Model: JGBP25EEL2BB

The GE Burner Valve (Part# WB21K10050) is a replacement part for many GE gas ranges. It is a gas valve that controls the flow of gas to the burners on the range. The valve has two ports, one for the inlet and one for the outlet. The inlet port is connected to the gas supply line, while the outlet ...

The GE CAP-BURNER M is a replacement part for GE gas ranges. It is a burner cap that fits over the burner head to help protect it from dirt and debris. The part number WB29K10001 is specific to certain models of GE gas ranges. The cap is made of durable metal and has a black finish. It measures ap...

GE END SUPPORT GLOSS BLACK - Part# WB07K10193 is a black, glossy end support designed for use with GE ovens. It is used to provide additional support for the oven door and helps to keep it in place. The end support is made of metal and has a glossy black finish. It measures approximately 8 inches ...

GE END SUPPORT GLOSS BLACK - Part# WB07K10194 is a part used in GE appliances. It is an end support for the back of the appliance, and it is made of black gloss plastic. The part number WB07K10194 is used to identify this specific part. This end support helps to secure the back of the appliance an...

The GE Front Orifice Holder (Part# WB28K10190) is a replacement part for a gas range. It is used to hold the orifice in place in the front of the range. The orifice holder is made of metal and has two screws that secure it to the range. It is designed to fit all GE gas ranges and can be used with ...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop WIRE HARNESS - Part# WB18K10035 is a replacement part for the stove range oven cooktop. It is a wire harness that connects the various components of the appliance to each other and to the power source. The harness includes ...

GE Glider Drawer Left - Part# WB02K10060 is a replacement part for GE ovens. It is a left-side drawer glider that helps to smoothly open and close the oven door. The part is made of durable plastic and features a smooth gliding action that allows for easy access to the oven interior. The part is d...

GE GRATE (BLK) - Part# WB31K10033 is a replacement part for GE gas ranges. It is a black grate that fits over the burner to provide a flat cooking surface. The grate is made of cast iron and has a matte black finish. It measures approximately 12 inches by 12 inches and has four raised feet to keep...

GE Harness Module - Part# WB18K10027 is a replacement part for GE dryers. It is a wiring harness that connects the main control board to the other components in the dryer. The module includes two wires, one for the motor and one for the heating element. This part is used to replace a faulty or dam...

The GE KNOB-MINI VALVE - Part# WB03K10141 is a replacement part for a range of GE and Hotpoint ovens. It is a mini valve that controls the flow of gas to the oven burners. The valve has two knobs, one for controlling the flow of gas and one for controlling the temperature. The valve is made from d...

GE LATCH ASSEMBLY - Part# WB02K10140 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the catch. The latch is a metal piece that fits into the door frame and has a spring-loaded lever t...

GE Manifold Pipe Part# WB28K10028 is a replacement part for GE gas ranges. It is a manifold pipe that connects the gas burner to the gas valve. The manifold pipe is made of metal and has two ends, one end connects to the gas valve and the other end connects to the burner. The manifold pipe helps r...

GE Rear Orifice H L 150N 9500 - Part# WB28K10191 is a part used in gas ranges and ovens. It is a rear orifice that connects the gas line to the burner. The orifice is made of brass and has a 1/2" NPT thread size. It has an opening of 0.150" and a maximum pressure rating of 9500 BTU/hr. This part i...

GE Rear Orifice HR 150N 9500 Part# WB28K10188 is a part for a gas range. It is a rear orifice, which is the part of the gas range that connects the gas line to the burner. This particular part is designed for use with GE's HR 150N 9500 series of gas ranges. It has a maximum BTU rating of 150,000 B...

GE SCR 8 HD 10-32 - Part# WB01K10066 is a stainless steel screw that is used to secure the top grates of GE gas ranges. It is designed to fit into a 10-32 threaded hole and has a head diameter of 8mm. The screw is made from stainless steel for durability and corrosion resistance. It is an OEM (Ori...

GE SCREW 8-22 PL 1HX 71 - Part# WB01K10012 is a part manufactured by General Electric. It is a self-tapping screw made of steel and has a Phillips head. The screw has an 8-22 thread size, meaning that it has 8 threads per inch and the major diameter of the thread is 22mm. The “PL” in the part numb...

The GE SPARK MODULE 4+0 Part# WB13K10018 is a replacement part for the GE range and oven. It is a spark module that controls the spark ignition system on the range or oven. The spark module has four terminals and four wires that connect to the spark igniter, safety valve, and gas valve. The spark ...

GE SWITCH-BURNE Part# WB24K10017 is a replacement part for GE ovens. It is a switch burner control that helps regulate the temperature of the oven. The switch burner control works by controlling the flow of electricity to the heating elements in the oven. It has two settings, one for low heat and ...

) GE TRIM DOOR (W - Part# WB07K10104) is a replacement part for GE ovens. It is a white plastic trim door that fits around the oven door and helps to keep the heat in while cooking. The trim door also helps to keep the oven clean by preventing food and grease from splattering onto the outside of th...