI. ...

GE TRIM BOTTOM ASM - Part# WB07K10250 is a replacement part for GE ovens. It is a trim bottom assembly that fits the bottom of the oven and helps to keep the heat in. The trim bottom assembly includes a metal frame, insulation, and plastic trim pieces. The metal frame is designed to fit snugly aro...